Tween - Polysorbate 60 Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Tween - Polysorbate 60, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

---------

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Tween - Polysorbate 60: CAS Number: 9005-67-8, EINECS EC Number: 500-020-4, Molecular Formula: C64H126O26, Molecular Weight: 1,311.70, FEMA Number 2916, HS Code ---**

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Tween - Polysorbate 60.

General Specifications of Polysorbate 60:
Appearance: Semi-solid to Solid Pale Yellow.
Water (by Karl Fischer): Not more than 3.0 %
Residue on ignition (Ash): Not more than 0.25 %
Acid Value: Not more than 2.0 ml
Hydroxyl Value: 81.0 - 96.0
Saponification Value: 45.0 - 55.0
Arsenic (As): Not more than 3 ppm
Cadmium (Cd): Not more than 1 ppm
Mercury (Hg): Not more than 1 ppm
Lead (Pb): Not more than 10 ppm.

Polysorbate 60 BP Ph Eur Grade Specifications
Polyoxyethylene 20 Sorbitan Monostearate
Ph Eur
Action and use: Non-ionic surfactants.

DEFINITION
Mixture of partial esters of fatty acids, mainly Stearic acid 50 (1474), with sorbitol and its anhydrides ethoxylated with approximately 20 moles of ethylene oxide for each mole of sorbitol and sorbitol anhydrides.

CHARACTERS
Appearance: Yellowish-brown gelatinous mass which becomes a clear liquid at temperatures above 25C.
Solubility: Soluble in water, in ethanol, in ethyl acetate and in methanol, practically insoluble in fatty oils and in liquid paraffin.
Relative density: About 1.10.
Viscosity: about 400 mPa·s at 30C.

IDENTIFICATION
First identication A, D.
Second identification B, C, D, E.
A. Infrared absorption spectrophotometry.
B. It complies with the test for hydroxyl value.
C. It complies with the test for saponification value.
D. It complies with the test for composition of fatty acids.
E. Dissolve 0.1 g in 5 ml of methylene chloride. Add 0.1 g of potassium thiocyanate and 0.1 g of cobalt nitrate. Stir with a glass rod. The solution becomes blue.

TESTS
Acid value: Maximum 2.0.
Hydroxyl value: 81 to 96.
Peroxide value: Maximum 10.0.
Saponification value: 45 to 55, determined on 4.0 g.
Composition of fatty acids:
Composition of the fatty acid fraction of the substance:
stearic acid : 40.0 per cent to 60.0 per cent;
sum of the contents of palmitic and stearic acids: minimum 90.0 per cent.
Ethylene oxide and dioxan: Maximum 1 ppm of ethylene oxide and maximum 10 ppm of dioxan.
Heavy metals: Maximum 10 ppm.
Water: Maximum 3.0 per cent, determined on 1.00 g.
Total ash: Maximum 0.25 per cent, determined on 2.0 g.

Polysorbate 60 USP NF Grade Specifications
Sorbitan, monooctadecanoate, poly(oxy-1,2-ethanediyl) derivs.
Polyoxyethylene 20 sorbitan monostearate [Compound usually contains also associated fatty acids.]
CAS 9005-67-8

Polysorbate 60 is a mixture of stearate and palmitate esters of sorbitol and its anhydrides copolymerized with approximately 20 moles of ethylene oxide for each mole of sorbitol and sorbitol anhydrides.

Identification:
A: It meets the requirements for Identification tests A and C under Polysorbate 80.
B: To 2 mL of a solution (1 in 20) add 0.5 mL of bromine, dropwise: the bromine is not decolorized (distinction from Polysorbate 80).
Hydroxyl value: between 81 and 96.
Saponification value: between 45 and 55.
Other requirements: It meets the requirements for Water, Residue on ignition, Heavy metals, and Acid value under Polysorbate 80.

