Wool Fat or Lanolin EP BP Ph Eur USP FCC Food Grade Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Wool Fat or Lanolin EP BP Ph Eur USP FCC Food Grade, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Wool Fat or Lanolin or Wool Yolk or Wool Wax or Sheep Grease CAS Number 8006-54-0, EINECS EC Number: 232-348-6, Molecular Formula: yy, Molecular Weight: yy, HS Code 15050020
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Wool Fat or Lanolin.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Wool Fat or Lanolin Manufacturers
Wool Fat
Lanolin Wool Yolk or Wool Wax or Sheep Grease EP BP Ph Eur FCC Food Grade Suppliers
Wool Fat or Lanolin or Wool Yolk or Wool Wax or Sheep Grease is a wax secreted by wool-bearing animals. Lanolin and its derivatives are used extensively in both the personal care and health care sectors such as topical liniments. Lanolin is used commercially in many industrial products ranging from rustproof coatings to lubricants.
General Properties and Specifications of Wool Fat or Lanolin or Wool Yolk or Wool Wax or Sheep Grease:
Appearance: Translucent, pale yellow, soft tenacious solid.
Odor: Slight characteristic odor or practically odorless.
Relative Density: about 0.935
Melting Point: 38C to 42C literature.
Flash Point: 113C.
Solubility: Practically insoluble in water. Sparingly soluble in cold alcohol and more in hot alcohol. Freely soluble in chloroform, ether.
Lanolin USP Grade Specifications:
DEFINITION
Lanolin is the purified, wax-like substance from the wool of sheep, Ovis aries L. (Fam. Bovidae), that has been cleaned, decolorized, and deodorized. It contains NMT 0.25% of water. It may contain NMT 0.02% of a suitable antioxidant.
IMPURITIES
Residue on Ignition: NMT 0.1%
Chloride and Sulfate, Chloride: To pass the test. --- 0.035%
Foreign Substances: To pass the test.
Melting Range or Temperature:
Analysis: Determine on a sample previously cooled to 8C to 10C.
Acceptance criteria: 38C to 44C.
Fats and Fixed Oils, Acid Value (Free Fatty Acids):
Sample: 10.0 g. Acceptance criteria: The free acids obtained from the Sample require NMT 2.0 mL of 0.10 N sodium hydroxide for neutralization.
Fats and Fixed Oils, Iodine Value:
Sample: 780–820 mg.
Acceptance criteria: 18–36
Alkalinity:
Sample: 2.0 g.
Analysis: Dissolve the Sample in 10 mL of ether and add 2 drops of phenolphthalein TS.
Acceptance criteria: The liquid is not colored red.
Water-Soluble Acids and Alkalies:
Sample: 10.0 g.
Analysis: Warm the Sample with 50 mL of water on a steam bath, constantly stirring the mixture until the Lanolin is melted.
Acceptance criteria: The fat separates completely on cooling, leaving the water layer nearly clear and neutral to litmus. Retain the water layer for the test for Water-Soluble Oxidizable Substances and Ammonia.
Water-Soluble Oxidizable Substances:
Sample solution: 10 mL of the solution from Water-Soluble Acids and Alkalies.
Analysis: Add the Sample solution to 50 µL of 0.10 N potassium permanganate.
Acceptance criteria: The resulting solution does not completely decolorize within 10 min.
Ammonia:
Sample solution: 10 mL of the solution from Water-Soluble Acids and Alkalies.
Analysis: Add 1 mL of 1 N sodium hydroxide to the Sample solution, and boil.
Acceptance criteria: The vapors do not turn red litmus to blue.
Water Determination:
Acceptance criteria: NMT 0.25%
Petrolatum:
Sample: 3 g.
Analysis: Heat the Sample on a steam bath, with frequent stirring, until its weight loss is NLT its water content. Boil 40 mL of dehydrated alcohol with 500 mg of the dried lanolin so obtained.
Acceptance criteria: The solution is clear or NMT opalescent.
Packaging and Storage: Preserve in well-closed containers, preferably at controlled room temperature.
Wool Fat BP Ph Eur Grade Specifications:
Anhydrous Lanolin
DEFINITION
Purified, anhydrous, waxy substance obtained from the wool of sheep (Ovis aries). A suitable antioxidant may be added.
CHARACTERS
Appearance: Yellow, unctuous substance. When melted, it is a clear or almost clear, yellow liquid. A solution in light petroleum is opalescent.
