High fructose corn syrup HFCS or isoglucose Manufacturers, with SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Glutaraldehyde, High fructose corn syrup HFCS or Isoglucose, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself
Search our website here:
High fructose corn syrup HFCS or Isoglucose: CAS Number: 977042-84-4, EINECS EC Number: 200-333-3, Molecular Formula: yy, Molecular Weight: yy, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for High fructose corn syrup HFCS or Isoglucose.
For SDS MSDS Sheet Click
SDS MSDS Sheet of High fructose corn syrup HFCS or Isoglucose Manufacturers
High fructose corn syrup
HFCS or Isoglucose Pure Suppliers
High fructose corn syrup (HFCS), also known as glucose-fructose, isoglucose and glucose-fructose syrup is a sweetener made from corn starch. The United States Food and Drug Administration states that HFCS is a safe ingredient for food and beverage manufacturing. High-fructose corn syrup is a common sweetener in sodas and fruit-flavored drinks.
Specifications of High Fructose Corn Syrup USP NF Grade:
High Fructose Corn Syrup is a clear aqueous solution of saccharides prepared from high-dextrose-equivalent corn starch hydrolysate by the partial enzymatic conversion of dextrose to fructose, using an insoluble glucose isomerase enzyme preparation that complies with 21 CFR 184.1372. It is available in two types, 42% and 55%, based on fructose as a proportion of total saccharides. High Fructose Corn Syrup 42% contains NLT 97.0% of total saccharides, expressed as a percentage of total solids, of which NLT 92.0% consists of monosaccharides, including 41.0%–50.0% of fructose, and NMT 8.0% consists of other saccharides. High Fructose Corn Syrup 55% contains NLT 95.0% of total saccharides, expressed as a percentage of total solids, of which NLT 94.0% consists of monosaccharides, including 54.0%–60.0% of fructose, and NMT 6.0% consists of other saccharides.
Analysis: Add a few drops of a solution (1 in 10) of Syrup to 5 mL of hot, alkaline cupric tartrate.
Acceptance criteria: A copious, red precipitate of cuprous oxide is formed (distinction from sucrose).
B. It meets the requirements of the Assay.
To pass the Chromatographic test.
For High Fructose Corn Syrup 42%:
Total saccharides: NLT 97.0%, expressed as a percentage of total solids. Total saccharides contain monosaccharides and other saccharides as follows.
Monosaccharides: NLT 92.0%
Other saccharides: NMT 8.0%
For High Fructose Corn Syrup 55%:
Total saccharides: NLT 95.0%, expressed as a percentage of total solids. Total saccharides contain monosaccharides and other saccharides as follows.
Monosaccharides: NLT 94.0%
Other saccharides: NMT 6.0%
Residue on Ignition: NMT 0.05%
Limit of Lead:
To pass the test
Acceptance criteria: NMT 0.1 micro-g/g
Limit of Sulfur Dioxide:
To pass the test
Acceptance criteria: NMT 30 µg/g
Microbial Enumeration Tests and Tests for Specified Microorganisms: The total aerobic microbial count does not exceed 103 cfu/g, and the total combined molds and yeasts count does not exceed 100 cfu/g.
High Fructose Corn Syrup 42%: NLT 70.5%
High Fructose Corn Syrup 55%: NLT 76.5%
Packaging and Storage: Preserve in tight containers. No storage requirement specified.
Labeling: Label it to state, as part of the official title, the nominal percentage of fructose. Label it to indicate the presence of sulfur dioxide if the residual concentration is greater than 10 micro-g/g.
Specifications of High-Fructose Corn Syrup FCC Food Grade:
High-Fructose Corn Syrup (HFCS) occurs as a water white to light yellow, somewhat viscous liquid that darkens at high temperatures. It is a saccharide mixture prepared as a clear, aqueous solution from high-dextrose-equivalent corn starch hydrolysate by the partial enzymatic conversion of glucose (dextrose) to fructose, using an insoluble glucose isomerase preparation that complies with 21 CFR 184.1372 and that has been obtained from a pure culture fermentation that produces no antibiotics. It is miscible in all proportions with water.
