Sorbitan Trioleate BP Ph Eur USP NF Grade Manufacturers, with SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Sorbitan Trioleate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself Search our website here:
Sorbitan Trioleate: CAS Number: 26266-58-0, EINECS EC Number: 247-569-3, Molecular Formula: C60H108O8, Molecular Weight: 957.49, HS Code 3824 99 92
How big is your requirement or how small
We serve it all.Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Sorbitan Trioleate.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Sorbitan Trioleate ManufacturersSorbitan Trioleate
BP Ph Eur USP NF Grade Pure Suppliers
Sorbitan trioleate is an oil loving surfactant and used for that.
General Properties and Specifications of Sorbitan trioleate:
Appearance: Viscous yellow liquid.
Hydroxyl value: 50 to 75 mg-KOH/gm.
Relative density: about 0.95 to 0.98
Solubility: 5% in ethanol gives clear faint yellow solution.
Sorbitan Trioleate USP NF Grade Specifications:
DEFINITION
Sorbitan Trioleate is the triester of Oleic Acid and Sorbitol and its mono- and dianhydrides. It yields, upon saponification, NLT 85.5% and NMT 90.0% of fatty acids, and NLT 13.0% and NMT 19.0% of polyols (w/w).IDENTIFICATION
A.
Sample: Residue obtained in the Assay for Fatty Acids
Acceptance criteria
Fats and Fixed Oils, Acid Value: 192–204 on 1-g sample
Fats and Fixed Oils, Iodine Value: 75–95
B. Thin-Layer Chromatographic Identification Test: To pass the test.ASSAY
Fatty Acids:
Sample: 8.6 g
Analysis: Transfer the Sample to a 500-mL conical flask. Cautiously add 100 mL of alcohol and 3.5 g of potassium hydroxide, then add a few glass beads, and mix. Connect a suitable condenser to the flask, reflux the mixture on a hot plate for 2 h, add 100 mL of water, and heat on a steam bath to evaporate the alcohol, adding water occasionally to replace the alcohol. Continue the evaporation until the odor of alcohol can no longer be detected, and transfer the saponification mixture, with the aid of 100 mL of hot water, to a 500-mL separator. Using extreme caution, neutralize to litmus paper with a mixture of equal volumes of sulfuric acid and water, noting the volume used, and add a 10% excess of the dilute acid. Allow the solution to cool. If salts appear, add sufficient water to produce a clear solution. Cautiously add 100 mL of solvent hexane, shake thoroughly, and withdraw the lower layer into a second 500-mL separator. Similarly extract with two more 100-mL portions of solvent hexane. Extract the combined hexane layers with 50-mL portions of water until neutral to litmus paper. Combine the extracts with the original aqueous phase to use for the Assay for Polyols. Evaporate the solvent hexane in a tared beaker on a steam bath nearly to dryness, dry under vacuum at 60° for 1 h, cool in a desiccator, and weigh the fatty acids.
Acceptance criteria: 85.5%–90.0%
Polyols: To pass the test.
Acceptance criteria: 13.0%–19.0% (w/w)
Water Determination: NMT 0.7%
Fats and Fixed Oils, Acid Value: NMT 17
Fats and Fixed Oils, Hydroxyl Value: 50–75
Fats and Fixed Oils Iodine Value: 77–85
Fats and Fixed Oils, Saponification Value: 169–183
Packaging and Storage: Preserve in tight containers.
Sorbitan Trioleate BP Ph Eur Grade Specifications:
Action and use: Non-ionic surfactant.DEFINITION
Mixture usually obtained by esterification of 1 mole of sorbitol and its mono-anhydride per 3 moles of oleic ((9Z)-octadec-9-enoic) acid. A suitable antioxidant may be added.CHARACTERS
Appearance: Pale yellow, light yellowish or brown solid, which becomes a viscous, oily, brownish-yellow liquid at about 25C.
Solubility: Practically insoluble but dispersible in water, soluble in fatty oils, slightly soluble in ethanol (96 per cent).
Relative density: About 0.98.IDENTIFICATION
A Hydroxyl value (see Tests).
B. Iodine value (see Tests).
C. Composition of fatty acids (see Tests).
Margaric acid& Maximum 0.2 per cent for oleic acid of vegetable origin and maximum 4.0 per cent for oleic acid of animal origin.TESTS
STORAGE
Acid value: Maximum 16.0, determined on 5.0 g.
Hydroxyl value: 55 to 75
Iodine value: 76 to 90
Peroxide value: Maximum 10
Saponification value: 170 to 190
Composition of fatty acids by Gas chromatography:
Composition of the fatty acid fraction of the substance:
— myristic acid: maximum 5.0 per cent;
— palmitic acid: maximum 16.0 per cent;
— palmitoleic acid: maximum 8.0 per cent;
— stearic acid: maximum 6.0 per cent;
— oleic acid: 65.0 per cent to 88.0 per cent;
— linoleic acid: maximum 18.0 per cent;
— linolenic acid: maximum 4.0 per cent;
— fatty acids with chain length greater than C18: maximum 4.0 per cent.
Water: Maximum 1.5 per cent, determined on 1.00 g.
Total ash: Maximum 0.5 per cent, determined on 1.5 g.
Protected from light.For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 16 May, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Sorbitan Trioleate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 20-Jun-211. PRODUCT DESCRIPTION
Product Name & Other Names: Sorbitan Trioleate.
CAS Number: 26266-58-0
EINECS EC Number: 247-569-3
Molecular Weight: 957.49
Molecular Formula: C60H108O8
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
NoneSignal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: Sorbitan Trioleate.
CAS Number: 26266-58-0
EINECS EC Number: 247-569-34. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.5. FIREFIGHTING PROCEDURES
Extinguisher Media: Water spray. Carbon dioxide (CO2). Dry chemical. alcohol-resistant foam.
Flammable Limits in Air % by Volume: N/A
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuuming or wet sweeping may be used to avoid dust dispersal and then remove to an approved disposal container.7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust/mist generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cold, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing and bases.8. SPECIAL PROTECTION INFORMATION
Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.9. PHYSICAL DATA
Appearance and Odor: Viscous yellow liquid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.95 to 0.98
Melting point/freezing point: -14C literature.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): 5% in ethanol gives clear faint yellow solution.
Viscosity: Not available.
Molecular Weight: 957.49
Molecular Formula: C60H108O810. REACTIVITY DATA
Stability: Stable under normal conditions.
Conditions to Avoid: Heat.
Incompatibility (Materials to Avoid): Strong oxidizing and bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur.11. TOXICITY DATA
LD50 Oral – Rat: LD50 Oral Rat: > 39.800 mg/kg.
Carcinogenicity: No product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.12. ECOLOGICAL DATA
Toxicity: Avoid release into the environment.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable Federal, State and Local regulations.
14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA: Not regulated.15. REGULATORY INFORMATION
USA:
16. ADDITIONAL INFORMATION
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************