Anise Oil Pure & USP NF FCC Food Grade Manufacturers, SDS MSDS Sheet |
Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site |
Search our website here:
--------- 
Anise Oil: CAS Number: 8007-70-3, EINECS EC Number: yyyyy, Molecular Formula: yyyyy, Molecular Weight: yyyyy, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses
etc available on these pages for Contract Manufacturing for Anise Oil.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Anise Oil Manufacturers
Anise Oil
Pure USP NF FCC Food Grade Suppliers
Organoleptic Properties:
Appearance: Fluid Liquid
Colour: Almost colourless to pale yellow
Odor: Characteristic Fruity odour, Sweet Aroma.
Solubility in 90% Alcohol: 1 Vol dissolve in 3 Vol of of 90% Alcohol
Anise Oil USP NF Grade:
Anise Oil is the volatile oil distilled with steam from the dried, ripe fruit of Pimpinella ansium L. (Fam. Apiaceae) or from the dried ripe fruit of Illicium verum Hook. f. (Fam. Illiciaceae).
NOTE: If solid material has separated, carefully warm the Anise Oil until it is completely liquefied, and mix before using.
Labeling: The label states the Latin binomial name and, following the official name, the part of the
plant source from which the article was derived. The label also states that if solid material has
separated, carefully warm oil until it is completely liquefied, and mix before using.
Solubility in 90 percent alcohol: One volume dissolves in 3 volumes of 90 percent alcohol.
Specific gravity: between 0.978 and 0.988.
Congealing temperature: not lower than 15C.
Angular rotation: between –2 and +1degrees.
Refractive index: between 1.553 and 1.560 at 20C.
Heavy metals: 0.004%.
Limit of phenols: A solution of recently distilled Anise Oil in 90 percent alcohol (1 in 3) is neutral to
moistened litmus paper, and the solution develops no blue or brownish color upon the addition of 1
drop of ferric chloride to 5 mL of the solution.
Anise Oil FCC Food Grade
CAS: [8007-70-3]
DESCRIPTION
Anise Oil occurs as a colorless to pale yellow, strongly refractive
liquid with the characteristic odor and taste of anise. It
is obtained by steam distillation of the dried ripe fruit of
Pimpinella anisum L. (Fam. Umbelliferae) or Illicium verum Hooker filius (Fam. Magnoliaceae).
Note: If solid material has separated, carefully warm
the sample until it is completely liquefied, and mix
before using it.
Function: Flavoring agent.
REQUIREMENTS
Identification: The infrared absorption spectrum of the sample
exhibits relative maxima at the same wavelengths as those
of a typical spectrum as shown in the section on Infrared
Spectra, using the same test conditions as specified therein.
Angular Rotation: Between +1° and –1°.
Phenols: Passes test.
Refractive Index: Between 1.553 and 1.560 at 20°.
Solidification: Point Not lower than 15°.
Solubility in Alcohol: Passes test.
Specific Gravity: Between 0.978 and 0.988.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Contact
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
21 May, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Anise Oil SDS, SAFETY DATA SHEET
MSDS Sheet, MATERIAL SAFETY DATA SHEET 08-Dec-20
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name & Other Names: Anise oil or Anise seed oil.
CAS Number: 8007-70-3
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 3) H227
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words (GHS-USA): None.
Hazard statements (GHS-USA):
H227: Combustible liquid.
Precautionary statements (GHS-USA):
P210: Keep away from heat, sparks, open flames, hot surfaces. - No smoking.
P260: Do not breathe mist, vapors, spray.
P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378: In case of fire: Use carbon dioxide (CO2), powder, alcohol-resistant foam for extinction.
P403+P235: Store in a well-ventilated place. Keep cool.
P405: Store locked up.
P273: Avoid release to the environment.
P501: Dispose of contents/container to comply with local, state and federal regulations.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
F Flammable
R10 Flammable.
2. COMPOSITION / INFORMATION ON INGREDIENTS
Product Name & Other Names: Anise oil or Anise seed oil.
CAS Number: 8007-70-3
4. FIRST-AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye Contact: Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
Skin Contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
Ingestion: Wash the mouth with water; seek medical advice immediately.
Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.
5. FIRE-FIGHTING MEASURES
Extinguishing Media Recommended: CO2, foam, dry chemicals, water spray.
Extinguishing Media Non-Recommended: Direct solid water jet.
Extinguishing Procedures: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. Keep away from ignition sources and naked flame.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Fire Protection: Keep away from ignition sources and naked flame.
7. HANDLING AND STORAGE
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkalis.
Fire Protection: Keep away from ignition sources and naked flame.
8. EXPOSURE CONTROL
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection: Avoid to breath directly on the product. Apply local ventilations when appropriate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear colorless to pale-yellow liquid.
Odor: Mild.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.98
Melting point/freezing point: Not available.
Initial boiling point and boiling range: 232C.
Flash point: 91.3C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Negligible in water.
Viscosity: Not available.
10. STABILITY AND REACTIVITY
Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid heat, contact with strong acids, alkali or oxidizers.
Decomposition: Carbon monoxide and unidentified organic compounds may be formed during combustion.
Hazardous Polymerization: Polymerization will not occur.
11. TOXICOLOGICAL INFORMATION
LD 50 ORAL/RAT (mg/Kg) 2250
LD 50 DERMAL/RABBIT (mg/Kg) >5000
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL INFORMATION
Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
Precautions: Prevent contamination of soil, ground and surface water. The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
13. DISPOSAL CONSIDERATIONS
In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.
14. TRANSPORT REGULATIONS
DOT USA, TDG Canada & ADR/RID Europe:
UN-Number: 1993
Class: NONE
Packing group: III.
Proper shipping name: Combustible liquid, n.o.s. (Anise oil)
IMDG/IMO: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
15. REGULATORY INFORMATION
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Fire Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************