Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Ethyl acrylate or Ethyl propenoate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester: CAS Number: 140-88-5, EINECS EC Number: 205-438-8, Molecular Formula: C5H8O2 or CH2CHCO2CH2CH3, Molecular Weight: 100.12, HS Code 2916 12 00

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester Manufacturers

Ethyl acrylate
Ethyl propenoate or Acrylic acid ethyl ester Pure Suppliers
Ethyl acrylate

Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester is an organic compound with the formula CH2CHCO2CH2CH3. It is the ethyl ester of acrylic acid. It is a colorless liquid with a characteristic acrid odor. It is used in paints, textiles, and non-woven fibers. It is also a reagent in the synthesis of various pharmaceutical intermediates.

General Properties and Specifications of Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester:
Appearance: Clear colorless liquid.
Odor: Acrid odor.
Assay: 99.5% minimum.
Water: 0.05 maximum.
Relative density: about 0.92
Melting point: -71C literature.
Boiling point: 99C literature.
Flash point: 9C literature.
Auto-ignition temperature: 345C.
Solubility: Slightly soluble in water. Slightly soluble in dimethyl sulfoxide; soluble in chloroform; miscible in ethanol, ethyl ether.
MEHQ as Inhibitor :10 - 20 ppm.
Storage Refrigerated.
Hazardous polymerization may occur. Polymerization may be caused by elevated temperature, oxidizers, peroxides.

We also manufacture and supply as under:

Acrylic Acid

Acrylamide

Acrylonitrile

n-Butyl Methacrylate

Ethyl Acrylate

2 Ethylhexyl Acrylate

2-Hydroxyethyl Methacrylate

Methyl Acrylate

Methacrylic Acid

Methyl Methacrylate

Sodium Polyacrylate.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 23 October, 2023

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Ethyl acrylate manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
08-Mar-21

1. Product Identification

Product Name & Other Names: Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester.
CAS No.: 140-88-5
EINECS EC No.: 205-438-8
Molecular Formula: C5H8O2 or CH2CHCO2CH2CH3
Molecular Weight: 100.12
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
:

Flammable liquids (Category 2) H225
Acute toxicity, Oral (Category 4) H302
Acute toxicity, Dermal (Category 4), H312
Skin sensitization (Category 1), H317
Skin irritation (Category 2), H315 Eye irritation (Category 2), H319
Acute toxicity, Inhalation (Category 3) H331
Specific target organ toxicity - single exposure (Category 3) Respiratory system, H335
Long-term (chronic) aquatic hazard (Category 3), H412

Labeling according to Regulation (EC) No 1272/2008

GHS Label Elements
Toxic
Toxic

GHS Label Elements
Flammable
Flammable

Signal Words: Danger

Hazard statements:
H225: Highly flammable liquid and vapor.
H302 + H312: Harmful if swallowed or in contact with skin.
H317: May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H331: Toxic if inhaled.
H335: May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/light/…/equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P302+352: IF ON SKIN: Wash with soap and water.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P370+378: In case of fire: Use water spray or fog for extinction.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbols:
F = Flammable.
T = Toxic.
Xi = Irritant.
R-phrases:
R 10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R23 Toxic by inhalation.
R43 May cause sensitization by skin contact.
R36 Irritating to eyes.
R37 Irritating to respiratory system.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

2. Composition/Information on Ingredients

Product Name & Other Names: Ethyl acrylate or Ethyl propenoate or Acrylic acid ethyl ester.
CAS No.: 140-88-5
EINECS EC No.: 205-438-8

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Treat symptomatically.

