Sodium Hexametaphosphate or Sodium Polyphosphate FCC Food Grade Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Sodium Hexametaphosphate or Sodium Polyphosphate FCC Food Grade, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Sodium Hexametaphosphate or Sodium Polyphosphate CAS Number 68915-31-1 or 10361-03-2 or 10124-56-8, EINECS EC Number: 233-343-1 or 272-808-3 or 688-275-9, Molecular Formula: Na6[(PO3)6] mainly, Molecular Weight: 611.77, HS Code 28252940 or 28353900
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Sodium Hexametaphosphate or Sodium Polyphosphate.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Sodium Hexametaphosphate or Sodium Polyphosphate Manufacturers
Sodium Hexametaphosphate or Sodium Polyphosphate
Pure FCC Food Grade Suppliers
Sodium Hexametaphosphate is used as a sequestrant and has applications within a wide variety of industries, including as a food additive in which it is used under the E number E452i. As a food additive, it is used as an emulsifier.
General Properties and Specifications of Sodium Hexametaphosphate or Sodium Polyphosphate:
Appearance: White, transparent platelets, granules, or powders.
Odor: Odorless.
Relative Density: about 2.5
Melting Point: 628C literature.
Boiling Point: 1500C literature.
Solubility: Soluble in water.
Storage: Ambient.
Sodium Polyphosphates or Glassy or Sodium Hexametaphosphate or Sodium Tetrapolyphosphate or Graham’s Salt FCC Food Grade:
INS: 452(i) CAS 68915-31-1 or CAS 10361-03-2
DESCRIPTION
Sodium Polyphosphates, Glassy, occur as colorless or white, transparent platelets, granules, or powders. They belong to a class consisting of several amorphous, water-soluble polyphosphates composed of linear chains of metaphosphate units (NaPO3)x for which x ≥ 2, terminated by Na2PO4— groups. They are usually identified by their Na2O/P2O5 ratio or their P2O5 content. The Na2O/P2O5 ratios vary from about 1.3 for sodium tetrapolyphosphate, for which x = approximately 4; through about 1.1 for Graham’s salt, commonly called sodium hexametaphosphate, for which x = 13 to 18; to about 1.0 for the higher molecular weight sodium polyphosphates, for which x = 20 to 100 or more. Glassy Sodium Polyphosphates are very soluble in water. The pH of their solutions varies from about 3.0 to 9.0
Function: Emulsifier; sequestrant; texturizer.
REQUIREMENTS
Identification:
A. A 1:20 aqueous solution gives positive tests for Sodium,
B. Dissolve about 100 mg of sample in 5 mL of hot 1.7 N nitric acid, warm on a steam bath for 10 min, and cool. Neutralize to litmus paper with 1 N sodium hydroxide and add silver nitrate. A yellow precipitate forms that is soluble in 1.7 N nitric acid.
Assay: Between 60.0% and 71.0% of P2O5.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.1%.
Lead: Not more than 4 mg/kg.
For Original Monographs of IP Indian Pharmacopoeia EP Ph Eur European Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Sodium Hexametaphosphate or Sodium Polyphosphate
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
2 September, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Sodium Hexametaphosphate or Sodium Polyphosphate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 02-Sep-24
1. Product Identification
Product Name & Other Names: Sodium Hexametaphosphate or Sodium Polyphosphate.
CAS No.: 68915-31-1 or 10361-03-2 or 10124-56-8.
EINECS EC Number: 233-343-1 or 272-808-3 or 688-275-9
Molecular Weight: 611.77
Chemical Formula: Na6[(PO3)6] mainly.
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Sodium Hexametaphosphate or Sodium Polyphosphate.
CAS No.: 68915-31-1 or 10361-03-2 or 10124-56-8.
EINECS EC Number: 233-343-1 or 272-808-3 or 688-275-9
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. No limitation of firefighting method is specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating as per law.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Storage: Ambient.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established for Monosodium Phosphate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the dust or mist of Monosodium Phosphate is apparent, a half-face dust/mist respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: White, transparent platelets, granules, or powders.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: about 2.5
Melting point/freezing point: 628C literature.
Boiling Point: 1500C literature.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.
Molecular Weight: 611.77
Chemical Formula: Na6[(PO3)6] mainly.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. Slightly hygroscopic.
Hazardous Decomposition Products: Phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
11. Toxicological Information
Anhydrous: Oral Rat LD50: 3053 mg/kg.
LD50 Dermal Rabbit: >7940 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to Fish: Not available.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Mono Sodium Phosphate container and unused contents in accordance with federal, state, and local requirements.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IATA/ICAO: Not regulated.
IMDG/IMO: Not regulated.
15. Regulatory Information
USA -TSCA Inventory: 7558-80-7 Anhydrous is listed.
SARA 311/312: See section 2.
SARA 313: Not applicable
California Proposition 65: This product does not contain any Proposition 65 chemicals.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************