Solubility: Practically insoluble in water, slightly soluble in boiling anhydrous ethanol.
Characteristic odour.
IDENTIFICATION
A. In a test-tube, dissolve 0.5 g in 5 mL of methylene chloride and add 1 mL of acetic anhydride and 0.1 mL of sulfuric acid. A green colour develops.
B. Dissolve 50 mg in 5 mL of methylene chloride, add 5 mL of sulfuric acid and shake. A red colour develops and an intense green fluorescence appears in the lower layer when examined in daylight, with illumination from behind the observer.
TESTS
Water-soluble acid or alkaline substances: To pass the test.
Water-absorption capacity: To pass the test.
Acid value: Maximum 1.0, determined on 5.0 g dissolved in 25 mL of the prescribed mixture of solvents.
Peroxide value: Maximum 20.
Saponification value: 90 to 105, determined on 2.00 g while heating under reflux for 4 h.
Water-soluble oxidisable substances: To pass the test.
Paraffins: Maximum 1.0 per cent.
Pesticide residues: To pass the test. Maximum 0.05 ppm for each organochlorine pesticide, 0.5 ppm for each other pesticide and 1 ppm for the sum of all the pesticides.
Isolation of the pesticide residues: To pass the test.
Identification and quantification of the pesticide residues: To pass the test.
Chlorides: Maximum 150 ppm.
Loss on drying: Maximum 0.5 per cent, determined on 1.000 g by drying in an oven at 105C for 1 h.
Sulfated ash: Maximum 0.15 per cent.
Storage: At a temperature not exceeding 25C.
We also supply Wool Fat EP Grade.
Lanolin, Anhydrous FCC Food Grade Specifications:
Wool Fat
INS: 913 CAS 8006-54-0
DESCRIPTION
Lanolin, Anhydrous, occurs as a purified, yellow-white, semisolid, fatlike substance. It is extracted from the wool of sheep. It is insoluble in water, but mixes with about twice its weight of water without separation. It is soluble in chloroform and in ether.
Function: Masticatory substance in chewing gum base.
REQUIREMENTS
Acid Value: Not more than 1.12.
Iodine Value: Between 18 and 36.
Lead: Not more than 3 mg/kg.
Loss on Heating: Not more than 0.5%.
Melting Range: Between 36C and 42C.
For Original Monographs of IP Indian Pharmacopoeia EP Ph Eur European Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
30 October, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Lanolin Wool Yolk or Wool Wax or Sheep Grease SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 30-Oct-24
1. Product Identification
Product Name & Other Names: Lanolin Wool Yolk or Wool Wax or Sheep Grease.
CAS No.: 8006-54-0
EINECS EC Number: 232-348-6
Relevant uses and uses advised against (if any): Industrial use only.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a comfortable position for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Lanolin Wool Yolk or Wool Wax or Sheep Grease.
CAS No.: 8006-54-0
EINECS EC Number: 232-348-6
4. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wash affected areas with soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reusing. Thoroughly clean shoes before reusing them. Get medical attention if symptoms occur.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard. It is flammable at higher temperatures. This material may burn but will not ignite readily.
Explosion: Reactions with incompatibles may pose an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire. Avoid solid water jet as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment, cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove it into an approved disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep the container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original containers. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing materials.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Translucent, pale yellow, soft tenacious solid.
Odor: Slight characteristic odor or practically odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.935
Boiling Point: Not available..
Melting Point: 38C to 42C literature.
Flash point: 113C literature.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Practically insoluble in water. Sparingly soluble in cold alcohol and more in hot alcohol. Freely soluble in chloroform, ether.
Viscosity: Not available.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It decomposes upon heating and forms carbon oxides along with fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents and acids.
11. Toxicological Information
Oral rat LD50: NA.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: NA.
Persistence and Degradability: Expected to degrade.
Mobility: No information available.
Bioaccumulation/ Accumulation: Bioaccumulation is not expected.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Follow standard disposal procedures. Dispose of containers or unused contents in accordance with legal requirements.
14. Transport Information
DOT USA: Not dangerous goods.
IMDG: Not dangerous goods.
IATA: Not dangerous goods.
ADT/RID Europe: Not dangerous goods.
15. Regulatory Information
USA Regulations:
Section 313: No chemicals are reportable under Section 313.
California Proposition 65: This product contains no chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************