BisHexaMethylene Triamine Penta Methylene Phosphonic Acid, BHMT PMPA Scale Inhibitor Manufacturers, with SDS MSDS Sheet

Supplier, Manufacturer, Exporter of BisHexaMethylene Triamine Penta Methylene Phosphonic Acid or BHMT, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

BHMT PMPA CAS Number 34690-00-1, EINECS EC Number 252-156-6, HS Code ---**; Molecular Weight 685, Molecular Formula: C17H44O15N3P5

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for BHMT PMPA or BisHexaMethylene Triamine Penta Methylene Phosphonic Acid.

For MSDS Sheet Click
MSDS Sheet of BisHexaMethylene Triamine Penta Methylene Phosphonic Acid, BHMT PMPA Manufacturers

Spanish Bis hexametilen triamina penta metileno ácido fosfónico, BHMT PMPA Fabricantes

BisHexaMethylene Triamine Penta Methylene Phosphonic Acid
BHMT PMPA Scale Inhibitor Solution & Pure Suppliers
BHMT PMPA Bis(HexaMethylene Triamine Penta Methylene Phosphonic Acid

In the USA, UAE, Iran Iraq, Kuwait, Saudi Arabia and other oil producing areas, several hundred chemical compounds are used in hydraulic fracturing also called fracking, fracing or frac. In some areas like UK only 'Non-Hazardous' chemicals are permitted for fracturing fluids by the Environment Agency. All chemicals have to be declared publicly and increasingly, food additive based chemicals are available to allow fracking to take place safely.

Mubychem is an internationally preferred source for Stimulation Chemicals and Hydraulic Fracturing Chemicals. We serve various oil and shale gas producing countries like USA UAE, Kuwait, Iran, Iraq, Saudi Arabia, UK, Europe India etc. We are never too far from your well-site with multiple 24/7 company owned or rented warehouses in the India, USA and across the globe. With customers in several countries, we sell almost all the fracturing chemicals.

Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale. Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) has good water soluble properties and heat tolerance. Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C. BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler. It is widely used in Shale Gas Fracturing.

Specification:
Appearance Dark brown liquid
Active component %  43.0-48.0
Chloride (Cl-)%  8.0 max
Fe(as Fe3+)ppm  65 max
density(20C)g/cm3  1.20 min
pH value (1% water solution)  2.0 max

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last : 25 August, 2022

Shale Gas Hydraulic Fracturing Chemicals
Acetic Acid Solution Ammonium Persulfate or Persulphate
Acid Viscosifier Acid Emulsifier
ATMP Phosphonate, Amino tris (methylene phosphonic acid) Ammonium Bifluoride
Barium Sulfate Remover BHMT or BHMTPMPA Biocide Solution
Boron & Zirconium based Guar Cross Linker BME Iron Reducer or Dissolver
Calcium Chloride Anhydrous & Solution Cement Defoamer
Citric Acid Solution Clay Stabilizer
Corrosion Inhibitors DETA Phosphonate or DTPMP Phosphonate
Didecyl Dimethyl Ammonium Chloride Solution Diverting Agent
Encapsulated Citric Acid Encapsulated Gel Breaker
Fe46 Liquid Iron Control Blend Friction Reducer
Flow Back Aid, Water Recovery Surfactant Foam or Finofoam 810
Foam 418 Heavy Crude Foamer Gel Sweep
Glycerin Solution Glutaraldehyde Solution
HP HT Lube Hydroxy ethylidene diphosphonic acid, HEDP phosphonate
Hydrogen Sulfide Scavenger Potassium Chloride
KI (Stabilised) & Initiator KCl Substitute or Potassium Chloride Substitute
Non Emulsifier Paraffin Dispersant
Potassium Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Phthalic Acid, EDTA, BPA based Diverting Agents
Scale Inhibitor Chemicals Sodium Chlorite Solution
Sodium Glutaraldehyde Bisulfite Bisulphite

Extended Release Solids - Scale Paraffin Asphaltene Inhibitor

Tetrakis Hydroxymethyl Phosphonium Sulfate THPS Xanthan Gum Slurry
Zinc Chloride  

Exporter & Importer By Air Exports Exporters & Improters BHMT PMPA Bis(HexaMethylene Triamine Penta Methylene Phosphonic Acid Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

