Hydrogenated Soybean Oil Flakes BP USP NF FCC Food Grade Manufacturers, with SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Hydrogenated Soybean Oil Flakes, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself
Search our website here:
Hydrogenated Soybean Oil Flakes: CAS Number: 8016-70-4, EINECS EC Number: 269-820-6, Molecular Formula: yyyyy, Molecular Weight: yyyyy, HS Code 1516 20 99
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Hydrogenated Soybean Oil Flakes.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Hydrogenated Soybean Oil Flakes Manufacturers
Spanish Copos de aceite de soja hidrogenado Fabricantes
We also offer Hydrogenated Palm Oil
Hydrogenated Soybean Oil Flakes
Specifications of Hydrogenated Soybean Oil:
185 – 195
Colour in Gardner Scale
65 ± 3
Lipid Profile(By GC)
Hydrogenated Soyabean Oil BP Ph Eur Grade Specifications
Action and use: Excipient.
Product obtained by refining, bleaching, hydrogenation and deodorisation of oil obtained from seeds of Glycine max (L) Merr. (G. hispida (Moench) Maxim.). The product consists mainly of triglycerides of palmitic and stearic acids.
Appearance: White or almost white mass or powder which melts to a clear, pale yellow liquid when heated.
Solubility: Practically insoluble in water, freely soluble in methylene chloride, in light petroleum (bp: 65-70 °C) after heating and in toluene, very slightly soluble in ethanol (96 per cent)
A. Melting point (see Tests).
B. Composition of fatty acids (see Tests).
Melting point: 66C to 72C.
Acid value: Maximum 0.5.
Peroxide value: Maximum 5.0.
Unsaponifiable matter: Maximum 1.0 per cent, determined on 5.0 g.
Alkaline impurities: Dissolve 2.0 g with gentle heating in a mixture of 1.5 mL of ethanol (96 per cent) R and 3 mL of toluene R. Add 0.05 mL of a 0.4 g/L solution of bromophenol blue R in ethanol (96 per cent) R. Not more than 0.4 mL of 0.01 M hydrochloric acid is required to change the colour to yellow.
Composition of fatty acids:
Composition of the fatty-acid fraction of the oil:
saturated fatty acids of chain length less than C14: maximum 0.1 per cent
myristic acid : maximum 0.5 per cent
palmitic acid : 9.0 per cent to 16.0 per cent
stearic acid : 79.0 per cent to 89.0 per cent
oleic acid and isomers: maximum 4.0 per cent
linoleic acid and isomers: maximum 1.0 per cent
linolenic acid and isomers: maximum 0.2 per cent
arachidic acid: maximum 1.0 per cent
behenic acid: maximum 1.0 per cent.
Nickel: Maximum 1 ppm.
Hydrogenated Soybean Oil USP NF Grade
Hydrogenated Soybean Oil is the product obtained by refining, bleaching, hydrogenation, and deodorization of oil obtained from seeds of the soya plant Glycine max Merr. (Fabaceae). The product consists mainly of triglycerides of palmitic and stearic acids.
Packaging and storage: Preserve in tight, light-resistant containers. No storage requirements specified.
A: It meets the requirements of the test for Fatty acid composition.
B: It meets the requirements of the test for Melting range.
Melting range: between 66 and 72 .
Acid value: Dissolve about 10 g of Hydrogenated Soybean Oil, accurately weighed, in 50 mL of a hot mixture of neutralized alcohol and toluene (1:1), add 0.5 mL of phenolphthalein, and immediately titrate, while still hot, with 0.1 N potassium hydroxide to produce a permanent, faint pink color: the acid value so obtained is not more than 0.5.
Peroxide value: not more than 5.0.
Unsaponifiable matter: not more than 1.0%, determined on 5.0 g.
Fatty acid composition: Hydrogenated Soybean Oil exhibits the following composition profile of fatty acids, as determined in the section Fatty Acid Composition.
No. of Double Bonds
Alkaline impurities: Dissolve by gently heating 2.0 g of Hydrogenated Soybean Oil in a mixture of 1.5 mL of alcohol and 3.0 mL of toluene. Add 0.05 mL of bromophenol blue, and titrate with 0.01 N hydrochloric acid to a yellow end-point: not more than 0.4 mL of 0.01 N hydrochloric acid is required.
Water: not more than 0.3%.
Limit of nickel: To pass the test 1 micro-gm per gm.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We manufacture and supply as under:
Cetomacrogol 1000 or CM 1000
Hydrogenated Castor Oil
Hydrogenated Palm Oil
Hydrogenated Soybean Oil
Light and Heavy Liquid Paraffin, Mineral Oil
Petroleum Jelly or Petrolatum
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
USA, Canada, Mexico and other American
neighbouring buyers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 26 August, 2022
List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Carbonate Ammonium Chloride Ammonium Persulfate Borax; Sodium Borate Boric Acid Calcium Chloride Calcium Saccharate Calcium Sulfate Carbamide Peroxide Chromic Chloride Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Glacial Acetic Acid Lactobionic Acid Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Bromide Potassium Chloride Potassium Hydroxide Pellets Potassium Nitrate Propylene Carbonate Potassium Monopersulfate Selenious acid Sodium Acetate Sodium Bromate Sodium Diacetate Sodium Formaldehyde Bisulfite Sodium Lactobionate Sodium Thiosulfate Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Hydrogenated Soybean Oil Flakes SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 23-Oct-20
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Hydrogenated Soybean Oil Flakes or Soya Wax.
CAS Number: 8016-70-4
EINECS EC Code: 269-820-6
Relevant uses and uses advised against (if any): Industrial Manufacturing
Supplier: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: Hydrogenated Soybean Oil Flakes or Soya Wax.
CAS Number: 8016-70-4
EINECS EC Code: 269-820-6
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.
Section 5: Fire and Explosion Data
Flammability of the Product: Combustible.
Products of Combustion: Fumes and Oxides of carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Water and sand may also be used.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Do not inhale vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Section 7: Handling and Storage
Precautions for safe handling: This material may burn but will not ignite readily. Keep all sources of ignition away from spill/release. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and acids.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
Section 9: Physical and Chemical Properties
Appearance: Solid white to off-white powder, flakes or granules.
Odor threshold: Not available.
pH: Not available.
Relative density: around 0.9
Melting Point: 65-70C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Negligible solubility in water.
Viscosity: Not available.
Section 10: Stability and Reactivity Data
Stability: It is stable.
Conditions of instability: Incompatible materials
Incompatibility with various substances: Heat, light, strong oxidizing agents.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals: LD50 Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Ecotoxicity: The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. Not dangerous for the ozone layer.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods.
Section 15: Other Regulatory Information
USA Federal and State Regulations:Section 16 - Additional Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.