Yellow Beeswax BP Ph Eur USP NF FCC Food Grade Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Yellow Beeswax BP Ph Eur USP NF FCC Food Grade, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Yellow Beeswax CAS Number 8012-89-3, EINECS EC Number: 232-383-7,HS Code 15219010
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Yellow Beeswax.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Yellow Beeswax Manufacturers
Yellow Beeswax
BP Ph Eur USP NF FCC Food Grade Suppliers
General Properties and Specifications of Yellow Beeswax:
Appearance: Yellow or light brown pieces or plates with a fine-grained, matt and non-crystalline fracture.
Odor: None or faint.
Melting Point: about 62C to 65C.
Solubility: Practically insoluble in water and partially soluble in hot ethanol.
Storage: Preserve in well-closed containers.
Yellow Wax USP NF Grade Specifications:
DEFINITION
Yellow Wax is the purified wax from the honeycomb of the bee [Apis mellifera L. (Fam. Apidae)]. The crude beeswax used to prepare Yellow Wax conforms to the Saponification Cloud Test.
SPECIFIC TESTS
Saponification Cloud Test:
Sample: 3.00 g
Alcoholic potassium hydroxide: Dissolve 40 g of potassium hydroxide in about 900 mL of aldehyde-free alcohol maintained at a temperature not exceeding 15C, and then when solution is complete, warm to room temperature, and add aldehyde-free alcohol to make 1000 mL.
Analysis: Place the Sample in a 100-mL round-bottom boiling flask fitted with a ground-glass joint. Add 30 mL of Alcoholic potassium hydroxide. Reflux the mixture gently for 2 h. At the end of this period, open the flask, insert a thermometer into the solution, and place the flask in a container of water at a temperature of 80°. Rotate the flask in the bath while both the bath and the solution cool.
Acceptance criteria: The solution shows no cloudiness or globule formation before the temperature reaches 65C.
Melting Range or Temperature: 62C –65C.
Fats or Fatty Acids, Japan Wax, Rosin, and Soap: To pass the test.
Fats and Fixed Oils, Acid Value (Free Fatty Acids): To pass the test. --- Acceptance criteria: 17–24
Fats and Fixed Oils, Ester Value: Acceptance criteria: 72–79
Packaging and Storage: Preserve in well-closed containers.
Yellow Beeswax BP Ph Eur Grade Specifications:
Action and use: Excipient.
DEFINITION
Wax obtained by melting the walls of the honeycomb made by the honey-bee, Apis mellifera L., with hot water and removing foreign matter.
CHARACTERS
Appearance: Yellow or light brown pieces or plates with a fine-grained, matt and non-crystalline fracture; when warmed in the hand they become soft and malleable.
It has a faint odour, characteristic of honey. It is tasteless and does not stick to the teeth.
Solubility: Practically insoluble in water, partially soluble in hot ethanol (90 per cent V/V) and completely soluble in fatty and essential oils.
Relative density: About 0.960.
TESTS
Drop point: 61 °C to 66 °C.
Acid value: 17.0 to 22.0.
Ester value: 70 to 80.
Saponification value: 87 to 102
Ceresin, paraffins and certain other waxes: To pass the test.
Glycerol and other polyols: Maximum 0.5 per cent m/m, calculated as glycerol.
Beeswax, Yellow FCC Food Grade Specifications:
Yellow Wax
INS: 901 CAS 8012-89-3
DESCRIPTION
Beeswax, Yellow, occurs as a yellow to gray-brown solid with an agreeable, honey odor. It is the purified wax from the honeycomb of the bee Apis mellifera L. (Fam. Apidae) and consists primarily of myricyl palmitate (myricin), cerotic acid and ester, and some high-carbon paraffins. It is somewhat brittle when cold, and presents a dull, granular, non-crystalline fracture when broken. It becomes pliable at a temperature of about 35C. Its specific gravity is about 0.95. Beeswax, Yellow, is insoluble in water and sparingly soluble in cold alcohol. Boiling alcohol dissolves cerotic acid and part of the myricin. It is completely soluble in chloroform, in ether, and in fixed and volatile oils. It is partly soluble in cold carbon disulfide and completely soluble in it at temperatures of 30C or above.
Function: Candy glaze and polish; raw material for flavoring agent.
Acid Value: Between 18 and 24.
Carnauba Wax: Passes test.
Ester Value: Between 72 and 77.
Fats, Japan Wax, Rosin, and Soap: Passes test.
Lead: Not more than 5 mg/kg.
Melting Range: Between 62C and 65C.
Saponification Cloud Test: Passes test.
For Original Monographs of IP Indian Pharmacopoeia EP Ph Eur European Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
30 October, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Yellow Beeswax SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 23-Oct-24
1. Product Identification
Product Name & Other Names: Yellow Beeswax.
CAS No.: 8012-89-3
EINECS EC Number: 232-383-7
Relevant uses and uses advised against (if any): Industrial use only.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+ P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Yellow Beeswax.
CAS No.: 8012-89-3
EINECS EC Number: 232-383-7
4. First Aid Measures
Always get medical attention after the first aid is over.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wash affected areas with soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if symptoms occur.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard. It is flammable at higher temperatures. This material may burn but will not ignite readily.
Explosion: Reactions with incompatibles may pose an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing materials. Storage: Preserve in well-closed containers.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres. If heat is involved, an ammonia/methylamine, dust/mist cartridge may be necessary.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Yellow or light brown pieces or plates with a fine-grained, matt and non-crystalline fracture.
Odor: None or faint honey-like odor.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.5
Boiling Point: Not available.
Melting Point: about 62C to 65C.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Practically insoluble in water and partially soluble in hot ethanol.
Viscosity: Not available.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It decomposes upon heating and forms nitrogen and carbon oxides along with fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents and acids.
11. Toxicological Information
Oral rat LD50: >5000 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: NA.
Persistence and Degradability: Expected to degrade.
Mobility: No information available.
Bioaccumulation/ Accumulation: This product is readily biodegradable.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Follow standard disposal procedures. Dispose of container of and unused contents in accordance with legal requirements.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMDG/IMO: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
15. Regulatory Information
USA Regulations:
California Proposition 65: This product contains no chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm
16. Other Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************