|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Zinc Ammonium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Turkey, Brazil, Chile, Argentina, Dubai etc. |
|
--------
--------
Zinc Ammonium Chloride Manufacturers Galvanizing Flux
For MSDS Sheet Click MSDS of Zinc Ammonium Chloride Galvanizing Flux Manufacturers
Zinc Ammonium Chloride
Powder, Tablets, Blocks, Bricks Pellets
The product is offered as Mono, Double, Triple and Quad Salt
|
Type of Salt |
Minimum Zinc Content |
Ammonium Chloride Number (ACN) |
|
Zinc Ammonium Chloride Mono Salt (ZnCl2.NH4Cl) |
34.3% |
0.39 |
|
Zinc Ammonium Chloride Double Salt (ZnCl2.2NH4Cl) |
26.7% |
0.79 |
|
Zinc Ammonium Chloride Triple Salt (ZnCl2.3NH4Cl) |
21.9% |
1.18 |
|
Zinc Ammonium Chloride Quad Salt (ZnCl2.4NH4Cl) |
18.6% |
1.57 |
Zinc Ammonium
Chloride based
Proprietary Galvanizing
Flux in Powder form
for Wet Flux
applications
( LOW FUMING and
COST EFFECTIVE );
Grade: AMIPM
Packed in 50 Kg HDPE
bags
Zinc Ammonium Chloride
based Proprietary
Galvanizing
Flux
in Powder form for
Dry Flux
applications
( LOW FUMING and FAST
DRYING ); Grade: AMILI
Packed in 50 Kg HDPE
bags
Zinc Ammonium
Chloride based
Proprietary Galvanizing
Flux as
20-25 Baume Liquid
( PIPE GALVANIZING );
Grade: AMILIPI
Packed in 200 Kg HDPE
Barrels
AMIPM is a proprietary Galvanizing Flux based on Zinc Ammonium Chloride. It is LOW COST formulation for reduced fuming and typically used for continuous galvanizing lines (or new flux charge in a batch process). AMIPM is the preferred multi-component, cost-effective formulation. Zinc Ammonium Chloride based Proprietary Galvanizing Flux is extensively used in continuous sheet galvanizing lines as it contains special additives that offer high luster to galvanized products without the typical Sulphide smell that other high luster fluxes bear. Our Galvanizing Flux optimum melting point cleans the sheet before it enters the zinc bath, ensuring strong and uniform adhesion.
AMILI Zinc Ammonium Chloride Galvanizing Flux is formulated for high speed, low fuming, negligible ash and most importantly thin, strong and uniform Zinc coats. Use of our proprietary additives ensures that the flux dries to a simple film, which protects and seals the fluxed steel. Due to the improved fluxing action and a thinner lighter film, the flux dries up faster. The dryer the article to be galvanized is, the quieter it enters the kettle, hence less zinc is splattered about.
The uniform film that is formed over the article to be galvanized due to our special additives, acts as a protective layer over the Iron, ensures that less iron is introduced into the kettle, reducing dross formation.Zinc Ammonium Chloride Manufacturers
Galvanizing Flux Manufacturers
at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright
and Usual
Disclaimer
is Applicable.
Last updated:
21 March, 2012.
----------------
Global or International Zinc Ammonium Chloride & Galvanizing Flux Suppliers, Exporters, Importers, Manufacturers
Exporters to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Argentina Chile Dubai etc.
----------------