5. Fire Fighting Measures

Flammability of the Product: Flammable.
Auto-Ignition Temperature: 345C.
Flash Points: 9C
Products of Combustion: Carbon dioxide, carbon monoxide and fumes.
Explosion: Explosive in presence of heat.
Fire Extinguishing Media: Use water spray, dry powder, alcohol resistant foam, carbon dioxide. Flammable liquid and vapor. Do not use a solid (straight) water stream as it may scatter and spread fire. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas. Cool containing vessels with water spray to prevent pressure build-up, auto-ignition, or explosion.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental  precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Avoid mist formation. Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Remove all sources of ignition. Provide proper ventilation. Absorb the material on a porous, inert material such as earth, sand, or vermiculite. Carefully sweep up or swab the material without causing dust/mist. Dispose of in accordance with local regulations.
Large liquid spillages should be contained by use of sand or another inert material. The spillage should be transferred to a suitable container and recovered or disposed of in accordance with local regulations.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Do not ingest. Do not breathe dust vapors or mist . Work under hood. Ensure proper ventilation. Provide appropriate exhaust ventilation at places where dust/mist is formed. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, peroxides. Storage: Refrigerated.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
USA ACGIH TLV (TWA): 5 ppm.
USA ACGIH TLV (STEL): 15 ppm.
USA OSHA PEL (TWA): 25 ppm (skin).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colorless liquid.
Odor: Acrid odor.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.92
Boiling Point: 99C literature.
Melting Point: -71C literature.
Flash Point: 9C
Auto-ignition Temperature: 345C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Slightly soluble in water. Slightly soluble in dimethyl sulfoxide; soluble in chloroform; miscible in ethanol, ethyl ether.
Viscosity: Not available.
Molecular Formula: C5H8O2 or CH2CHCO2CH2CH3
Molecular Weight: 100.12

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. Vapors may form explosive mixture with air. Violent to explosive reaction with polymerization initiators, strong oxidizing agents, reducing agents, peroxides, activated charcoal.
Hazardous Decomposition Products: It emits Carbon dioxide, Carbon monoxide and fumes.
Hazardous Polymerization: Hazardous polymerization may occur. Polymerization may be caused by elevated temperature, oxidizers, peroxides.
Incompatibilities: Oxidizing agents, peroxides.
Conditions to Avoid: Exposure to moisture Exposure to air. Heat, flames, and sparks. Extremes of temperature and direct sunlight. Avoid moisture and air contact.

11. Toxicological Information

Toxicity data
LD Oral - Rat - 550 mg/kg.
LC50 Inhalation – Rat: 5.9 mg/l 4 h.
LD50 Dermal - Rabbit - 1,800 mg/kg.
Carcinogenicity: Not a carcinogen as per IARC, ACGIH, OSHA and NTP.
Epidemiology: No information found.
Teratogenicity: No information found.
Reproductive Effects: No information found.
Mutagenicity: No information found.
Neurotoxicity: No information found.

12. Ecological Information

Toxicity to fish: flow-through test LC50 - Oncorhynchus mykiss (rainbow trout) - 4,6 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: flow-through test EC50 - Daphnia magna (Water flea) - 7,9 mg/l - 48 h.
Persistence and Degradability: Expected to be degradable.
Mobility: Expected to be mobile due to water solubility.
Bioaccumulation/ Accumulation: Not likely to accumulate.
Results of PBT and vPvB assessment: Not available.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe:
UN Number: UN 1917, Hazard Class: 3, Packing Group: II
Shipping Name: ETHYL ACRYLATE, STABILIZED.
IATA/ICAO & IMDG/IMP
UN Number: UN 1917, Hazard Class: 3, Packing Group: II
Shipping Name: ETHYL ACRYLATE, STABILIZED.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: Fire Hazard, Acute Health Hazard, Chronic Health Hazard. See section 2.
California prop. 65: Contains chemical subject to California Prop 65.

16. Other Information

European Labeling in Accordance with EC Directives:
H225: Highly flammable liquid and vapor.
H302 + H312: Harmful if swallowed or in contact with skin.
H317: May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H331: Toxic if inhaled.
H335: May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbols:
F = Flammable.
T = Toxic.
Xi = Irritant.
R-phrases:
R 10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R23 Toxic by inhalation.
R43 May cause sensitization by skin contact.
R36 Irritating to eyes.
R37 Irritating to respiratory system.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************