Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate CAS Number 12007-60-2, EINECS EC Number: 234-514-3, Molecular Formula: Li2B4O7, Molecular Weight: 169.12, HS Code 28402000 or 28402090
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate Manufacturers
Lithium Tertaborate
Pure Lithium Borate or Dilithium Tertaborate Suppliers
General Properties and Specifications of Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate:
Appearance: White powder.
Assay as is basis: Not less than 98.0% and not more than 102.0% Li2B4O7
Phosphorus Compounds (as PO4): Not more than 0.004%
Silicon (Si): Not more than 0.01%
Aluminium (AI): Not more than 0.001%
Calcium (Ca): Not more than 0.01%
Iron (Fe): Not more than 0.001%
Magnesium (Mg): Not more than 5 ppm.
Potassium (K): Not more than 0.005%
Sodium (Na): Not more than 0.005%
Heavy Metals (as Pb): Not more than 0.001%
Relative Density: about 2.34
Melting Point: 917C (literature).
Solubility: Moderately soluble in water.
Storage: Store at room temperature.
We also manufacture and supply as under:
Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
31 May, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate
SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 31-May-24
1. Product Identification
Product Name & Other Names: Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate.
CAS Number: 12007-60-2
EINECS EC Number: 234-514-3
Molecular Formula: Li2B4O7
Molecular Weight: 169.12
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral Category 4 - H302
Serious eye damage Category 1 - H318
Reproductive toxicity Category 2 - H361
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
GHS Label Elements |
Signal Words: Danger
Hazard Statements:
H302: Harmful if swallowed.
H318: Causes serious eye damage.
H361: Suspected of damaging fertility or the unborn child.
Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P314: Get medical advice/attention if you feel unwell.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P403 P404: Store in well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container in accordance with local/national regulation.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Xn Harmful
Risk Phrase:
R22 Harmful if swallowed.
R41 Risk of serious damage to eyes.
R60 May impair fertility.
R61 May cause harm to the unborn child.
3. Composition/Information on Ingredients
Product Name & Other Names: Lithium Tertaborate or Lithium Borate or Dilithium Tertaborate.
CAS Number: 12007-60-2
EINECS EC Number: 234-514-3
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove affected person to fresh air; if normal breathing has not returned within a few minutes after exposure, get medical attention.
Skin: Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reuse. Seek medical attention.
Eyes: Immediately, flush eyes for 15 minutes in clear running water while holding eyelids open; seek medical attention immediately.
Ingestion: Drink two glasses of water followed by milk, milk of magnesia or other non-alcoholic liquids; Do not induce vomiting; seek medical attention immediately.
5. Fire Fighting Measures
General Hazards: Contact with eyes causes immediate severe irritation of the eye and eyelids.
Extinguishing Media: Carbon dioxide, dry chemical, chemical foam water fog. Do not use a heavy water stream. Keep containers cool by spraying with water. Use extinguishing media appropriate for surrounding fire.
Fire & Explosion Hazard: May evolve fumes under fire conditions. Lithium and Boron compounds will form.
Unusual Fire and Explosion Hazards: Closed containers can explode due to buildup of pressure when exposed to extreme heat. Cool containers to prevent pressure buildup and possible explosion when exposed to extreme heat.
Hazardous Combustion Products: Products of combustion include smoke, toxic fumes, Lithium and Boron compounds.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach, facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter sewer, soil, or water sources.
Methods and materials used for containment Clean-up procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container. It will support combustion. For large spills, confine spills, cover up with approved absorbent, shovel product into approved container for disposal.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids. Keep containers closed when not in use; protect containers from abuse; protect from extreme temperatures, open flames. Storage: Store at room temperature.
8. Exposure Controls/Personal Protection
Exposure Guidelines: ACGIH TLV TWA 2 mg/m3 STEL: 6 mg/m3.
Engineering Controls: The use of local exhaust ventilation is recommended to control emissions near the source. Provide mechanical ventilation of confined spaces. Use corrosion-resistant, explosion-proof ventilation equipment.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: White powder.
Odor: Odorless.
Odor threshold: Not applicable.
pH: Not available.
Relative density: about 2.34
Melting point/freezing point: 917C (literature).
Boiling Point: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Pressure (MM Hg): Not available.
Vapor Density (Air = 1) : Not available.
Evaporation Rate (water = 1) : Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Moderately soluble in water.
Viscosity: Not available.
Molecular Formula: Li2B4O7
Molecular Weight: 169.12
10. Stability and Reactivity
Stability: Stable at normal temperatures and operating conditions.
Conditions to Avoid: Avoid excessively high temperatures and contact with strong oxidizing agents.
Incompatibilities: Strong oxidizing agent. Strong acids.
Decomposition: May evolve fumes under fire conditions. Lithium and Boron compounds will form.
Polymerization: Polymerization will not occur.
11. Toxicological Information
LD50 Oral Rat: 500 mg/kg.
LD50 Dermal Rat: > 2,000 mg/kg
Reproduction: Suspected of damaging fertility. Suspected of damaging the unborn child.
Carcinogenicity: Not listed as a human carcinogen by OSHA, IARC, ACGIH & NTP.
Acute Toxicity: Not available.
12. Ecological Information
Toxicity to fish: static test LC50 - Cyprinus carpio (Carp) - > 100 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Dispose of it in accordance with Local, State, and Federal Regulations. Consult local, state, or Federal Environmental Protection Agency before disposing of any chemicals.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMDG/IMO & IATA/ICAO: Not dangerous goods.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed.
H318: Causes serious eye damage.
H361: Suspected of damaging fertility or the unborn child.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Xn Harmful
R22 Harmful if swallowed.
R41 Risk of serious damage to eyes.
R60 May impair fertility.
R61 May cause harm to the unborn child.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************