Hexylene glycol or (±)-2-Methyl-2,4-pentanediol USP NF Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Glutaraldehyde, Hexylene glycol or (±)-2-Methyl-2,4-pentanediol, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD: CAS Number: 107-41-5, EINECS EC Number: 203-489-0, Molecular Formula: C6H14O2 or CH3CH(OH)CH2C(CH3)2OH, Molecular Weight: 118.17, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD Manufacturers
Hexylene glycol
HGL or (±)-2-Methyl-2,4-pentanediol or MPD Pure Suppliers
Hexylene glycol or (±)-2-Methyl-2,4-pentanediol or MPD is mainly used as a surfactant or emulsifying agent and in Skin care products. Hexylene Glycol has a low evaporation rate and it is completely miscible with water. it is used in skin care, hair care, soap, and eye cosmetic products at concentrations ranging from 0.1% - 25%.
General Properties and Specifications of Hexylene glycol or (±)-2-Methyl-2,4-pentanediol or MPD:
Appearance: Oily colorless liquid.
Odor: Mild sweet.
Purity: 99.5%
Relative density: 0.920 – 0.923 @ 20C.
Melting point: -40C.
Boiling point: 197.5C at 1013 Pa
Flash point: 97C (closed cup)
Solubility: Completely miscible in water. It is hygroscopic.
Specifications of Hexylene Glycol USP NF Grade:
C6H14O2 --- 118.17
2,4-Pentanediol, 2-methyl-;
2-Methyl-2,4-pentanediol --- CAS 107-41-5.
DEFINITION
Hexylene Glycol is 2-methyl-2,4-pentanediol.
IDENTIFICATION
A. Infrared Absorption
Acceptance criteria: Meets the requirements
Refractive Index: 1.424–1.430
Acidity:
Sample: 10 mL
Analysis: Mix 1 mL of phenolphthalein with 50 mL of water, and add 0.1 N sodium hydroxide until the solution remains pink for 30 s. Add the Sample, and titrate with 0.10 N sodium hydroxide until the original pink color returns and remains for 30 s.
Acceptance criteria: NMT 0.20 mL of 0.10 N sodium hydroxide is required.
Water Determination: NMT 0.5%
Packaging and Storage: Preserve in tight containers.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We manufacture and supply as under:
Ethylene glycol monoethyl ether
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
26 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product Name & Other Names: Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD
CAS No.: 107-41-5
EINECS EC Number: 203-489-0
Molecular Formula: C6H14O2 or CH3CH(OH)CH2C(CH3)2OH
Molecular Weight: 118.17
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin irritation Category 2
Serious eye damage/eye irritation Category 2A
Labelling according Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Warning
Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Precautionary statements:
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P362: Take off contaminated clothing and wash before reuse.
Labelling in accordance with Directive 67/548/EEC:
Hazard Symbol:
Xi: Irritant
Risk Phrases:
R36/38 Irritating to eyes and skin.
3. Composition/Information on Ingredients
Product Name & Other Names: Hexylene glycol or HGL or (±)-2-Methyl-2,4-pentanediol or MPD
CAS No.: 107-41-5
EINECS EC Number: 203-489-0
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Hazardous decomposition products formed under fire conditions: Carbon oxides and fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Avoid generation of dust during clean-up of spills. Use a soft bristle brush or conductive rubber or conductive plastic shovel. Use caution, material is sensitive to initiation from sources such as heat, flame, shock, friction, or sparks. Use only non-sparking tools.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Pick up or sweep and place in suitable disposal container. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements, or confined areas; dike if needed. Eliminate all ignition sources.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizers and strong reducing agents. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Containers may be hazardous when empty. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Hygroscopic
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: ACGIH TWA 25 ppm (Vapor fraction); ACGIH STEL 50 ppm (Vapor fraction).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Oily colorless liquid.
Odor: Mild sweet.
Odor threshold: Not available.
pH: Not available.
Relative density: 0.920 – 0.923 @ 20C.
Boiling Point: 197.5C at 1013 Pa.
Melting Point: -40C.
Flash point: 97C (closed cup).
Auto-ignition Temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor Density (Air=1): 5.23
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Completely miscible in water. It is hygroscopic.
Viscosity: Not available.
Molecular Formula: C6H14O2 or CH3CH(OH)CH2C(CH3)2OH
Molecular Weight: 118.17
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide along with fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents and strong reducing agents.
Conditions to Avoid: Direct sunlight and moisture. Extremely high or low temperatures, heat, and incompatibles.
11. Toxicological Information
LD50 oral rat: 3700 mg/kg
LD50 oral rabbit: 3200 mg/kg
LD50 dermal rabbit: 7892 mg/kg
Carcinogenicity: Not know or anticipated to be a carcinogen by OSHA, ACGIH, NTP or IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Teratogenicity: no data available
12. Ecological Information
Toxicity to fish: flow-through test LC50 - Gambusia affinis (Mosquito fish) - 8.510 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 5.410 mg/l - 48 h.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with legal requirements.
14. Transport Information
DOT (USA) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
15. Regulatory Information
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: Does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard as per section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
Hazard Symbol:
Xi: Irritant
Risk Phrases:
R36/38 Irritating to eyes and skin.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************