BHMT BHMTPMPA Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid Solution SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 02-Oct-20

1. Product Identification

Product Name & Other Names: BHMT BHMTPMPA Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid Scale Inhibitor aqueous solution.
CAS No.: 34690-00-1
EINECS EC Code: 252-156-6
Molecular Weight: 685
Chemical Formula: C17H44N3O15P5
Relevant uses and uses advised against (if any): Oil & Gas Wells and Industrial Use & Industrial use only.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin Corrosion/Irritation (Category 2), H315
Serious Eye Damage/Irritation (Category 1) H318
Aquatic Toxicity Chronic, (Category 3 ) H412

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard Statements:
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P310: Immediately call a POISON CENTER or doctor/physician.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P302+352 - IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+313: If skin irritation occurs, get medical advice/attention.
P337+313: If eye irritation persists, get medical advice/attention.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to Directive 67/548/EEC or 1999/45/EC:
Hazard Symbols:
C Corrosive
N Dangerous for the environment
Risk Phrases:
R34  Causes burns.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

3. Composition/Information on Ingredients

Product Name & Other Names: BHMT BHMTPMPA Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid Scale Inhibitor aqueous solution.
Percentage: 43-48% in water.
EINECS EC Code: 252-156-6
CAS No.: 34690-00-1

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

5. Fire Fighting Measures

Auto-Ignition Temperature: NA.
Flash Points: NA.
Products of Combustion: Oxides of Carbon, Nitrogen and Phosphorous. Toxic Fumes and phosphine, inorganic acids are expected.
Explosion: Not considered to be an explosion hazard. Slight fire hazard. Dust/air mixtures may ignite or explode.
Fire Extinguishing Media: Regular dry chemical, carbon dioxide, water, and regular foam. For large fires use regular foam or flood with fine water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all-purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool. Do not get water directly on material. Avoid inhalation of material or combustion by-products. Stay upwind and keep out of low areas.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Dispose of according to local and regional authority requirements.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkali. Keep away from ignition sources and naked flame. The reuse of this material's container for non-industrial purposes is prohibited.
Suitable materials of construction: Glass lining, PVC, polypropylene, glass reinforced plastic, and polyethylene.
Unsuitable materials of construction: Mild steel, carbon steel, aluminum, and other metals.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: It is a dark amber colored liquid.
Odor: Characteristic.
Odor threshold: Not available.
pH: less than 2 for 1% solution at 25C (77F)
Relative density: around 1.2
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is soluble in water.
Viscosity: Not available.
Molecular Weight: 685,
Molecular Formula: C17H44O15N3P5

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage. Avoid contact with strong acids, alkali or oxidizing agents and heat.
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and unidentified compounds at elevated temperatures. Phosphine, inorganic acids, oxides of phosphorus are expected
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, alkali, or oxidizing agents. Incompatible with bases, amines, metals, sulfites, reducing agents, oxidizing materials.
Conditions to Avoid: Incompatibles.

11. Toxicological Information

Toxicity to Animals: Not available.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

12. Ecological Information

Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

LAND TRANSPORT (USA DOT) & ADR/RID Europe:
UN number: 3265
Hazard Class: 8
Proper Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. ([[(Phosphonomethyl)imino]bis[hexamethylenenitrilobis(methylene)]]tetrakisphosphonic acid)
Packaging group: III
IATA, ADR/RID Europe & IMDG:
UN number: 3265
Hazard Class: 8
Proper Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. ([[(Phosphonomethyl)imino]bis[hexamethylenenitrilobis(methylene)]]tetrakisphosphonic acid)
Packaging group: III

15. Regulatory Information

USA:
Section 302: Not subject to reporting requirements of SARA Title Ill, Section 302.
Section 311/312: Acute Health. See section 2.
Section 313: None
California Proposition 65: Not listed.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.

Classification according to Directive 67/548/EEC or 1999/45/EC:
Hazard Symbols:
C Corrosive
Risk Phrases:
R34  Causes burns.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.se effects in the aquatic environment

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.