Function: Nutritive sweetener.
Labeling: Indicate the color range and presence of sulfur dioxide if the residual concentration is greater than 10 mg/kg.
Identification: Add a few drops of a 1:10 aqueous solution to 5 mL of hot alkaline cupric tartrate. A copious red precipitate of cuprous oxide forms.
Assay: 42% HFCS: Not less than 97.0% total saccharides, expressed as a percentage of solids, of which not less than 42.0% consists of fructose, not less than 92.0% consists of monosaccharides, and not more than 8.0% consists of other saccharides. 55% HFCS: Not less than 95.0% total saccharides, expressed as a percentage of solids, of which not less than 55.0% consists of fructose, not less than 95.0% consists of monosaccharides, and not more than 5.0% consists of other saccharides.
Arsenic: Not more than 1 mg/kg.
Color: Within the range specified by the vendor.
Lead: Not more than 0.1 mg/kg.
Residue on Ignition: Not more than 0.05%.
Sulfur Dioxide: Not more than 0.003%.
Total Solids: 42% HFCS: Not less than 70.5%; 55% HFCS: Not less than 76.5%.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We manufacture and supply as under:
Corn Syrup Solids and Corn Syrup
High Fructose Corn Syrup HFCS
Lactose Monohydrate n Anhydrous and Directly Compressible Lactose
Liquid Glucose SO2 Free
Maltitol & Maltitol Liquid Solution
Maltose Monohydrate n Anhydrous
D-Mannose or Mannose
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
USA, Canada, Mexico and other American
neighbouring buyers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 26 August, 2022
List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Carbonate Ammonium Chloride Ammonium Persulfate Borax; Sodium Borate Boric Acid Calcium Chloride Calcium Saccharate Calcium Sulfate Carbamide Peroxide Chromic Chloride Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Glacial Acetic Acid Lactobionic Acid Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Bromide Potassium Chloride Potassium Hydroxide Pellets Potassium Nitrate Propylene Carbonate Potassium Monopersulfate Selenious acid Sodium Acetate Sodium Bromate Sodium Diacetate Sodium Formaldehyde Bisulfite Sodium Lactobionate Sodium Thiosulfate Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
High fructose corn syrup HFCS or Isoglucose SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 22-Oct-20
Section 1: Chemical Product and Company Identification
Product Name & Other Names: High fructose corn syrup HFCS or Isoglucose.
CAS Number: 977042-84-4
EINECS EC Code: 200-333-3
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling Regulation as per GHS & EC 1272/2008 (CLP) & GHS
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: High fructose corn syrup HFCS or Isoglucose.
CAS Number: 977042-84-4
EINECS EC Code: 200-333-3
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Products of Combustion: Fumes and oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Contain spilled material. Do not inhale vapors, mist, or gas. Avoid dust formation. Cover with inert absorbent material and use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents.
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
Section 9: Physical and Chemical Properties
Physical state and appearance: white to light yellow viscous liquid with a sweet taste.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, Moisture
Incompatibility with various substances: Avoid high temperatures, sparks, open flames and moisture. Avoid contact with strong oxidizing agents and acids.
Polymerization: Will not occur.
Section 11: Toxicological Information
LD50 Oral - Rat: No data available.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Reproductive toxicity: No data available.
Teratogenicity: No data available.
Developmental Effects: No data available.
Section 12: Ecological Information
Toxicity to fish: No data available.
BOD5 and COD: Not available.
Mobility: Will likely be mobile in the environment due to its water solubility.
Persistence and Degradability: No information available. However unlikely to persist.
Bioaccumulation/ Accumulation: No information available. However unlikely to accumulate.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Section 15: Other Regulatory Information
USA Regulations:Section 16 - Additional Information
SARA 313: Not applicable
SARA 311/312 Hazard Categories: Not applicable
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.