Isopropyl Iodide or 2-Iodopropane Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Isopropyl Iodide or 2-Iodopropane, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Isopropyl Iodide or 2-Iodopropane CAS Number 75-30-9, EINECS EC Number: 200-859-3, Molecular Formula: C3H7I, Molecular Weight: 169.99, HS Code 29035990 or 29036980
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Isopropyl Iodide or 2-Iodopropane.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Isopropyl Iodide or 2-Iodopropane Manufacturers
Isopropyl Iodide
2-Iodopropane Suppliers
Isopropyl Iodide or 2-Iodopropane is colorless, flammable, and volatile liquid.
General Properties and Specifications of Isopropyl Iodide or 2-Iodopropane:
Appearance: Clear colourless to slight yellow liquid.
Assay: 98.5% minimum.
Relative Density: 1.700-1.705 @ 20C.
Refractive Index: 1.499-1.500 @ 20C.
Melting Point: -90C.
Boiling Range: 88C to 90C.
Flash Point: 42C.
Stabilizer: Ag wire.
Solubility: Slightly soluble in water.
We also manufacture and supply as under:
Isopropyl Iodide or 2-Iodopropane
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
29 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Isopropyl Iodide or 2-Iodopropane SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 20-Oct-23
1. Product Identification
Product Name & Other Names: Isopropyl Iodide or 2-Iodopropane.
CAS No.: 75-30-9
EINECS EC Number: 200-859-3
Molecular Formula: C3H7I
Molecular Weight: 169.99
Relevant uses and uses advised against (if any): Laboratory and Industrial Use.
Supplier: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Flammable liquids Category 3 H226
Acute toxicity, oral Category 4 H302
Skin corrosion/irritation Category 2 H315
Serious eye damage/eye irritation Category 2A H319
Specific target organ toxicity - single exposure Category 3, Respiratory system, H335
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Flammable |
GHS Label Elements |
Signal Words: Danger
Hazard Statements:
H226: Flammable liquid and vapor.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary Statements:
P210: Keep away from heat.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
P362: Take off contaminated clothing and wash before reuse.
P405: Store locked up.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi Irritant
Xn Harmful.
Risk Phrases:
R10 Flammable.
R36/37/38, Risk Phrase: Irritating to eyes, respiratory system, and skin.
3. Composition/Information on Ingredients
Product Name & Other Names: Isopropyl Iodide or 2-Iodopropane.
CAS No.: 75-30-9
EINECS EC Number: 200-859-3
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce the risk of aspiration. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Use a mild soap if available. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: 42C.
Products of Combustion: Carbon oxides, hydrogen iodide and fumes.
Fire Extinguishing Media: Water fog. Alcohol foam. Dry chemical. Polymer foam. Dry chemical powder. Carbon dioxide (CO2). Do not use a solid water stream as it may scatter and spread fire. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Avoid dust/mist formation. Avoid breathing dust/mist. Ensure adequate ventilation. Wipe up with absorbent material (e.g., cloth, fleece). Clean contaminated surface thoroughly.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law. Dike the spilled material, where this is possible.
7. Handling and Storage
Precautions for safe handling: Do not handle or store near an open flame, heat, or other sources of ignition. All equipment used when handling the product must be grounded. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Keep away from heat and sources of ignition (spark or flame). Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong bases, and alkali metals.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Contains no substances with occupational exposure limit values.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Physical state: Clear colorless liquid. Turns brown on exposure to light due to liberation of Iodine.
Odor: Odorless.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.700-1.705 @ 20C.
Boiling point: 88C to 90C.
Melting point/Freezing point: -90C.
Flash point: 42C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility (water): Slightly soluble in water.
Viscosity: Not available.
Molecular Formula: C2H5I or CH3CH2I
Molecular Weight: 155.97
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. Vapor/air-mixtures are explosive at intense warming.
Hazardous Decomposition Products: It emits carbon oxides, hydrogen iodide and toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, strong bases, and alkali metals.
Conditions to Avoid: Avoid heat, sparks, open flames, and other ignition sources. Contact with incompatible materials.
11. Toxicological Information
Toxicity data:
LD50 Oral - Rat - 1100mg/kg.
Carcinogenicity: Not expected to be hazardous by IARC criteria.
Local effects: Harmful if swallowed. Harmful if inhaled or absorbed through the skin. Irritating to eyes, respiratory system, and skin. Causes serious eye irritation.
Germ cell mutagenicity: No data available.
Reproductive toxicity: No data available.
12. Ecological Information
Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 123,2 mg/l - 96 h.
Persistence and degradability: No data available.
Bioaccumulative potential: No data available.
Mobility in soil: No data available.
Results of PBT and vPvB assessment: No data available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of containers and unused contents in accordance with federal, state, and local requirements.
14. Transport Information
DOT USA & ADR/RID Europe:
Un Number: 2392
Proper shipping name: Iodopropanes.
Transport hazard class(es): 3, Packaging group: III.
IATA:
Un Number: 2392
Proper shipping name: Iodopropanes.
Transport hazard class(es): 3, Packaging group: III.
IMDG:
Un Number: 2392
Proper shipping name: Iodopropanes.
Transport hazard class(es): 3, Packaging group: III.
15. Regulatory Information
USA:
SARA 311/312 Hazards: Fire Hazard, Acute Health Hazard, Chronic Health Hazard.
California Prop. 65 Components: This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Section 16 - Additional Information
European/International Regulations European Labeling in Accordance with EC Directives
H226: Flammable liquid and vapor.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi Irritant
Xn Harmful.
Risk Phrases:
R10 Flammable.
R36/37/38, Risk Phrase: Irritating to eyes, respiratory system, and skin.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************