|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Monosodium Disodium Trisodium Phosphate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Turkey, Brazil, Chile, Argentina, Dubai etc. |
|
--------
--------
Monosodium Phosphate Sodium Phosphate Monobasic BP USP NF Manufacturers
Buy Monosodium Phosphate,
(Monobasic Sodium Phosphate Manufacturers); Door Delivery
Sodium Phosphate BP USP NF IP ACS FCC Food Grade AR Analytical Reagent Grade
Monosodium
Phosphate Monobasic Sodium Phosphate Monobasic IP BP USP NF FCC ACS Food
Grade Analytical Reagent Grade Manufacturers
Disodium Phosphate
Dibasic Sodium Phosphate Dibasic IP BP USP NF FCC ACS Food Grade Analytical
Reagent Grade Manufacturers
Trisodium
Phosphate Tribasic Sodium Phosphate Tribasic IP BP USP NF FCC ACS Food Grade
Analytical Reagent Grade Manufacturers
For MSDS Sheet Click Mono Sod. Phosph. MSDS
Sodium Phosphate Monobasic
Technical & Pure Monosodium Phosphate,
Monobasic Sodium Monobasic
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Mono Sodium Phosphate or Monosodium Phosphate (NaH2PO4, MSP), also known as anhydrous monobasic sodium phosphate or monosodium phosphate or sodium phosphate monobasic, is used as a laxative and, in combination with other sod. phos., as a pH buffer.
The pKa is 7.20. The sodium chloride equivalent value, or E-Value, is 0.49. It is soluble in 4.5 parts water. Monosodium phosphate is most commonly available as colorless crystals or a white powder. Sodium phosphate monobasic is insoluble in alcohol.
| Specification |
Monosodium Phosphate Crystals Sodium Phosphate Monobasic |
Monosodium Phosphate Anhydrous Sodium Phosphate Monobasic |
|
P2O5
Content Assay Loss on Drying pH of 2% Solution Insoluble Packing |
44% 98% Less than 24% 4.4-5 0.025% 50 Kg HDPE Bags |
59% 98% 1% 4.4-5 0.5% 50 Kg HDPE Bags |
Sodium Phosphate Monobasic ACS
Reagent Chemicals
ACS Specificatios
Sodium Phosphate, Monobasic, Monohydrate
Sodium Dihydrogen Phosphate Monohydrate
NaH2PO4
. H2O
Formula
Wt 137.99
CAS Number 10049-21-5
REQUIREMENTS
Assay: 98.0-102.0% NaH2PO4 - H2O
pH of a 5% solution: 4.1-4.5 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 5 ppm
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Potassium (K): 0.01%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Dihydrogen Phosphate Monohydrate BP
NaH2PO4,H2Oıı 138.0ıı
10049-21-5
Action
and use
Excipient.
DEFINITION
Sodium
Dihydrogen Phosphate Monohydrate contains not less than 98.0% and not more than
100.5% of NaH2PO4, calculated with reference to the dried substance.
CHARACTERISTICS
Colourless
crystals or a white powder.
Very
soluble in water; very slightly soluble in ethanol (96%).
Dissolve
10.0 g in sufficient carbon dioxide-free water prepared from distilled
water to produce 100 ml (solution S).
IDENTIFICATION
A. Solution
S is faintly acid.
B. Solution
S yields the reactions characteristic of phosphates.
C. Solution
S neutralized with a 10% w/v solution of potassium hydroxide yields
reaction A characteristic of sodium salts.
D. Complies
with the test for Loss on drying.
TESTS
Acidity
pH of a
mixture of 5 ml of solution S and 5 ml of carbon dioxide-free water , 4.2
to 4.5.
Clarity
and colour of solution
Solution S
is clear and colourless.
Arsenic
0.5 g
complies with the limit test for arsenic - 2 ppm.
Heavy metals
12 ml of
solution S complies with limit test A for heavy metals. Use lead
standard solution (1 ppm Pb) to prepare the standard (10 ppm).
Iron
10 ml of
solution S complies with the limit test for - iron 10 ppm.
Chloride
Dilute 2.5
ml of solution S to 15 ml with water. The resulting solution complies
with the limit test for chlorides - 200 ppm.
