PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether USP NF Grade Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether USP NF Grade, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether CAS Number 9004-74-4, EINECS EC Number: 245-775-8 or 618-349-3, Molecular Formula: Varies, Molecular Weight: Varies, HS Code 39072090 39072990
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether.
For SDS MSDS Sheet Click
SDS MSDS Sheet of PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether Manufacturers
PEG-6 Methyl Ether
Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether USP NF Grade Suppliers
PEG 6 Methyl Ether or Methoxy PEG-6 is used in cosmetics.
General Properties and Specifications of PEG 6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether:
Appearance: It occurs as light-yellow transparent liquid.
pH (1%): 5.0 to 7.0
Hydroxyl value: 140 to 160 mg K0H/g
Water: Not more than 2.0 %
Storage: Room Temperature. (Recommended in a cool and dark place, <15C).
Polyethylene Glycol Monomethyl Ether USP NF Grade Specifications:
Poly(oxy-1,2-ethanediyl), α-methyl-ω-hydroxy-;
Methoxy polyethylene glycol CAS 9004-74-4
DEFINITION
Polyethylene Glycol Monomethyl Ether is an addition polymer of ethylene oxide and methanol, represented as: CH3 (OCH2CH2 )nOH
in which n represents the average number of oxyethylene groups. The average molecular weight is NLT 95.0% and NMT 105.0% of the labeled nominal value if the labeled nominal value is below 1000; it is NLT 90.0% and NMT 110.0% of the labeled nominal value if the labeled nominal value is between 1000 and 4750; and it is NLT 87.5% and NMT 112.5% of the labeled nominal value if the labeled nominal value is above 4750.
Residue on Ignition:
Sample: 25 g of Polyethylene Glycol Monomethyl Ether, moistened with 2 mL of sulfuric acid in a platinum dish
Acceptance criteria: NMT 0.1%
Limit of Ethylene Glycol and Diethylene Glycol: To pass the test.
Free Ethylene Oxide and 1,4-Dioxane: To pass the test.
pH:
Sample solution: 5.0 g of Polyethylene Glycol Monomethyl Ether in 100 mL of carbon dioxide-free water. Add 0.30 mL of saturated potassium chloride solution.
Acceptance criteria: 4.5–7.5
Completeness and Color of Solution:
Sample solution: 5 g of Polyethylene Glycol Monomethyl Ether in 50 mL of water
Acceptance criteria: The resulting solution is colorless and is clear for liquid grades and NMT slightly hazy for solid grades.
Viscosity: Capillary Methods: To meet the requirement.
Packaging and Storage: Preserve in tight containers.
For Original Monographs of IP Indian Pharmacopoeia EP Ph Eur European Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether
Diethylene Glycol Mono Methyl Ether
Ethylene Glycol Monoethyl Ether
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
25 September, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether
SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 05-Aug-24
1. PRODUCT DESCRIPTION
Product Name & Other Names: PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether.
CAS Number: 9004-74-4
EINECS EC Number: 245-775-8 or 618-349-3
Molecular Weight: Varies
Molecular Formula: Varies
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per letterhead.
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS & Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation, if exposed in large quantity.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: PEG-6 Methyl Ether or Methoxy PEG-6 or Polyethylene Glycol Monomethyl Ether.
CAS Number: 9004-74-4
EINECS EC Number: 245-775-8 or 618-349-3
4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If it is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.
5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Flammable Limits in Air % by Volume: N/A
Special hazards arising from the substance or mixture: Carbon oxides and fumes. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container.
7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials oxidizing agents.
8. SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Wash hands after handling.
9. PHYSICAL DATA
Appearance and Odor: It occurs as light-yellow transparent liquid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting Point: - Not available.
Boiling Point: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.
Molecular Weight: Varies
Molecular Formula: Varies.
10. REACTIVITY DATA
Stability: It is stable
Conditions to Avoid: Heat, Dust generation.
Incompatibility (Materials to Avoid): Oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, fumes.
Hazardous Polymerization: Will not occur.
11. TOXICITY DATA
Acute toxicity:
LD50 Oral - Rat - >10000 mg/kg
LD50 Dermal - Rabbit - > 10000 mg/kg
Carcinogenicity: This product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL DATA
Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 10,000 mg/l - 96 h(Methoxypolyethylene glycol).
Bioaccumulative potential: No data available.
Mobility: Likely to be mobile due to water solubility.
Persistence: Unlikely to persist due to water solubility.
Results of PBT and vPvB assessment: No data available for assessment.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable Federal, State and Local regulations.
14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA: Not regulated.
15. REGULATORY INFORMATION
USA:
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: Not listed.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************