Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
ISO9001 ISO 22000 HACCP GMP FSSAI Halal Kosher
Bookmark this Web Site Email This Page Info to a Colleague or Yourself

 

Search our website here

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Encapsulated Fumaric Acid Manufacturers, SDS GHS MSDS Sheet

For SDS MSDS Sheet Click
SDS MSDS Sheet of Encapsulated Fumaric Acid Manufacturers

Encapsulated Fumaric Acid
Based on Pure USP FCC Food Grade
Encapsulated fumaric acid

Specfications of Encapsulated Fumaric Acid:
Assay of Fumaric Acid: 80-85%
Percentage of Hydrogenated Vegetable Oil Coating: 15-20%
Lead: Not more than 2 mg/kg.
Maleic Acid: Not more than 0.1%.
Residue on Ignition: Not more than 0.1%.
Water: Not more than 0.5%.

Fumaric acid has E number E 297 used in beverages and baking powders. Encapsulated Fumaric Acid is a white powder made by spraying hydrogenated vegetable oil over the acid, that allows the fumaric acid to react in two stages. First stage in the bowl and second stage is released in the baking process. This improves the effectiveness of its preserving qualities to extend shelf life.

Fumaric acid is used in tortilla applications where a low pH is desired. Encapsulated fumaric acid is designed to give you greater control over the production process, quality and cost of bread and tortilla. It kick-start leavening during mixing, and regulate pH during baking. Encapsulation ensures that yeast development is not inhibited by the presence of active acid during the proofing process, which decreases the amount of yeast required. Controlled release of the fumaric acid during baking lowers the pH at just the right time to improve the performance of the preservative calcium propionate.

Manufacturers:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA & Canadian Customers may
e-mail: usa@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

India Manufacturer Logo
Copyright and Usual Disclaimer is Applicable.
Last : 22 March, 2017

List of All the IP BP USP FCC ACS Grades of Chemicals
Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items
Ammonium Bicarbonate Ammonium Bromide
Ammonium Carbonate Ammonium Chloride
Ammonium Molybdate Ammonium Sulfate
Aluminum Chloride Benzyl Alcohol
Borax; Sodium Borate Boric Acid
Calcium Acetate Calcium Chloride
Calcium Gluconate Calcium Hydroxide
Calcium Lactate Calcium Oxide
Calcium Saccharate Calcium Sulfate
Chromic Chloride Citric Acid
Calcium Citrate Copper Gluconate
Copper Sulfate, Cupric Sulphate Cupric Chloride
Ferrous Fumarate Ferrous Gluconate
Fumaric Acid Ferrous Sulphate
Ferric Sulfate Ferric Ammonium Citrate
Ferric Chloride Picric Acid
Gentian Violet Mannitol
Magnesium Chloride Magnesium Gluconate
Magnesium Lactate Dihydrate Magnesium Sulfate
Magnesium Trisilicate Maleic Acid
Malic Acid BP USP Manganese Gluconate
Manganese Sulfate Manganese Chloride
Methylene Blue Potassium Bromide
Potassium Chloride Potassium Gluconate
Potassium Bitartrate, Cream of Tartar Potassium Hydroxide
Potassium Iodide Potassium Iodate
Potassium Sorbate Sodium Acetate
Sodium Bicarbonate Sodium Butyrate
Sodium Caprylate Sodium Fluoride
Sodium Gluconate Sodium Hydroxide Pellets
Sodium Iodide Sodium Lactate
Sodium Perborate Sodium Propionate
Sodium Thiosulfate Sodium Sulfate
Stannous Chloride Dihydrate Zinc Carbonate
Zinc Chloride Zinc Gluconate
All Product List

Exporter & ImporterBy Air ExportsExporters & ImprotersEncapsulated fumaric acid manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Encapsulated Fumaric Acid GHS SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product: Encapsulated Fumaric Acid.
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Serious eye damage/eye irritation Category 2A

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H319: Causes serious eye irritation.

Precautionary statements:
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
HMIS (Perceived): Health hazard: 1, Flammability: 1, Physical hazards: 0
NFPA (Perceived): Health hazard: 2, Fire: 1, Reactivity Hazard: 0

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Symbol: Xi Irritant.
Risk Phrases: R36 – Irritating to eyes.

3. Composition/Information on Ingredients

Ingredient-1: Fumaric Acid
CAS No.: 110-17-8
EINICS EC-No.: 203-743-0
Percent
: 80-85%

Ingredient-2: Hydrogenated Soybean Oil
CAS No.:  8016-70-4 (also 68334-28-1)
EINICS EC-No.:  269-820-6
Percent
: 15-20%

4. First Aid Measures

Always get medical attention after the first aid is over.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill:
Corrosive solid. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources.

7. Handling and Storage

Keep Encapsulated Fumaric Acid in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostatic discharge.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Encapsulated Fumaric Acid is white to off-white crystals or powder.
Odor: Faint odor.
Solubility: Soluble in hot water.
% Volatile by volume @ 21C (70F): 0

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Excessive heat, Strong oxidizers.
Conditions to Avoid: Heat, dusting and incompatibles.

11. Toxicological Information

For Fumaric Acid:
LD50 Oral - Rat - female: 9.300 mg/kg
LD50 Dermal - Rabbit - female: 20.000 mg/kg
LD50 Intraperitoneal - Mouse: 100 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

12. Ecological Information Toxicity

For Fumaric Acid:
Toxicity to fish daphnia and bacteria:
Toxicity to fish mortality: Danio rerio (zebra fish) - 245 mg/l - 48 h
Toxicity to fish semi-static test LC50: Danio rerio (zebra fish) - > 100 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates Immobilization EC50: Daphnia magna (Water flea) - 212 mg/l - 48 h
Toxicity to algae Growth inhibition EC50: Pseudokirchneriella subcapitata - > 100 mg/l - 72 h
Toxicity to bacteria Respiration inhibition EC50: activated sludge - > 300 mg/l - 3 h
Bioaccumulative potential: No data available
Mobility in soil: No data available
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with legal requirements.

14. Transport Information

DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated

15. Regulatory Information

USA Regulations:
Comprehensive Environmental Response and Liability Act (CERCLA): This material is not subject to any special reporting under the requirements of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA).
California Prop 65: This product contains no chemical known by the State of California to cause cancer, birth defects or other reproductive harm.

16. Other Information

H319 =Causes serious eye irritation.
Xi =Irritant. R36 = Irritating to eyes.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************