Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Aluminium Chlorohydrate USP Grade Manufacturers, SDS GHS MSDS Sheet
Aluminium chlorohydrate: CAS Number: 1327-41-9, EINECS EC Number: 215-477-2, Molecular Formula: AlnCl(3n-m)(OH)m, Molecular Weight: yyyyy, HS Code ---**
For SDS MSDS Sheet Click
SDS MSDS Sheet of Aluminium chlorohydrate Manufacturers
Pure USP Grade
Aluminium chlorohydrate is an aluminium salts having the general formula AlnClAlnCl(3n-m)(OH)m. It is used in cosmetics as an antiperspirant and as a coagulant in water purification.
In water purification, this compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminium salts. Further, the high degree of neutralization of the HCl results in minimal impact on treated water pH when compared to other aluminium and iron salts.
Specifications of Aluminium chlorohydrate solution:
Appearance: Clear to yellowish hazy liquid.
Specific Gravity: 1.33 to 1.35
pH of 30% (w/w): 3.5 to 4.5
Aluminum (Al): 12.2 to 12.7%
Aluminium as (Al2O3): 23 to 24%
Chloride (Cl): 7.9 to 8.4%
Iron (Fe): 300ppm maximum
Arsenic (As2O3): 2ppm maximum
Lead (Pb): 10ppm maximum
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 19 August, 2017
List of All the IP BP USP FCC ACS Grades of Chemicals Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Bromide Ammonium Carbonate Ammonium Chloride Benzyl Alcohol Benzoic Acid Bismuth Citrate Bismuth Subcarbonate Borax; Sodium Borate Boric Acid Calcium Acetate Calcium Carbonate Calcium Chloride Calcium Hydroxide Calcium Levulinate Calcium Oxide Calcium Saccharate Calcium Sulfate Carbamide Peroxide Carmellose Carmellose Calcium Carmellose Sodium Chromic Chloride Citric Acid Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Gentian Violet Glacial acetic Acid Magnesium Chloride Hexa & Anhydrous Magnesium Oxide Magnesium Stearate Magnesium Sulfate Hepta & Anhydrous Maleic Acid Malic Acid BP USP Manganese Chloride Manganese Sulfate Methylene Blue Oleic Acid Potash Alum Potassium Bitartrate, Cream of Tartar Potassium Bromide Potassium Carbonate Potassium Chloride Potassium Hydroxide Pellets Potassium Iodide Potassium Nitrate Propionic Acid Propylene Carbonate Selenious acid Sodium Acetate Sodium Bicarbonate Sodium Butyrate Sodium Carbonate Sodium Feredetate Sodium Fluoride Sodium Hydroxide Pellets Sodium Molybdate Sodium Perborate Sodium Propionate Sodium Selenite Pentahydrate Sodium Sulfate Sodium Tartrate Dihydrate Sodium Thiosulfate Stannous Chloride Dihydrate Stannous Fluoride Tartaric Acid Urea Zinc Carbonate Zinc Chloride Hot Items Ammonium Chloride Ammonium Persulfate Alpha Olefin Sulphonate Butylated Hydroxy Anisole Calcium Butyrate Calcium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Copper Chloride Copper Sulfate Sulphate D-Glucuronolactone Hydrazine Hydrate DC Directly Compressible Calcium Carbonate Encapsulated Citric Acid Encapsulated Fumaric Acid Encapsulated Sodium Bicarbonate Isatoic Anhydride Magnesium Butyrate Octyldodecanol Picric Acid Sodium Acetate Sodium Bisulphate Skatole; 3-methylindole Sodium Diacetate Sodium Formaldehyde Bisulfite Zinc Chloride Zinc Sulphate
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Aluminum Chlorohydrate Solution Aluminium Chlorohydrate Solution SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
CAS No.: 1327-41-9
EINECS: EC Number: 215-477-2
Molecular Weight: Varies
Chemical Formula: AlnCl(3n-m)(OH)m
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:
Acute toxicity, Oral (Category 5)
Skin corrosion/irritation (Category 2)
Serious eye damage/eye irritation (Category 2A)
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H303: May be harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
For the full text of the S-statement & R-phrases mentioned in this Section, see Section 16.
3. Composition/Information on Ingredients
Ingredient: Aluminum Chlorohydrate
CAS No.: 1327-41-9
Percent: 40-60% in water.
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Treat symptomatically.
5. Fire Fighting Measures
Flammability of the Product: The product is not flammable.
Products of Combustion: It forms oxides of aluminum and hydrochloric acid when heated to decomposition.
Fire: Non flammable.
Fire Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust/mist formation. Avoid breathing dust/mist. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water and swab.
7. Handling and Storage
Do not breathe dust/mist. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances. Avoid moisture and store away from water sources. It is to be stored in corrosive area.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established. Assure it as below 2mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Aluminum Chlorohydrate Solution is clear to yellowish liquid.
Solubility: Readily soluble in water and it reacts with it.
pH: 3 to 5.
Density: 1.3 to 1.4 gm/cc
Boiling Point: NA
Melting Point: -4C to -8C
Vapor Density (Air=1): No information found
Vapor Pressure (mm Hg): No information found
Evaporation Rate (BuAc=1): No information found
10. Stability and Reactivity
Stability: Aluminum Chlorohydrate Solution is stable under ordinary conditions of use and storage. It must be kept in air tight containers.
Hazardous Decomposition Products: It produces oxides of aluminum along with hydrochloric acid when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Aluminum Chlorohydrate Solution is incompatible with oxidizing material acids and alkalis.
Conditions to Avoid: Heat, Sun light, Incompatibles, Metals.
11. Toxicological Information
Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals: Oral, rat: LD50 = 9187 mg/kg for a 50% solution;
Carcinogenic Effects: Not a reported carcinogen .
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Toxicity: Toxicity to fish: LC50 - fish - Not availble
BOD5 and COD: Not available.
Avoid draining the material in waterways.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused in accordance with federal, state and local requirements.
14. Transport Information
DOT (USA) & ADR/RID
15. Regulatory Information
OSHA Hazards: Irritant.
SARA 311/312 Hazards: Immediate Acute Health Hazard.
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Canada - DSL/NDSL
Canada - WHMIS Not classified.
16. Other InformationDisclaimer:
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.