Sulphate
To 5 ml of
solution S add 0.5 ml of hydrochloric acid and dilute to 15 ml with distilled water. The resulting solution complies with the
limit test for
sulphate - 300 ppm.
Reducing
substances
To 5 ml of
solution S add 0.25 ml of 0.02M potassium permanganate and 5 ml of 1M sulphuric acid and heat in a water bath for 5 minutes. The solution retains
a slight red colour.
Loss on
drying
When dried
to constant weight at 130°, loses 11.5 to 14.5% of its weight. Use 0.5 g.
Monobasic Sodium Phosphate USP NF
Monobasic
Sodium Phosphate
NaH2PO4·xH2O
(anhydrous)
119.98
Phosphoric
acid, monosodium salt, monohydrate.
Monosodium phosphate monohydrate 137.99 [10049-21-5]
Phosphoric acid, monosodium salt, dihydrate
Monosodium phosphate dihydrate 156.01 [13472-35-0]
Anhydrous [7558-80-7]
Monobasic Sodium Phosphate contains one or two molecules of water of hydration, or is anhydrous. It contains not less than 98.0 percent and not more than 103.0 percent of NaH2PO4, calculated on the anhydrous basis.
Identification— A solution (1 in 20) responds to the tests for
Sodium 191 and for Phosphate.
pH: between 4.1 and 4.5, in a solution containing the equivalent of 1.0 g of
NaH2PO4·H2O in 20 mL of water.
Water:
less than 2.0% (anhydrous form); between 10.0% and 15.0% (monohydrate);
between 18.0% and 26.5% (dihydrate).
Insoluble substances— Dissolve a portion equivalent to 10.0 g of NaH2PO4·H2O
in 100 mL of hot water, filter through a tarred filtering crucible, wash the
insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the
residue so obtained does not exceed 20 mg (0.2%).
Chloride— A portion equivalent to 1.0 g of NaH2PO4·H2O shows no more
chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Sulfate—
A portion equivalent to 0.20 g of NaH2PO4·H2O shows no more sulfate than
corresponds to 0.30 mL of 0.020 N sulfuric acid (0.15%).
Aluminum, calcium, and related elements— A solution containing the
equivalent of 1.0 g of NaH2PO4·H2O in 10 mL of water does not become turbid when
rendered slightly alkaline to litmus paper with 6 N ammonium hydroxide.
Arsenic—the
limit is 8 ppm.
Heavy
metals—the limit is 0.002%.
Sodium Phosphate, Monobasic FCC
Monosodium
Phosphate; Sodium Biphosphate;
Monosodium
Dihydrogen Phosphate
NaH2PO4
Formula wt, anhydrous 119.98
NaH2PO4·H2O
Formula wt, monohydrate 137.99
INS: 339(i)
CAS: anhydrous [7558-80-7]
CAS:
monohydrate [10049-21-5]
DESCRIPTION
Sodium
Phosphate, Monobasic, is anhydrous or contains one or two molecules of water of
hydration and is slightly hygroscopic. The anhydrous form occurs as a white,
crystalline powder or granules. The hydrated forms occur as white or transparent
crystals or granules. All forms are freely soluble in water, but are insoluble
in alcohol. The pH of a 1:100 solution is between 4.1 and 4.7.
Function: Buffer; emulsifier; nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for
Phosphate and for Sodium.
Assay: Not less than 98.0% and not more than 103.0% of NaH2:PO4
after drying.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on
Drying Anhydrous: Not more than 2.0%; Monohydrate: Between
10.0% and 15.0%; Dihydrate: Between 20.0% and 25.0%.
Mono Monosodium Phosphate Monobasic Sodium Phosphate Monobasic ACS BP USP NF FCC Food Grade manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright
and Usual
Disclaimer
is Applicable.
Last updated:
21 March, 2012.
----------------
Global or International Monobasic Sodium Phosphate Monobasic or Monosodium Phosphate Suppliers, Exporters, Importers, Manufacturers
Exporters to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Argentina Chile Dubai etc.
----------------
Monobasic Sodium Phosphate Monobasic Monosodium Phosphate