Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate Manufacturers, with SDS GHS MSDS Sheet
Supplier, Manufacturer, Exporter of Sodium Dodecyl Benzenesulfonate or Sodium Dodecylbenzene Sulphonate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself Search our website here:
Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate: CAS Number: 25155-30-0, EINECS EC Number: 246-680-4, Molecular Formula: CH3(CH2)11C6H4SO3Na or C18H29NaO3S, Molecular Weight: 348.48, HS Code ---**
How big is your requirement or how small
We serve it all.Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulfonate ManufacturersSodium Dodecylbenzene Sulphonate
Sodium Dodecyl Benzenesulphonate or SDBS Pure Suppliers
SDBS or sodium dodecyl benzene sulfonate, white or beige powder or flake solid. It is commonly used as an anionic surfactant. As a kind of anionic surfactant, sodium dodecyl benzene sulfonate has good surface activity and strong hydrophilicity. It effectively reduces the tension of oil and water surface to emulsification. It is used in several industrial applications.
Specifications of Sodium Dodecyl Benzene Sulfonate or Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate:
Appearance: Off White to Beige Powder or Flakes
Purity(Gravimetric Method): 95.0 to 105.0 %(calcd.on dried substance)
Loss on drying: 5.0% maximum
pH: 5.5 to 10.5(10g/L, 25 deg-C)
Petroleum ether soluble matter:2.0% maximum
Ethanol insoluble matter: 6.0% maximum.Sodium Dodecyl Benzene Sulphonate or Sodium Dodecyl Benzenesulphonate or SDBS or Sodium Dodecylbenzene Sulfonate is also available in liquid form and other assays.
We manufacture and supply as under:
Decyltrimethylammonium Bromide
Heptanesulfonic Acid Sodium Salt
Lauric Acid or Dodecanoic acid
n-Dodecyl-beta-Maltopyranoside
Octanesulfonic Acid Sodium Salt Anhydrous
Triethanolamine Lauryl Sulfate.
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 15 December, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Sodium Dodecyl Benzenesulfonate or SDBS SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 17-Nov-20SECTION 1. PRODUCT IDENTIFICATION
Product Name & Other Names: Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate
CAS Number: 25155-30-0
EINECS EC Number: 246-680-4
Molecular Formula: CH3(CH2)11C6H4SO3Na or C18H29NaO3S
Molecular Weight: 348.48
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per the letterhead.SECTION 2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Acute toxicity, oral (Category 4) H302
Skin corrosion/irritation (Category 2) H315
Serious eye damage (Category 1) H318
Specific target organ toxicity, single exposure; Respiratory tract irritation (Category 3) H335Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
CorrosiveSignal Words: Danger
Hazard statements:
H302: Harmful if swallowed
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P501: Dispose of contents/ container to an approved waste disposal plant.Classification according to European Directive 67/548/EEC as amended:
Hazard symbols:
Xn Harmful
C Corrosive
R-phrases:
R22 Harmful if swallowed.
R37 Irritating to respiratory system.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Product Name & Other Names: Sodium Dodecyl Benzenesulfonate or SDBS or Sodium Dodecylbenzene Sulphonate
CAS Number: 25155-30-0
EINECS EC Number: 246-680-4SECTION 4. FIRST AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.SECTION 5. FIRE FIGHTING MEASURES
Flash Point: 170C
Fire and Explosion Hazards: Will burn on heating.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Apart from oxides of carbon. toxic fumes of sulfur dioxide and undefined fumes may result from combustion. Closed containers may explode from heat of a fire. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face piece mask. Do not use water directly on material. Do not allow water run-off to enter sewers or watercourses. Use water spray to cool unopened containers.SECTION 6. ACCIDENTAL RELEASE MEASURES
Procedures for Cleanup: Stop release if possible to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: Contamination of soil and water should be prevented. Keep spillage and runoff from storage areas from entering soil, streams or sewers.SECTION 7. HANDLING AND STORAGE
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge. Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. generating dust and the release of dust into the workplace. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Do not store with incompatible materials like oxidizing agentsSECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies.
Respirators: Where dust or fumes are generated and cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH-approved respiratory protection equipment (a 42CFR84 Class N, R or P-95 particulate filter cartridge).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Off White to Beige Powder or Flakes. Solid.
Odor: Odorless.
Odor threshold: Not available.
pH: 5.5 to 10.5 @ 10% solution.
Relative density: around 1.
Melting point/freezing point: 204C.
Initial boiling point and boiling range: Not available.
Flash point: 170C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.
Molecular Formula: CH3(CH2)11C6H4SO3Na or C18H29NaO3S
Molecular Weight: 348.48SECTION 10. STABILITY AND REACTIVITY
Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes. Under such conditions, sulfur dioxide will also be generated and can cause respiratory distress.SECTION 11. TOXICOLOGICAL INFORMATION
Acute Toxicity:
LD50 Oral - Rat - 500 - 2.000 mg/kg.
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.SECTION 12. ECOLOGICAL INFORMATION
Eco toxicological data:
Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 3,2 - 5,6 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 6,3 mg/l - 48 h.
Persistence and Degradability: Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.SECTION 13. DISPOSAL CONSIDERATIONS
Do not wash the material down drain. Put uncontaminated material back into the process if at all possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
SECTION 14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IATA: Not regulated.
IMDG/IMO: Not regulated.SECTION 15. REGULATORY INFORMATION
USA Regulations:
SARA 302 Components: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard, Chronic Health Hazard.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.SECTION 16 - ADDITIONAL INFORMATION
European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbols:
Xn Harmful
C Corrosive
R-phrases:
R22 Harmful if swallowed.
R37 Irritating to respiratory system.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************