Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol Analytical Reagent Grade Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol CAS Number 109-86-4, EINECS EC Number: 203-713-7, Molecular Formula: C3H8O2, Molecular Weight: 76.09, HS Code 29094990 or 29094400

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol Manufacturers

Methyl Cellosolve
2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol Analytical Reagent Grade Suppliers
Methyl Cellosolve or Ethylene Glycol Monomethyl Ether

Methyl Cellosolve or 2-Methoxyethanol or Ethylene Glycol Monomethyl Ether is an organic compound with formula that is used mainly as a solvent.

General Properties and Specifications of Methyl Cellosolve or 2-Methoxyethanol or Ethylene Glycol Monomethyl Ether or Methyl Glycol:
Appearance: Clear colourless liquid.
Odor: Ether-like.
Color (APHA): 10 maximum.
Assay (GC): 99.5% minimum.
Relative density: 0.963-0.965 @ 20C.
Refractive Index @ 20°C: 1.401-1.403
Boiling Range: 124C to125C.
Non-Volatile Matter: 0.003% maximum.
Acidity (CH3COOH): 0.002% maximum.
Substance Discoloured by H2SO4: Passes test.
Iron (Fe): 0.00002% maximum.
Heavy Metals (Pb): 0.00005% maximum.
Aldehydes & Ketones (CH3CHO): 0.002% maximum.
Peroxide (H2O2): 0.002% maximum.
Water (KF): 0.1% maximum.
Melting point: -85C.
Boiling point: 124C.
Flash point: 39C.
Solubility: Miscible with water.


2-Methoxyethanol Analytical Reagent Grade:
Ethylene Glycol Monomethyl Ether
CH3OCH2CH2OH Formula Weight 76.10
CAS Number 109-86-4

REQUIREMENTS
Assay: 99.3% CH3OCH2CH2OH

MAXIMUM ALLOWABLE
Color (APHA): 10
Titrable acid: 0.002 meq/g.
Water: 0.1%

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.

We also manufacture and supply as under:

Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol

2,2-Dimethoxypropane

4-Methoxyphenol

3-Methoxy-1-Propanol

Methoxylamine hydrochloride

Methyl Myristate or Myristic Acid Methyl Ester

Diethylene Glycol Mono Ethyl Ether

Diethylene Glycol Mono Methyl Ether

Diethylene Glycol Mono Butyl Ether Acetate

Ethylene Glycol Monoethyl Ether.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 5 May, 2024

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Methyl Cellosolve or Ethylene Glycol Monomethyl Ether Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol SDS GHS, Material Safety Data Sheet
MSDS GHS, Material Safety Data Sheet
12-Sept-23

1. Product Identification

Product Name & Other Names: Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol.
CAS No.: 109-86-4
EINECS EC No.: 203-713-7
Molecular Formula: C3H8O2
Molecular Weight: 76.09
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
:

Flammable liquids (Category 3) H226
Acute toxicity, Oral (Category 4) H302
Acute toxicity, Dermal (Category 4), H312
Acute toxicity, Inhalation (Category 4), H332
Reproductive toxicity (Category 1B), H360FD
Specific target organ toxicity - single exposure (Category 1), Immune system, H370
Specific target organ toxicity - repeated exposure (Category 2), thymus, H373

Labeling according to Regulation (EC) No 1272/2008

GHS Label Elements
Flammable
Flammable

GHS Label Elements
Health Hazard
Health Hazard

GHS Label Elements
Irritant
Irritant

Signal Words: Danger

Hazard statements:
H226: Flammable liquid and vapor.
H302: Harmful if swallowed.
H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled.
H360FD May damage fertility. May damage the unborn child.
H370 Causes damage to organs (Immune system).
H373 May cause damage to organs (thymus) through prolonged or repeated exposure.

Precautionary statements:
P201: Obtain special instructions before use.
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/light/…/equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P370+378: In case of fire: Use water spray or fog for extinction.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbol(s):
Xn = Harmful
F = Extremely Flammable
R-phrase(s):
R10 Flammable.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R39 Danger of serious irreversible effects.
R60 May impair fertility.
R61 May cause harm to the unborn child.

