Aspartame Acesulfame USP NF FCC Food Grade Manufacturers, with SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Aspartame Acesulfame, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself
Search our website here:
Aspartame Acesulfame CAS Number 106372-55-8, EINECS EC Number: yy, Molecular Formula: C18H23O9N3S, Molecular Weight: 457.46, HS Code 29349990
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Aspartame Acesulfame.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Aspartame Acesulfame Manufacturers
USP NF FCC Food Grade Pure Suppliers
Aspartame-acesulfame salt is an artificial sweetener. It is produced by soaking a 2-1 mixture of aspartame and acesulfame potassium in an acidic solution and allowing it to crystallize; moisture and potassium are removed during this process. It is approximately 350 times as sweet as sucrose. It has been given the E number E962. It is approved for use as an artificial sweetener in the Europe. In North America it falls under the same regulations as aspartame and acesulfame-K, and is also approved for use in China, Russia, Hong-Kong, Australia and New Zealand. It tastes like sugar, and it has no calories. It is widely used in food and pharmaceutical industry. It is white crystalline powder.
Aspartame Acesulfame USP NF Grade Specifications:
C18H23O9N3S -- 457.45
Aspartame acesulfame salt;
l-Phenylalanine, l-α-aspartyl-2-methyl ester compound with 6-methyl-1,2,3-oxathiazin-4(3H )-one 2,2-dioxide (1:1) – CAS 106372-55-8
Aspartame Acesulfame contains NLT 63.0% and NMT 66.0% of aspartame, calculated on the dried basis. It contains NLT 34.0% and NMT 37.0% of acesulfame, calculated as the acid form on the dried basis.
A. Infrared Absorption
[Note: Do not dry specimens.]
Residue on Ignition: NMT 1.1%
Limit of Potassium: To pass the test. NMT 0.5%
Related Compounds: To pass the test. NMT 0.5%
Optical Rotation, Specific Rotation: To pass the test.
Loss on Drying: Dry a sample at 105C for 4 h: it loses NMT 0.5% of its weight.
Transmittance: The transmittance of a 1-in-100 solution of Aspartame Acesulfame in distilled water, determined in a 1-cm cell at 430 nm with a suitable spectrophotometer, is NLT 0.95.
Packaging and Storage: Preserve in well-closed containers, and store in a cool, dry place.
Aspartame-Acesulfame Salt FCC Food Grade:
APM-Ace; [2-carboxy-_-(N-(b-methoxycarbonyl-2-phenyl)ethylcarbamoyl)]ethanaminium 6-methyl-4-oxo-1,2,3-oxathiazin-3-ide-2,2-dioxide; L-Phenylalanine, L-alpha-aspartyl-2-methyl ester compound with 6-methyl-1,2,3-oxathiazin-4(3H)-one 2,2-dioxide (1:1)
C18H23O9N3S Formula weight 457.45
CAS Number 106372-55-8
Aspartame-Acesulfame Salt occurs as a white, crystalline powder. It is sparingly soluble in water and slightly soluble in alcohol.
Identification: An infrared absorption spectrum of a potassium bromide dispersion of Aspartame-Acesulfame Salt exhibits maxima only at the same wavelengths as those of a typical spectrum as shown in the section on Infrared Spectra, using the same test conditions as specified therein.
Assay: Not less than 63.0% and not more than 66.0% of aspartame, calculated on the dried basis. Not less than 34.0% and not more than 37.0% of acesulfame, calculated as acid formed on the dried basis.
5-Benzyl-3,6-dioxo-2-piperazineacetic Acid (DKP): Not more than 0.5%.
Lead: Not more than 1 mg/kg.
Loss on Drying: Not more than 0.5%.
Optical (Specific) Rotation: [alphaD20°: Between +14.5° and +16.5°, calculated on the dried basis.
Other Related Impurities: Not more than 1.0%.
Potassium: Not more than 0.5%.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
USA, Canada, Mexico and other American
neighbouring buyers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 25 August, 2022
List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Carbonate Ammonium Chloride Ammonium Persulfate Borax; Sodium Borate Boric Acid Calcium Chloride Calcium Saccharate Calcium Sulfate Carbamide Peroxide Chromic Chloride Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Glacial Acetic Acid Lactobionic Acid Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Bromide Potassium Chloride Potassium Hydroxide Pellets Potassium Nitrate Propylene Carbonate Potassium Monopersulfate Selenious acid Sodium Acetate Sodium Bromate Sodium Diacetate Sodium Formaldehyde Bisulfite Sodium Lactobionate Sodium Thiosulfate Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Aspartame Acesulfame SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 21-Mar-22
1. PRODUCT DESCRIPTION
Product Name & Other Names: Aspartame Acesulfame.
CAS Number: 106372-55-8
EINECS EC Number: --
Molecular Formula: C18H23O9N3S
Molecular Weight: 457.46
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS & Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: Aspartame Acesulfame.
CAS Number: 106372-55-8
4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.
5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire. Water. Foam. Dry chemical or CO2. Oxides of Sulfur and Nitrogen may arise on decomposition.
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus. Use water spray to cool unopened containers.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids.
8. SPECIAL PROTECTION INFORMATION
Exposure Guidelines: This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. Store in a freezer.
9. PHYSICAL DATA
Appearance and Odor: White crystalline powder.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble in water.
Viscosity: Not available.
Molecular Formula: C18H23O9N3S
Molecular Weight: 457.46
10. REACTIVITY DATA
Stability: Stable under ordinary conditions.
Conditions to Avoid: Heat, humidity, sunlight, strong oxidizing agents.
Incompatibility (Materials to Avoid): Strong oxidizing agents, Strong acids
Hazardous Decomposition Products: Sulfur and Nitrogen oxide.
Hazardous Polymerization: Will not occur.
11. TOXICITY DATA
Toxicity to Animals: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL DATA
Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable Federal, State and Local regulations.
14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMO/IMDG: Not regulated.
IATA/ICAO: Not regulated.
15. REGULATORY INFORMATION
USA:16. ADDITIONAL INFORMATION
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.