Aluminum hydroxide n Dried aluminum hydroxide gel n Aluminum oxide Pure n BP Ph Eur USP Grade Manufacturers, SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Aluminum hydroxide n Dried aluminum hydroxide gel & Aluminum oxide, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself
Search our website here:
Aluminium hydroxide or Aluminum hydroxide: CAS Number: 21645-51-2, EINECS EC Number: 244-492-7, Molecular Formula: Al(OH)3, Molecular Weight: 78, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for Aluminium hydroxide or Aluminum hydroxide.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Aluminum hydroxide Manufacturers
Dried Aluminium hydroxide gel Pure Suppliers
Aluminium hydroxide or Aluminum hydroxide is used to formulate antacid. Aluminium hydroxide, Al(OH)3, archaically called hydrate of alumina or alumina trihydrate (Al2O3·3H2O), is found in nature as the mineral gibbsite. This chemical acts as a suitable catalyst carrier. It does not dissolve in water. Aluminum hydroxide is used to treat symptoms of increased stomach acid, such as heartburn, upset stomach, sour stomach, or acid indigestion. This is used as an antacid in humans and animals. It is also used to reduce phosphate levels in people with certain kidney conditions. Aluminum Hydroxide serves as a suitable filler material for artificial marble items and as flame proof material used for processing rubber and plastic. Aluminum Hydroxide and Magnesium Hydroxide are antacids used together to relieve heartburn, acid indigestion, and upset stomach. They may be used to treat these symptoms in patients with peptic ulcer, gastritis, esophagitis, hiatal hernia, or too much acid in the stomach. They combine with stomach acid and neutralize it.
General Specifications of Aluminium hydroxide or Aluminum hydroxide:
Appearance: White crystal or powder.
Assay as Al(OH)3: 99.4% minimum.
SiO2: 0.02% maximum.
Na2O: 0.3% maximum.
Fe2O3: 0.02% maximum.
Loss on ignition: 34.5 ± 0.5%
pH: 8.0 - 10.0
Electrical conductivity: 150 us/cm maximum.
Moisture: 0.3% maximum.
Whiteness: 96% minimum.
D50: 1.3 - 2.1 μm
Oil absorption (linseed oil): 50 mL/100g maximum.
Na2O (soluble): 0.03% maximum.
Specific surface area: 3 - 6 m2/g
Relative density: 2.4
Sieve analysis (% on 325 mesh): 0.1% maximum.
Aluminum Hydroxide Gel USP Grade:
Al(OH)3 --- 78.00 --- [21645-51-2].
Aluminum Hydroxide Gel is a suspension of amorphous aluminum hydroxide in which there is a partial substitution of carbonate for hydroxide. It contains the equivalent of not less than 90.0 percent and not more than 110.0 percent of the labeled amount of aluminum hydroxide [Al(OH)3]. It may contain Peppermint Oil, Glycerin, Sorbitol, Sucrose, Saccharin, or other suitable flavors, and it may contain suitable antimicrobial agents.
Packaging and storage: Preserve in tight containers, and avoid freezing.
A: Place about 1 g in a flask equipped with a stopper and glass tubing, the tip of which is immersed in calcium hydroxide in a test tube. Add 5 mL of 3 N hydrochloric acid to the flask, and immediately insert the stopper: gas evolves in the flask and a precipitate is formed in the test tube.
B: The solution remaining in the flask responds to the tests for Aluminum.
Microbial limits: Its total aerobic microbial count does not exceed 100 cfu per mL, and it meets the requirements of the test for the absence of Escherichia coli.
Acid-neutralizing capacity: Not less than 65.0% of the expected mEq value, calculated from the results of the Assay, is obtained. Each mg of Al(OH)3 has an expected acid-neutralizing capacity value of 0.0385 mEq.
pH: between 5.5 and 8.0, determined potentiometrically.
Chloride: Transfer an accurately measured quantity of the Gel, equivalent to 0.6 g of Al(OH)3, to a porcelain dish. Add 0.1 mL of potassium chromate and 25 mL of water. Stir, and add 0.10 N silver nitrate until a faint, persistent pink color is obtained: not more than 8.0 mL of 0.10 N silver nitrate is required [4.7%, based on the Al(OH)3 content].
Sulfate: Add 5.0 mL of 3 N hydrochloric acid to an accurately measured quantity of the Gel, equivalent to 0.3 g of Al(OH)3, and heat to dissolve the specimen under test. Cool, dilute with water to 250 mL, and filter if necessary: a 20-mL portion of the filtrate shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid [0.8%, based on the Al(OH)3 content].
Arsenic: --- The limit is 0.001%, based on the Al(OH)3 content.
Heavy metals: Dissolve an accurately measured quantity of the Gel, equivalent to 0.24 g of Al(OH)3, in 10 mL of 3 N hydrochloric acid with the aid of heat, filter, if necessary, and dilute with water to 25 mL: the limit is 0.0083%, based on the Al(OH)3 content.
Dried Aluminium Hydroxide BP Ph Eur Grade:
Hydrated Aluminium Oxide, Ph. Eur.
Action and use: Antacid.
Content: 47.0 per cent to 60.0 per cent of Al2O3.
Appearance: White or almost white, amorphous powder.
Solubility: Practically insoluble in water. It dissolves in dilute mineral acids and in solutions of alkali hydroxides.
Solution S (see Tests) gives the reaction of aluminium.
