Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine Manufacturers, SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Aminoethyl Ethanolamine or Aminoethylethanolamine, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine: CAS Number: 111-41-1, EINECS EC Number: 203-867-5, Molecular Formula: C4H12N2O, Molecular Weight: 104.15, HS Code ---**

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine Manufacturers

Aminoethyl Ethanolamine
AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine Pure Suppliers
Aminoethyl Ethanolamine

Aminoethylethanolamine or AEEA or Aminoethyl Ethanolamine or Amino Ethyl Ethanolamine is an organic base used in the industrial manufacture of fuel and oil additives, chelating agents, and surfactants. It is a clear, colorless liquid with a weak ammonia-like odor. It is used in the manufacture of lube oil additives, fuel additives, chelating agents, surfactants, and fabric softeners, among other applications. It is also used as an Intermediate in the manufacture of sequestering agents, antistatic agents, corrosion inhibitors, insecticides, etc.

Specifications of Aminoethyl Ethanolamine or Aminoethylethanolamine or Amino Ethyl Ethanolamine:
Appearance: Clear colorless liquid.
Odor: Mildly ammoniacal.
Melting Point <-10C
Boiling Point 244C
Relative Density: 1.03
Flash Point: 130C
Assay: 99.5% minimum.
Ethylenediamine:100 ppm maximum.
Chlorides: Absent
Water: 0.2% maximum.

We manufacture and supply as under:

Aminoethyl Ethanolamine

Dimethylethanolamine

Diethanolamine

Monoethanolamine

Triethanolamine

R-Phenylethylamine

Dibutylamine

Diethylamine

Dipropylamine

Hexamine

n-Butylamine.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 25 August, 2022

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Aminoethyl Ethanolamine Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data
Sheet 29-Sep-20

1. Product Identification

Product Name & Other Names: Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine
CAS Number: 111-41-1
EINECS EC Number
: 203-867-5
Molecular Formula
: C4H12N2O
Molecular Weight
: 104.15
Relevant uses and uses advised against (if any): Fracturing and Industrial Manufacturing Use.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 1A, B, C - H314
Skin sensitization Category 1 - H317
Specific target organ toxicity - single exposure, Category 3, Respiratory system - H335
Reproductive toxicity Category 1B - H360Df
Hazardous to the aquatic environment, acute hazard Category 3

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Health Hazzard
Health Hazard

GHS Label Elements
corrosive.png
Health Hazard

Signal Words: Danger

Hazard Statements:
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H335: May cause respiratory irritation.
H360Df: May damage fertility or the unborn child.

Precautionary Statements:
P201: Obtain special instructions before use.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C = Corrosive
Risk Phrases:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.
R60 May impair fertility.
R61 May cause harm to the unborn child.

3. Composition/Information on Ingredients

Product Name & Other Names: Aminoethyl Ethanolamine or AEEA or Aminoethylethanolamine or Amino Ethyl Ethanolamine
CAS Number: 111-41-1
EINECS EC Number
: 203-867-5

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.

5. Fire Fighting Measures

Flash Point: Closed cup: 130C
Auto-ignition Temperature: 345C
Fire: Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapors possible in the event of fire. In a fire or if heated, a pressure increase will occur and the container may burst.
Suitable extinguishing media: Water spray, dry powder, foam, carbon dioxide. Avoid solid water stream.
Products of Combustion: Oxides of carbon and nitrogen along with toxic fumes will be formed.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the positive pressure mode.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental  precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: For small spills use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Product should be worked up in closed equipment as far as possible. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids. Containers of this material may be hazardous when empty.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Not established. Ensure minimum contact.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colorless liquid.
Odor: Mildly ammoniacal.
Odor threshold: Not available.
pH: 11-12
Relative density: Approximately 1.03
Melting point/freezing point: <-10C.
Initial boiling point and boiling range: 244C
Flash Point: 130C
Auto-ignition temperature: 345C
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Miscible
Viscosity: Not available.
Molecular Formula: C4H12N2O
Molecular Weight
: 104.15

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic gases and vapors may be released if involved in a fire. Oxides of carbon and nitrogen along with toxic fumes will be formed.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, oxidizing agents.
Conditions to Avoid: Incompatibles, heat sunlight, copper zinc.

11. Toxicological Information

LD50/rabbit: > 2,000 mg/kg
Carcinogenic Effects: Not a reported carcinogen.
Reproductive Toxicity: The results of animal studies suggest a fertility impairing effect with high doses.
Developmental Toxicity/Teratogenicity: In animal studies the substance showed a developmental toxic/teratogenic effect.

12. Ecological Information

Toxicity to fish: LC50 Oncorhynchus mykiss (rainbow trout): > 100 mg/l; 96 h.
Toxicity to daphnia and other aquatic invertebrates: EC50 Daphnia magna (Water flea): 190 mg/l; 48 h.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with law.

14. Transport Information

US DOT & ADR/RID Europe:
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S. (2-(2-AMINOETHYLAMINO)ETHANOL)
Hazard Class/Division 8; Packing Group PG II
Identification No. UN2735
IATA & IMDG:
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S. (2-(2-AMINOETHYLAMINO)ETHANOL)
Hazard Class/Division 8; Packing Group PG II
Identification No. UN2735

15. Regulatory Information

USA:
TSCA, USA: listed.
SARA 311/312 CLASSIFICATION: Acute, Chronic.

16. Other Information

European Labeling in Accordance with EC Directives:
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H335: May cause respiratory irritation.
H360Df: May damage fertility or the unborn child.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C = Corrosive
Risk Phrases:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.
R60 May impair fertility.
R61 May cause harm to the unborn child.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************