Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Encapsulated Citric Acid Polymer or Hydrogenated Vegetable Oil Coated Manufacturers, SDS GHS MSDS Sheet
For SDS MSDS Sheet Click
SDS MSDS Sheet of Encapsulated Citric Acid Manufacturers
Encapsulated Citric Acid
Fracturing & Food Grade
In the USA, UAE, Iran Iraq, Kuwait, Saudi Arabia and other oil producing areas, several hundred chemical compounds are used in hydraulic fracturing also called fracking, fracing or frac. In some areas like UK only 'Non-Hazardous' chemicals are permitted for fracturing fluids by the Environment Agency. All chemicals have to be declared publicly and increasingly, food additive based chemicals are available to allow fracking to take place safely.
Mubychem is an internationally preferred source for Stimulation Chemical,s Hydraulic Fracturing Chemicals and Industrial Chemicals. We serve various industries and oil & shale gas producing countries like USA UAE, Kuwait, Iran, Iraq, Saudi Arabia, UK, Europe India etc. We are never too far from your well-site with multiple 24/7 company owned or rented warehouses in the India, USA and across the globe. With customers in several countries, we sell almost all the important industrial and fracturing chemicals.
Encapsulated Citric Acid is offered in two differnt types of coating. One with polymer coating is used mainly in fracturing industry and the one which is coated with hydrogenated vegetable oil is used in bakery or food industries apart from fracturing.
Polymer coated slow release or extended release citric aid is used in shale gas fracturing. It relases slowly with time, like say less than 10% in 1 hour and balance in a day or so.
Citric Acid coated with hydrogenated palm oil or hydrogenated soybean oil will have a sharp release at say 55-60C (about 130-140F) or say 65-70C (about 150-160F). This can be called temperature based release.
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last : 22 March, 2017
Shale Gas Hydraulic Fracturing Chemicals Acetic Acid Solution Ammonium Persulfate or Persulphate Acid Viscosifier Acid Emulsifier ATMP Phosphonate, Amino tris (methylene phosphonic acid) Ammonium Bifluoride Barium Sulfate Remover BHMT or BHMTPMPA Biocide Solution Boron & Zirconium based Guar Cross Linker BME Iron Reducer or Dissolver Calcium Chloride Anhydrous & Solution Cement Defoamer Citric Acid Solution Clay Stabilizer Corrosion Inhibitors DETA Phosphonate or DTPMP Phosphonate Didecyl Dimethyl Ammonium Chloride Solution Diverting Agent Encapsulated Citric Acid Encapsulated Gel Breaker Fe46 Liquid Iron Control Blend Friction Reducer Flow Back Aid, Water Recovery Surfactant Foam or Finofoam 810 Foam 418 Heavy Crude Defoamer Gel Sweep Glycerin Solution Glutaraldehyde Solution HP HT Lube Hydroxy ethylidene diphosphonic acid, HEDP phosphonate Hydrogen Sulfide Scavenger Potassium Chloride KI (Stabilised) & Initiator KCl Substitute or Potassium Chloride Substitute Non Emulsifier Paraffin Dispersant Potassium Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Phthalic Acid, EDTA, BPA based Diverting Agents Scale Inhibitor Chemicals Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Tetrakis Hydroxymethyl Phosphonium Sulfate THPS Xanthan Gum Slurry Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Encapsulated Citric Acid MSDS Sheet, SDS Material Safety Data Sheet
Section 1 - Chemical Product and Company Identification
MSDS Name: Encapsulated Citric Acid
CAS No.: Mixture.
Intended Use: Oil & Gas Exploration
Molecular Weight: Not applicable
Chemical Formula: Not applicable
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Sensitization, Skin Category 1
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
H317: May cause an allergic skin reaction
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P302+ P352 - IF ON SKIN: Wash with plenty of soap and water.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
Section 3 - Composition, Information on Ingredients
Chemical Name: Citric acid is the main component.
Percent: Less than 85%. The product is citric acid crystals coated with non-hazardous polymer or hydrogenated vegetable oil.
Section 4 - First Aid Measures
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub or keep eyes closed.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Use agent most appropriate to extinguish fire. Do NOT get water inside containers.
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Very fine particles of Citric acid can cause a fire or explosion. Eliminate all ignition sources. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Remove all sources of ignition. Provide ventilation. Spill of Citric acid may be neutralized with lime. Do not get water inside containers.
Section 7 - Handling and Storage
Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - Exposure Controls, Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Section 9 - Physical and Chemical Properties
Appearance: It is off-white to brownish granules.
Odor: It is odorless.
Density: 1.5 gm/cc approximate.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: NA
Section 10 - Stability and Reactivity
Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation, moisture, exposure to moist air or water.
Incompatibilities with Other Materials: Oxidizing agents, sulfides (inorganic, e.g. ferric sulfide, lead sulfide, sodium sulfide), metal nitrates, alkali carbonates, alkalis, potassium tartrate, acetates, bicarbonates.
Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide and chloro compounds.
Hazardous Polymerization: Will not occur.
Section 11 - Toxicological Information
Oral rat LD50: 3 gm/kg; irritation skin rabbit: 500 mg/24H mild; eye rabbit: 750 ug/24H severe.
Carcinogen: Not defined as carcinogen.
Section 12 - Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Section 13 - Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with local requirements.
Section 14 - Transport Information
Section 15 - Regulatory Information
TSCA: CAS# 77-92-9 is listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
Section 302 (RQ): None of the chemicals in this material have an RQ.
Section 302 (TPQ): None of the chemicals in this product have a TPQ.
CAS # 77-92-9: acute.
CAS# 77-92-9 is listed on Canada's DSL List. CAS# 77-92-9 is listed on Canada's DSL List.
Citric acid has a WHMIS classification of D2B.
CAS# 77-92-9 is listed on Canada's Ingredient Disclosure List.
EINECS: CAS# 77-92-9 is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada): CLASS E: Corrosive solid for Citric Acid.
DSCL (EEC): R36/37/38- Irritating to eyes, respiratory system and skin. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39- Wear suitable gloves and eye/face protection.
HMIS perceived: Health Hazard: 2; Fire Hazard: 1; Reactivity: 0; Personal Protection: E
NFPA perceived: Health: 2; Flammability: 1; Reactivity: 0
Protective Equipment: Gloves (impervious). Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Safety glasses.
Section 16 - Additional Information
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.