Aluminum Zirconium Tetrachlorohydrex or Aluminium Zirconium Tetrachlorohydrex Glycine Manufacturers, SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Aluminum Zirconium Tetrachlorohydrex or Aluminium Zirconium Tetrachlorohydrex Glycine, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Aluminum Zirconium Tetrachlorohydrex or Aluminium Zirconium Tetrachlorohydrex Glycine Solution: CAS Number: yy, EINECS EC Number: yyyyy, Molecular Formula: yy, Molecular Weight: yy, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for Aluminum Zirconium Tetrachlorohydrex or Aluminum Zirconium Tetrachlorohydrex Glycine Solution.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Aluminium Zirconium Tetrachlorohydrex or Aluminum Zirconium Tetrachlorohydrex Glycine Manufacturers
Aluminum Zirconium Tetrachlorohydrex
Aluminium Zirconium Tetrachlorohydrex Glycine Solution Pure Suppliers
Aluminium zirconium tetrachlorohydrex glycine is the name for a preparation used as an antiperspirant in many deodorant products. It is selected for its ability to obstruct pores in the skin and prevent sweat from leaving the body. Its anhydrous form gives it the added ability of absorbing moisture. Many prefer Aluminum zirconium tetrachlorohydrex glycine over other types of aluminum salts because it’s much more tolerated by the skin and less likely to cause irritation. Europe has established tight restrictions over its use but USA FDA, on the other hand, has reviewed the safety of this ingredient and approved it for use in OTC antiperspirant products.
Aluminum Zirconium Tetrachlorohydrate USP Grade:
AlyZr(OH)3y+4-xClx.nH2O
Aluminum Zirconium Tetrachlorohydrate is a polymeric, loosely hydrated complex of basic aluminum zirconium chloride that encompasses a range of aluminum to zirconium atomic ratios between 2.0:1 and 5.99:1 and a range of (aluminum plus zirconium)-to-chloride atomic ratios between 1.5:1 and 0.9:1. It contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of anhydrous aluminum zirconium tetrachlorohydrate.
Packaging and storage: Preserve in well-closed containers.
Labeling: The label states the content of anhydrous aluminum zirconium tetrachlorohydrate.
Identification: A solution (1 in 10) responds to the test for Chloride.
pH: between 3.0 and 5.0, in a solution [15 in 100 (w/w)].
Arsenic: 2 microgm per g.
Heavy metals: To pass the test. Not more than 20 microgm per g is found.
Limit of iron: To pass the test. 150 microgm per g limit.
Content of aluminum: To be determined.
Content of zirconium: To be determined.
Aluminum/zirconium atomic ratio: Divide the percentage of aluminum found in the test for Content of aluminum by the percentage of zirconium found in the test for Content of zirconium, and multiply by 92.97/26.98, in which 92.97 is the atomic weight of zirconium corrected for 2% hafnium content, and 26.98 is the atomic weight of aluminum: the ratio is between 2.0:1 and 5.99:1.
Content of chloride: To be determined.
(Aluminum plus zirconium)/chloride atomic ratio: Calculate the (aluminum plus zirconium)/chloride atomic ratio by the formula:
[(Al/26.98) + (Zr/92.97)]/(Cl/35.453)
in which Al, Zr, and Cl are the percentages of aluminum, zirconium, and chloride as determined in the tests for Content of aluminum, Content of zirconium, and Content of chloride, respectively; 26.98 is the atomic weight of aluminum; 92.97 is the atomic weight of zirconium corrected for 2% hafnium content; and 35.453 is the atomic weight of chlorine: the ratio is between 1.5:1 and 0.9:1.
Assay: Calculate the percentage of anhydrous aluminum zirconium tetrachlorohydrate in the Aluminum Zirconium Tetrachlorohydrate by the formula:
Al({26.98y + 92.97 + 17.01[3y + 4 (y + 1)/z] + 35.453(y + 1)/z}/26.98y)
in which Al is the percentage of aluminum found in the test for Content of aluminum, y is the aluminum/zirconium atomic ratio found in the test for Aluminum/zirconium atomic ratio, z is the (aluminum plus zirconium)/chloride atomic ratio found in the test for (Aluminum plus zirconium)/chloride atomic ratio, 26.98 is the atomic weight of aluminum, 92.97 is the atomic weight of zirconium corrected for 2% hafnium content, 17.01 is the molecular weight of the hydroxide anion (OH), and 35.453 is the atomic weight of chlorine (Cl).
Aluminum Zirconium Tetrachlorohydrate Solution USP Grade:
Aluminum Zirconium Tetrachlorohydrate Solution is a polymeric, loosely hydrated complex of basic aluminum zirconium chloride that encompasses a range of aluminum-to-zirconium atomic ratios between 2.0:1 and 5.99:1 and a range of (aluminum plus zirconium)-to-chloride atomic ratios between 1.5:1 and 0.9:1. The following solvents may be used: water, propylene glycol, or dipropylene glycol. It contains the equivalent of not less than 90.0 percent and not more than 110.0 percent of the labeled concentration of anhydrous aluminum zirconium tetrachlorohydrate.
Packaging and storage: Preserve in well-closed containers.
Labeling: Label Solution to state the solvent used and the claimed concentration of anhydrous aluminum zirconium tetrachlorohydrate.
Identification:
A: A solution containing the equivalent of about 100 mg of anhydrous aluminum zirconium tetrachlorohydrate per mL responds to the test for Chloride.
B: Identification of propylene glycol (where stated on the label): To pass the test.
C: Identification of dipropylene glycol (where stated on the label): To pass the test.
pH: between 3.0 and 5.0, in a solution prepared by diluting 3 g of the Solution with water to obtain 10 mL.
Arsenic: The limit is 2 microgm per g.
Heavy metals: To pass the test. Not more than 10 microgm per g is found.
Limit of iron: To pass the test. The limit is 75 4g per g.
Content of aluminum: To be determined.
Content of zirconium: To be determined.
Aluminum/zirconium atomic ratio: Divide the percentage of aluminum found in the test for Content of aluminum by the percentage of zirconium found in the test for Content of zirconium and multiply by 92.97/26.98, in which 92.97 is the atomic weight of zirconium corrected for 2% hafnium content, and 26.98 is the atomic weight of aluminum: the ratio is between 2.0:1 and 5.99:1.
Content of chloride: To be determined.
(Aluminum plus zirconium)/chloride atomic ratio: Calculate the (aluminum plus zirconium)/chloride atomic ratio by the formula:
[(Al/26.98) + (Zr/92.97)]/(Cl/35.453)
in which Al, Zr, and Cl are the percentages of aluminum, zirconium, and chloride found in the test for Content of aluminum, Content of zirconium, and Content of chloride, respectively; 26.98 is the atomic weight of aluminum; 92.97 is the atomic weight of zirconium corrected for 2% hafnium content; and 35.453 is the atomic weight of chlorine: the ratio is between 1.5:1 and 0.9:1.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We manufacture and supply as under:
Activated Alumina Aluminum Oxide
Aluminum Chloride Anhydrous & Hexahydrate
Dihydroxyaluminum Sodium Carbonate
Dihydroxyaluminum Aminoacetate
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
4 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Seperate hazards statements will be required for Aluminum Zirconium Tetrachlorohydrex or Aluminum Zirconium Tetrachlorohydrex Glycine Solution and for different solvents in solution. Aluminum Zirconium Tetrachlorohydrex and its solutions are generally classed as non hazardous and not regulated for transport.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************