3. Composition/Information on Ingredients

Product Name & Other Names: Methyl Cellosolve 2-Methoxyethanol Ethylene Glycol Monomethyl Ether Methyl Glycol.
CAS No.: 109-86-4
EINECS EC No.: 203-713-7

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Flammability of the Product: Flammable.
Flash Points: 39C.
Products of Combustion: Carbon oxides and fumes. Flash back possible over considerable distance., Container explosion may occur under fire conditions. Vapors may form explosive mixture with air.
Fire: Inflammable.
Explosion: Explosive in presence of heat.
Fire Extinguishing Media: Use water spray or fog, alcohol-resistant foam, dry chemical, or carbon dioxide. Flammable liquid and vapor. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas. Never direct a water jet in the container to prevent any splashing of the product which could cause spreading of the fire. Cool containing vessels with water spray to prevent pressure build-up, auto-ignition, or explosion.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container.
Small Spill: Avoid mist formation. Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Remove all sources of ignition. Provide proper ventilation. Absorb the material on a porous, inert material such as earth, sand, or vermiculite. Carefully sweep up the material without causing dust. Dispose of it in accordance with local regulations.

7. Handling and Storage

Precautions for safe handling: Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, strong bases, and metals. Keep the product in its original container well sealed, in a dry and ventilated area, away from potential sources of ignition and protected from light. Protect against physical damage. Air and moisture sensitive. Handle and store under inert gas. Storage: Room Temperature.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
ACGIH TWA: 0.1 ppm.
OSHA PEL TWA: 25 ppm.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colorless liquid.
Odor: Ether-like.
Odor threshold: Not available.
pH: 4-7 @ 20°C 200 g/l aq. sol.
Relative Density: Not available.
Boiling Point
: 124C.
Melting Point: -85C.
Flash point: 42C.
Auto-ignition temperature: 285C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Pressure (mm Hg): Not available.
Vapor Density (Air=1): Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.
Molecular Formula: C3H8O2
Molecular Weight: 76.09

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. Vapor/air-mixtures are explosive at intense warming. Reacts violently with Strong oxidizing agents, bases air.
Hazardous Decomposition Products: It emits Carbon oxides and fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, strong acids, strong bases, and metals.
Conditions to Avoid: Incompatibles, Direct sunlight, Air, Extremely high temperatures, Open flame, Overheating, Heat, Sparks.

11. Toxicological Information

Toxicity data
LD50 Oral - Rat - 890 mg/kg.
LC50 Inhalation - Rat - 7 h - 1478 mg/l.
LD50 Oral - Rabbit - 1280 mg/kg.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Epidemiology: No information found
Reproductive Effects: May damage the unborn child. May damage fertility.

12. Ecological Information

Toxicity to fish: static test LC50 - Lepomis macrochirus (Bluegill sunfish) - > 10.000 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: semi-static test EC50 - Daphnia magna (Water flea) - 27.000 mg/l - 48 h.
Persistence and Degradability: No information available. Persistence is unlikely.
Mobility: Will be mobile in the environment due to its water solubility.
Bioaccumulation/ Accumulation: No information available. Expected to degrade.
Results of PBT and vPvB assessment: No data available.

13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of containers and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA Classification:
UN Number: UN1188
Shipping Name: Ethylene glycol monomethyl ether
Hazard Class: 3; Packing Group: III.
Canada TDG Classification:
UN Number: UN1188
Shipping Name: Ethylene glycol monomethyl ether
Hazard Class: 3; Packing Group: III.
IATA & ADR/RID Europe
UN Number: UN1188
Shipping Name: Ethylene glycol monomethyl ether
Hazard Class: 3; Packing Group: III.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: Fire Hazard, Immediate Health Hazard Acute, Chronic Health Hazard.
California Prop. 65 Components: Listed.

16. Other Information

European Labeling in Accordance with EC Directives:
H226 Flammable liquid and vapor.
H302 Harmful if swallowed.
H302+H312+ H332 Harmful if swallowed, in contact with skin or if inhaled.
H360FD May damage fertility. May damage the unborn child.
H370 Causes damage to organs (Immune system).
H373 May cause damage to organs (thymus) through prolonged or repeated exposure.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbol(s):
Xn = Harmful
F = Extremely Flammable
R-phrase(s):
R10 Flammable.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R39 Danger of serious irreversible effects.
R60 May impair fertility.
R61 May cause harm to the unborn child.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************