Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Aluminium Magnesium Silicate BP Grade Manufacturers, SDS GHS MSDS Sheet
Aluminium Magnesium Silicate BP Grade: CAS Number: 12511-31-8 or 12174-11-7, EINECS EC Number: 215-478-8 or 308-996-1, Molecular Formula: --, Molecular Weight: --, HS Code ---**
For SDS MSDS Sheet Click
SDS MSDS Sheet of Aluminium Magnesium Silicate BP Grade Manufacturers
Aluminium Magnesium Silicate
Aluminium Magnesium Silicate BP Grade
Action and use: Excipient.
Mixture of particles with colloidal particle size of montmorillonite and saponite, free from grit and non-swellable ore.
aluminium (Al; Ar 26.98): 95.0 per cent to 105.0 per cent of the value stated on the label.
magnesium (Mg; Ar 24.30): 95.0 per cent to 105.0 per cent of the value stated on the label.
Appearance: Almost white powder, granules or plates.
Solubility: Practically insoluble in water and in organic solvents. It swells in water to produce a colloidal dispersion.
A. Fuse 1 g with 2 g of anhydrous sodium carbonate. Warm the residue with water and filter. Acidify the filtrate with hydrochloric acid and evaporate to dryness on a water-bath. 0.25 g of the residue gives the reaction of silicates.
B. Dissolve the remainder of the residue obtained in identification test A in a mixture of 5 mL of dilute hydrochloric acid and 10 mL of water. Filter and add ammonium chloride buffer solution pH 10.0. A white, gelatinous precipitate is formed. Centrifuge and keep the supernatant for identification C. Dissolve the remaining precipitate in dilute hydrochloric acid. The solution gives the reaction of aluminium.
C. The supernatant liquid obtained after centrifugation in identification test B gives the reaction of magnesium.
pH: 9.0 to 10.0.
Disperse 5.0 g in 100 mL of carbon dioxide-free water.
Arsenic: Maximum 3 ppm.
Transfer 16.6 g to a 250 mL beaker containing 100 mL of dilute hydrochloric acid. Mix, cover with a watch glass and boil gently, with occasional stirring, for 15 min. Allow the insoluble matter to settle and decant the supernatant liquid through a rapid- flow filter paper into a 250 mL volumetric flask, retaining as much sediment as possible in the beaker. To the residue in the beaker add 25 mL of hot dilute hydrochloric acid, stir, heat to boiling, allow the insoluble matter to settle and decant the supernatant liquid through the filter into the volumetric flask. Repeat the extraction with 4 additional quantities, each of 25 mL, of hot dilute hydrochloric acid, decanting each supernatant liquid through the filter into the volumetric flask. At the last extraction, transfer as much of the insoluble matter as possible onto the filter. Allow the combined filtrates to cool to room temperature and dilute to 250.0 mL with dilute hydrochloric acid. Dilute 5.0 mL of this solution to 25.0 mL with dilute hydrochloric acid.
Lead: Maximum 15 ppm.
Loss on drying: Maximum 8.0 per cent, determined on 1.000 g by drying in an oven at 105C.
TAMC: acceptance criterion 1000 CFU/g.
TYMC: acceptance criterion 100 CFU/g.
Absence of Escherichia coli.
The label states the content of aluminium and magnesium.
We also offer Magnesium Aluminium Silicate USP NF Grade
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 11 April, 2018
List of All the IP BP USP FCC ACS Grades of Chemicals Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Bromide Ammonium Carbonate Ammonium Chloride Benzyl Alcohol Benzoic Acid Bismuth Citrate Bismuth Subcarbonate Borax; Sodium Borate Boric Acid Calcium Acetate Calcium Carbonate Calcium Chloride Calcium Hydroxide Calcium Levulinate Calcium Oxide Calcium Saccharate Calcium Sulfate Carbamide Peroxide Carmellose Carmellose Calcium Carmellose Sodium Chromic Chloride Citric Acid Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Gentian Violet Glacial acetic Acid Magnesium Chloride Hexa & Anhydrous Magnesium Oxide Magnesium Stearate Magnesium Sulfate Hepta & Anhydrous Maleic Acid Malic Acid BP USP Manganese Chloride Manganese Sulfate Methylene Blue Oleic Acid Potash Alum Potassium Bitartrate, Cream of Tartar Potassium Bromide Potassium Carbonate Potassium Chloride Potassium Hydroxide Pellets Potassium Iodide Potassium Nitrate Propionic Acid Propylene Carbonate Selenious acid Sodium Acetate Sodium Bicarbonate Sodium Butyrate Sodium Carbonate Sodium Feredetate Sodium Fluoride Sodium Hydroxide Pellets Sodium Molybdate Sodium Perborate Sodium Propionate Sodium Selenite Pentahydrate Sodium Sulfate Sodium Tartrate Dihydrate Sodium Thiosulfate Stannous Chloride Dihydrate Stannous Fluoride Tartaric Acid Urea Zinc Carbonate Zinc Chloride Hot Items Ammonium Chloride Ammonium Persulfate Alpha Olefin Sulphonate Butylated Hydroxy Anisole Calcium Butyrate Calcium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Copper Chloride Copper Sulfate Sulphate D-Glucuronolactone Hydrazine Hydrate DC Directly Compressible Calcium Carbonate Encapsulated Citric Acid Encapsulated Fumaric Acid Encapsulated Sodium Bicarbonate Isatoic Anhydride Magnesium Butyrate Octyldodecanol Picric Acid Sodium Acetate Sodium Bisulphate Skatole; 3-methylindole Sodium Diacetate Sodium Formaldehyde Bisulfite Zinc Chloride Zinc Sulphate
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Aluminum Magnesium Silicate SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product Name: Aluminum Magnesium Silicate.
CAS Number: 12511-31-8 or 12174-11-7
EINECS EC Code: 215-478-8 or 308-996-1
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Section 3: Composition and Information on Ingredients
Product Name: Magnesium Aluminum Silicate.
CAS Number: 12511-31-8 or 12174-11-7
EINECS EC Code: 215-478-8 or 308-996-1
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Aluminum oxide, Magnesium oxide, Silicon oxides.
Fire Fighting Media and Instructions: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Do not inhale vapors, dust, mist or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV with local authorities.
Section 7: Handling and Storage
Precautions: Do not breathe dust. Keep away from incompatibles such as oxidizing agents, acids.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid white to off-white powder or granules.
Specific Gravity: 2.6 approximate.
pH (5% soln/water): Not available.
Boiling Point: Not available.
Melting Point: Not available.
Solubility: Insoluble in cold water.
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials
Incompatibility with various substances: Strong oxidizing agents.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals: LD50/oral/rat = > 16000 mg/kg Oral LD50 Rat.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Reproductive Effects: No information available
Developmental Effects: No information available
Section 12: Ecological Information
Ecotoxicity: No specific data or information available regarding environmental impact.
Products of Biodegradation: The product itself and its products of degradation are slightly toxic.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID: Not dangerous goods
Section 15: Other Regulatory Information
USA Federal and State Regulations:
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 302 Extremely Hazardous Substances and TPQs: None
Section 313 Chemical Category: None
Section 16 - Additional InformationDisclaimer:
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.