Polysorbate 60 FCC Food Grade
Polyoxyethylene (20) Sorbitan Monostearate; Sorbitan
Monooctadecanoate; Poly(oxy-1,2-ethanediyl) Derivative
INS: 435 CAS: 9005-67-8

DESCRIPTION
Polysorbate 60 occurs as a yellow to orange colored, oily liquid or semigel. It is a mixture of stearate and palmitate partial esters of sorbitol and sorbitol anhydrides condensed with approximately 20 moles of ethylene oxide (C2H4O) for each mole of sorbitol and its mono- and dianhydrides. It is soluble in water, in aniline, in ethyl acetate, and in toluene, but it is insoluble in mineral oil and in vegetable oils.
Function: Emulsifier; stabilizer.

REQUIREMENTS
Identification:
A. Add 5 mL of 1 N sodium hydroxide to 5 mL of a 1:20 aqueous solution, boil for a few minutes, cool, and acidify with 2.7 N hydrochloric acid. The solution is strongly opalescent.
B. A 60:40 (v/v) mixture of Polysorbate 60:water at 25C or cooler yields a gelatinous mass.
Assay for Oxyethylene Content: Not less than 65.0% and not more than 69.5% of oxyethylene groups (—C2H4O—), equivalent to between 97.0% and 103.0% of Polysorbate 60, calculated on the anhydrous basis.
Acid Value: Not more than 2.
1,4-Dioxane: Not more than 10 mg/kg.
Hydroxyl Value: Between 81 and 96.
Lead: Not more than 2 mg/kg.
Residue on Ignition: Not more than 0.25%.
Saponification Value: Between 45 and 55.
Stearic and Palmitic Acids: Between 21.5 and 26.0 g per 100 g of sample.
Water: Not more than 3.0%.

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Polysorbate 60 SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 13-Nov-20

Product Name & Other Names: Polysorbate 60.
CAS Number: 9005-67-8
EINECS EC Number: 500-020-4
Molecular Weight: 1,311.70
Molecular Formula: C64H126O26
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Polysorbate 60.
CAS Number: 9005-67-8
EINECS EC Number: 500-020-4

Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Polysorbate 60 is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.

Extinguisher Media: Water spray. Carbon dioxide (CO 2). Dry chemical. alcohol-resistant foam.
Flammable Limits in Air % by Volume: N/A
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and bases.

Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. Better keep it under 10 mg/m3
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance and Odor: Viscous yellow liquid material.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.044
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Molecular Weight: 1,311.70
Molecular Formula: C64H126O26

Stability: Polysorbate 60 is stable
Conditions to Avoid: Heat and Strong oxidizing agents.
Incompatibility (Materials to Avoid): Strong oxidizing and bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur.

LD50 Oral - Rat - > 62,640 mg/kg
LD50 Intravenous - Rat - 1,220 mg/kg
Carcinogenicity: No product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish: LC50 - Oryzias latipes - 240 mg/l - 48 h
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Waste Disposal Methods: Dispose Polysorbate 60 in accordance with all applicable Federal, State and Local regulations.

DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA: Not regulated.

USA:
SARA 302 Components: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate	Aluminium Potassium Sulphate
Ammonium Bicarbonate	Ammonium Carbonate
Ammonium Chloride	Ammonium Persulfate
Borax; Sodium Borate	Boric Acid
Calcium Chloride	Calcium Saccharate
Calcium Sulfate	Carbamide Peroxide
Chromic Chloride	Cupric or Copper Chloride
Ferric Chloride Hexahydrate	Fumaric Acid
Glacial Acetic Acid	Lactobionic Acid
Magnesium Chloride	Magnesium Sulfate
Manganese Chloride	Manganese Sulfate
Potassium Bromide	Potassium Chloride
Potassium Hydroxide Pellets	Potassium Nitrate
Propylene Carbonate	Potassium Monopersulfate
Selenious acid	Sodium Acetate
Sodium Bromate	Sodium Diacetate
Sodium Formaldehyde Bisulfite	Sodium Lactobionate
Sodium Thiosulfate	Zinc Chloride