2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of 2-Butyl-4-chloro-5-formylimidazole or BCFI, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde: CAS Number: 83857-96-9, EINECS EC Number: 410-260-0, Molecular Formula: C8H11ClN2O or C3N2HClCHOCH2CH2CH2CH3, Molecular Weight: 186.64, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for 2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde.
For SDS MSDS Sheet Click
SDS MSDS Sheet of 2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde Manufacturers
2-Butyl-4-chloro-5-formylimidazole
BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde Pure Suppliers
Properties and Specifications of 2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde:
Appearance: Light yellow to orange powder to crystal.
Assay: 99% minimum.
Melting point: 96C to 100C.
Solubility: Slightly soluble in DMSO & methanol.
We also manufacture and supply as under:
2-Butyl-4-chloro-5-formylimidazole
1,3-Dimethyl-2-Imidazolidinone
L-Histidine Base or 2-Amino-3-(1H-imidazol-4-yl)propanoic Acid.
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
31 March, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 27-Nov-20
1. Product Identification
Product Name & Other Names: 2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde.
CAS No.: 83857-96-9
EINECS EC Number: 410-260-0
Molecular Formula: C8H11ClN2O or C3N2HClCHOCH2CH2CH2CH3
Molecular Weight: 186.64
Relevant uses and uses advised against (if any): Laboratory and Industrial Use.
Supplier: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin sensitization, Category 1, H317
Hazardous to the aquatic environment, long-term hazard Category 2, H411
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
GHS Label Elements |
Signal Words: Warning
Hazard Statements:
H317: May cause an allergic skin reaction.
H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements:
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/national regulation.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi Irritant.
N Dangerous for the environment.
Risk Phrases:
R43: May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
3. Composition/Information on Ingredients
Product Name & Other Names: 2-Butyl-4-chloro-5-formylimidazole or BCFI or 2-Butyl-5-chloro-1H-imidazole-4-carboxaldehyde.
CAS No.: 83857-96-9
EINECS EC Number: 410-260-0
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Use a mild soap if available. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. For minor skin contact, avoid spreading material on unaffected skin.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Products of Combustion: Carbon oxides, hydrogen chloride, nitrogen oxides and toxic fumes.
Fire Extinguishing Media: Water fog. Alcohol foam. Dry chemical. Polymer foam. Dry chemical powder. Carbon dioxide (CO2). Avoid a solid water stream as it may scatter and spread fire. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. Accidental Release Measures
Personal precautions: Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering. Keep out of low areas.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water.
Methods for containment: Stop leak if you can do so without risk. Move containers to a safe and open area if the leak is irreparable. Prevent entry into waterways, sewers, basements or confined areas.
Methods for cleaning up: Clean up in accordance with all applicable regulations. Should not be released into the environment.
Small Spill: Avoid dust/mist formation. Avoid breathing dust/mist. Ensure adequate ventilation. Wipe up with absorbent material (e.g. cloth, fleece). Clean contaminated surface thoroughly.
Large Spill: Contain spills. Use a non-combustible material like vermiculite, sand or earth to cover up the product and place into a container for later disposal.
7. Handling and Storage
Precautions for safe handling: Do not handle or store near an open flame, heat or other sources of ignition. All equipment used when handling the product must be grounded. Use only with adequate ventilation. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, strong acids.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established. Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Light yellow to orange powder to crystal.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Boiling point: Not available.
Melting point/Freezing point: 96C to 100C.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Slightly soluble in DMSO & methanol.
Viscosity: Not available.
Molecular Formula: C8H11ClN2O or C3N2HClCHOCH2CH2CH2CH3
Molecular Weight: 186.64
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon oxides, hydrogen chloride, nitrogen oxides and toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, strong acids.
Conditions to Avoid: Avoid light, heat, sparks, open flames and other ignition sources. Contact with incompatible materials.
11. Toxicological Information
Toxicity data:
LD50 Oral - Rat - male and female - > 2.000 mg/kg
LD50 Dermal - Rat - male and female - > 2.000 mg/kg
Carcinogenicity: Not expected to be hazardous by IARC, OSHA criteria.
Sensitization: May cause sensitization by skin contact.
Mutagenic Effects: No information available
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.
12. Ecological Information
Toxicity to fish: semi-static test LC50 - Danio rerio (zebra fish) - 32,7 mg/l - 96,0 h.
Toxicity to daphnia & other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 5,6 mg/l - 48 h.
Aquatic toxicity: May cause long-term adverse effects in the aquatic environment. Toxic to aquatic life. Discharge into the environment must be avoided.
Bioaccumulative potential: No information available.
Mobility in soil: No information available.
Results of PBT and vPvB assessment: No information available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN proper shipping name: Environmentally hazardous substance, solid, n.o.s. (2-Butyl-5-chloro-1Himidazole-4-carboxaldehyde).
UN number: 3077; Transport hazard class(es): 9; Packing group: III
IMDG/IMO & IATA/ICAO:
UN proper shipping name: Environmentally hazardous substance, solid, n.o.s. (2-Butyl-5-chloro-1Himidazole-4-carboxaldehyde).
UN number: 3077; Transport hazard class(es): 9; Packing group: III
15. Regulatory Information
USA:
SARA 311/312 Hazards: Acute Health Hazard
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 16 - Additional Information
European/International Regulations European Labeling in Accordance with EC Directives
H317: May cause an allergic skin reaction.
H411: Toxic to aquatic life with long lasting effects.
Hazard Symbols:
Xi Irritant.
N Dangerous for the environment.
Risk Phrases:
R43: May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************