EDTA Edetic Acid BP Edetic Acid USP Manufacturers |
Supplier, Manufacturer, Exporter of EDTA Edetic Acid USP Edetic Acid, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
EDTA, Editic Acid CAS Number 60-00-4, EINECS EC Number 200-449-4, HS code 292121**, Molecular Weight 292.2, Chemical Formula C10H16N2O8
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for EDTA, Editic Acid.
Buy Edetic Acid - EDTA; Door Delivery
For MSDS Sheet Click MSDS EDTA, Ethylene Diamine Tetra Acetic Acid Manufacturers
Edetic Acid
EDTA; Ethylene dinitrilo tetra acetic acid; Ethylene diamine tetra acetic acid
IP BP Ph. Eur. USP Analytical Reagent FCC Food Grades Suppliers
Edetic Acid BP EDTA
C10H16N2O8 -- 292.2 -- 60-00-4
Edetic Acid EDTA
Action and use
Chelating agent; pharmaceutical aid.
DEFINITION
(Ethylenedinitrilo)tetraacetic acid.
Content
98.0 per cent to 101.0 per cent. (EDTA)
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Practically insoluble in water and in ethanol (96 per cent). It dissolves in dilute solutions of alkali hydroxides.
IDENTIFICATION
First identification: A.
Second identification: B, C.
A. Infrared absorption spectrophotometry as per prescribed method.
B. To 5 ml of water add 0.1 ml of ammonium thiocyanate solution and 0.1 ml of ferric chloride solution and mix. The solution is red. Add 0.5 ml of solution S (see Tests). The solution becomes yellowish.
C. To 10 ml of solution S add 0.5 ml of calcium chloride solution. Make alkaline to red litmus paper by the addition of dilute ammonia and add 3 ml of ammonium oxalate solution. No precipitate is formed.
TESTS
Solution S
Dissolve 5.0 g in 20 ml of dilute sodium hydroxide solution and dilute to 100 ml with water.
Appearance of solution
Solution S is clear and colourless.
Impurity A
Liquid chromatography. Carry out the test protected from light. As per Monograph
—impurity A: not more than the area of the corresponding peak in the chromatogram obtained with the reference solution (0.1 per cent).
Chlorides
Maximum 200 ppm.
Iron
Maximum 80 ppm.
Heavy metals
Maximum 20 ppm.
Sulphated ash
Maximum 0.2 per cent, determined on 1.0 g.
Edetic Acid USP
Edetic Acid USP
EDTA
C10H16N2O8 292.24
Glycine, N,N′-1,2-ethanediylbis[N-(carboxymethyl)-.
(Ethylenedinitrilo)tetraacetic acid [60-00-4].
Edetic Acid contains not less than 98.0 percent and not more than 100.5 percent of C10H16N2O8.
Identification: Infrared Absorption 197K.
Residue on ignition: not more than 0.2%.
Heavy metals: 0.003%.
Iron— Char 3.0 g thoroughly, and heat in an oven at 500 until most of the carbon is consumed. Cool, add 0.15 mL of nitric acid, and heat at 500 until all of the carbon is consumed. Dissolve the residue in 2 mL of a mixture of equal volumes of hydrochloric acid and water, digest in a covered dish on a steam bath for 10 minutes, remove the cover, and evaporate to dryness. Dissolve the residue in 1 mL of 1 N acetic acid and 20 mL of hot water, digest for 5 minutes on a steam bath, cool, and dilute with water to 30 mL. To 2.0 mL of this solution add 2 mL of hydrochloric acid, and dilute with water to 50 mL. Add about 50 mg of ammonium persulfate and 3 mL of ammonium thiocyanate solution (3 in 10), mix, and transfer to a color-comparison tube. Treat in the same manner 2.0 mL of a solution of ferric ammonium sulfate, prepared by dissolving 43.2 mg of ferric ammonium sulfate in 10 mL of 2 N sulfuric acid and adding water to make 1000 mL, each mL representing 5 :g of Fe. The color of the test solution is not deeper than that of the solution containing the standard iron solution (0.005%).
Limit of nitrilotriacetic acid— To pass the test.
We manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
24 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again