Solution S: Dissolve 2.5 g in 15 mL of hydrochloric acid, heating on a water-bath. Dilute to 100 mL with distilled water.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
Alkaline impurities: Shake 1.0 g with 20 mL of carbon dioxide-free water for 1 min and filter. To 10 mL of the filtrate add 0.1 mL of phenolphthalein solution. Any pink colour disappears on the addition of 0.3 mL of 0.1 M hydrochloric acid.
Neutralising capacity: Carry out the test at 37C. Disperse 0.5 g in 100 mL of water, heat, add 100.0 mL of 0.1 M hydrochloric acid, previously heated, and stir continuously; the pH of the solution after 10 min, 15 min and 20 min is not less than 1.8, 2.3 and 3.0 respectively and is at no time greater than 4.5. Add 10.0 mL of0.5 M hydrochloric acid, previously heated, stir continuously for 1 h and titrate with 0.1 M sodium hydroxide to pH 3.5; not more than 35.0 mL of 0.1 M sodium hydroxide is required.
Chlorides: Maximum 1 per cent.
Sulfates: Maximum 1 per cent.
Arsenic: Maximum 4 ppm, determined on 10 mL of solution S.
TAMC: acceptance criterion 103 CFU/g.
TYMC: acceptance criterion 102 CFU/g.
Absence of bile-tolerant gram-negative bacteria.
Absence of Escherichia coli.
Dissolve 0.800 g in 10 mL of hydrochloric acid, heating on a water-bath. Cool and dilute to 50.0 mL with water. To 10.0 mL of the solution add dilute ammonia until a precipitate begins to appear. Add the smallest quantity of dilute hydrochloric acid needed to dissolve the precipitate and dilute to 20 mL with water. Carry out the complexometric titration of aluminium.
1 mL of 0.1 M sodium edetate is equivalent to 5.098 mg of Al2O3.
In an airtight container, at a temperature not exceeding 30C.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Aluminum oxide: CAS Number: 1344-28-1, EINECS EC Number: 215-691-6, Molecular Formula: Al2O3, Molecular Weight: 101.96, HS Code ---**
Aluminium oxide or Aluminum oxide is also known as Alumina. It is a chemical compound of aluminium and oxygen with the chemical formula Al2O3. It is the most commonly occurring of several aluminium oxides, and specifically identified as aluminium(III) oxide. Being fairly chemically inert and white, aluminium oxide is a used as filler for plastics. Aluminium oxide is a common ingredient in sunscreen and is sometimes also used in cosmetics such as blush, lipstick, and nail polish. The compound is used in production of industrial ceramics.
We manufacture and supply as under:
Activated Alumina Aluminum Oxide
Aluminum Chloride Hexahydrate
Aluminum Chloride Anhydrous & Hexahydrate
Aluminium Potassium Sulphate
Aluminium Magnesium Silicate
Dihydroxyaluminum Sodium Carbonate
Dried Aluminium Phosphate
SDS MSDS Sheet of Aluminum oxide Manufacturers
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
USA, Canada, Mexico and other American
neighbouring buyers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 1 July, 2023
List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Carbonate Ammonium Chloride Ammonium Persulfate Borax; Sodium Borate Boric Acid Calcium Chloride Calcium Saccharate Calcium Sulfate Carbamide Peroxide Chromic Chloride Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Glacial Acetic Acid Lactobionic Acid Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Bromide Potassium Chloride Potassium Hydroxide Pellets Potassium Nitrate Propylene Carbonate Potassium Monopersulfate Selenious acid Sodium Acetate Sodium Bromate Sodium Diacetate Sodium Formaldehyde Bisulfite Sodium Lactobionate Sodium Thiosulfate Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Aluminium Hydroxide or Aluminum Hydroxide or Dried Aluminium Hydroxide Gel SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Aluminium hydroxide or Aluminum hydroxide or Dried Aluminium hydroxide gel.
CAS Number: 21645-51-2
EINECS EC Code: 244-492-7
Chemical Formula: Al(OH)3
Molecular Weight: 78
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Section 3: Composition and Information on Ingredients
Product Name/Synonyms: Aluminium hydroxide or Aluminum hydroxide or Dried Aluminium hydroxide gel.
CAS Number: 21645-51-2
EINECS EC Code: 244-492-7
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Aluminum oxide.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Do not inhale vapors, dust, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids.
Section 8: Exposure Controls/Personal Protection
Control Parameters: Contains no substances with occupational exposure limit values.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants low.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self-contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be enough; consult a specialist BEFORE handling this product.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid White crystal or powder.
Odor threshold: Not available.
pH: Not available.
Relative density: 2.4
Melting Point: 300C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in cold water.
Viscosity: Not available.
Chemical Formula: Al(OH)3
Molecular Weight: 78
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, air contact, moisture, direct sunlight.
Incompatibility with various substances: Strong oxidizing agents. Keep away from oxidizing agents and from highly alkaline or acidic materials to prevent exothermic reactions.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals: LD50/oral/rat = > 2000 mg/kg Oral LD50 Rat.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Reproductive Effects: No information available
Developmental Effects: No information available
Germ cell mutagenicity: Not conclusive data for classification.
Section 12: Ecological Information
Toxicity to fish: semi-static test NOEC - Salmo trutta - > 0.07 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test NOEC - Daphnia magna (Water flea) - > 0.005 mg/l - 48h.
Products of Biodegradation: Not available
Bioaccumulative potential: Not available
Mobility in soil: Not available
Results of PBT and vPvB assessment: Not available.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.
Section 14: Transport Information
DOT (USA): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID Europe: Not dangerous goods.
Section 15: Other Regulatory Information
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 302 Extremely Hazardous Substances and TPQs: None
Section 313 Chemical Category: None.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.