Glycerol Monostearate BP Ph Eur EP Grade Manufacturers, with SDS GHS MSDS Sheet, Glycerol Monostearate SE Self Emulsifying and Glycerol Monostearate NSE Non Seff Emulsifying
Supplier, Manufacturer, Exporter of Glycerol Monostearate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself
Search our website here:
Glycerol Monostearate: CAS Number: 31566-31-1, EINECS EC Number: 250-705-4, Molecular Formula: C21H42O4 , Molecular Weight: 358.56, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Glycerol Monostearate.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Glycerol Monostearate Manufacturers
SE Self Emulsifying and Glycerol Monostearate NSE Non Seff Emulsifying Pure BP Ph Eur EP Suppliers
Glycerol monostearate, commonly known as GMS, is an monoglyceride commonly used as an emulsifier in foods. It is a white, odorless, and sweet-tasting flaky hygroscopic powder.
Glyceryl monostearate SE or GMS-SE or Glyceryl Monostearate Self Emulsifying is is the monoester of glycerin and stearic acid and is of vegetable orign. It is able to self emulsify as it contains a small amount (3-6%) of potassium stearate or sodium stearate.
As it has a relatively low HLB value (5.8) it is useful for making water-in-oil emulsions. However, it can also be used as a co-emulsifier and thickener for oil-in-water formulations.
Glyceryl Mono Stearate NSE or GMS-NSE or Glyceryl Mono Stearate Non-emulsifying is pharmaceutical aid, emulsifier in food, cosmetic, plastic industry, pharmaceutical preparations as water in oil emulsifier, Opacifier, emollients and bodyfying agents, used in vanishing creams, cleansing creams, PVC , PP, and PE plastics as lubricant and anti-state crystal clear polystyrene and anti-fogging aid
Glycerol Monostearate 40-55 BP Ph Eur Grade
Ph Eur --- CAS 31566-31-1
Action and use: Excipient.
Mixture of monoacylglycerols, mainly monostearoylglycerol, together with variable quantities of di- and triacylglycerols. It is obtained by partial glycerolysis of vegetable oils mainly containing triacylglycerols of palmitic (hexadecanoic) or stearic (octadecanoic) acid or by esterification of glycerol with stearic acid. The fatty acids may be of vegetable or animal origin.
monoacylglycerols: 40.0 per cent to 55.0 per cent;
diacylglycerols: 30.0 per cent to 45.0 per cent;
triacylglycerols: 5.0 per cent to 15.0 per cent.
Appearance: Hard, waxy mass or unctuous powder or flakes, white or almost white.
Solubility: Practically insoluble in water, soluble in ethanol (96 per cent) at 60 °C.
First identificationıC, D.
Second identificationıA, B.
A. Melting point: 54C to 66C.
Introduce the melted substance into the capillary tubes and allow to stand for 24 h in a well-closed container.
B. Thin-layer chromatography: To pass the test.
C. Composition of fatty acids (see Tests) according to the type stated on the label.
D. It complies with the limits of the assay (monoacylglycerol content).
Acid value: Maximum 3.0, determined on 1.0 g.
Use a mixture of equal volumes of ethanol (96 per cent) R and toluene R as solvent and heat gently.
Iodine value: Maximum 3.0.
Saponification value: 158 to 177, determined on 2.0 g. Carry out the titration with heating.
Free glycerol: Maximum 6.0 per cent.
Composition of the fatty-acid fraction of the substance:
Glycerol Monostearate Type I: Stearic Acid is 40-60% and sum of contents of palmic and stearic acids is minimum 90%.
Glycerol Monostearate Type II: Stearic Acid is 60-80% and sum of contents of palmic and stearic acids is minimum 90%.
Glycerol Monostearate Type III: Stearic Acid is 80-99% and sum of contents of palmic and stearic acids is minimum 96%.
Nickel: Maximum 1 ppm.
Water: Maximum 1.0 per cent, determined on 1.00 g. Use pyridine R as the solvent and heat gently.
Total ash: Maximum 0.1 per cent.
Size-exclusion chromatography: To pass the test.
The label states the type of glycerol monostearate 40-55.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We manufacture and supply as under:
Ethylene Glycol Monostearate
Ethylene Glycol Distearate.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
USA, Canada, Mexico and other American
neighbouring buyers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 26 August, 2022
List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Carbonate Ammonium Chloride Ammonium Persulfate Borax; Sodium Borate Boric Acid Calcium Chloride Calcium Saccharate Calcium Sulfate Carbamide Peroxide Chromic Chloride Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Glacial Acetic Acid Lactobionic Acid Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Bromide Potassium Chloride Potassium Hydroxide Pellets Potassium Nitrate Propylene Carbonate Potassium Monopersulfate Selenious acid Sodium Acetate Sodium Bromate Sodium Diacetate Sodium Formaldehyde Bisulfite Sodium Lactobionate Sodium Thiosulfate Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Glycerol Monostearate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 22-Oct-20
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Glycerol monostearate.
CAS Number: 31566-31-1
EINECS EC Code: 250-705-4
Molecular Formula: C21H42O4
Molecular Weight: 358.56
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS and Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: Glycerol monostearate.
CAS Number: 31566-31-1
EINECS EC Code: 250-705-4
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Products of Combustion: Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Contain spilled material. Do not inhale dust, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as pe law.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids. Sensitive to light.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid off-white powder.
Odor: Fatty odor.
Odor threshold: Not available.
pH: Not available.
Relative density: 0.9 to 0.915
Melting point: 54 - 66C
Initial boiling point and boiling range: Not available.
Flash point: 204C - closed cup
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in water.
Viscosity: Not available.
Molecular Formula: C21H42O4
Molecular Weight: 358.56
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, Excess heat, light.
Incompatibility with various substances: Avoid high temperatures, sparks, open flames and moisture. Avoid contact with strong oxidizing agents and acids.
Polymerization: Will not occur.
Hazardous decomposition products: Hazardous decomposition products formed under fire conditions.
Section 11: Toxicological Information
LD50 Oral - Rat - 5,000 mg/kg(Stearic acid monoester with glycerol)
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Toxicity to fish: Acute fish toxicity: LC50 >100 mg product/l
Products of Biodegradation: The product itself and its products of degradation are not toxic.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods.
Section 15: Other Regulatory Information
USA Regulations:Section 16 - Additional Information
SARA 302: Not subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.