Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid CAS Number 503-74-2, EINECS EC Number: 207-975-3, Molecular Formula: C5H10O2, Molecular Weight: 102.13, FEMA Number 3102, HS Code 29156090 or 29156050 or 29159090
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid Manufacturers
Isovaleric Acid
Pure 3-Methylbutanoic Acid or 3-Methylbutyric Acid Suppliers
Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid is an organic compound. It occurs as colourless to pale yellow clear liquid. It has a penetrating odor.
General Properties and Specification of Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid:
Appearance: Colourless to pale yellow Clear liquid.
Purity: Not less than 99 %
Refractive index @ 20oC: 1.3990 to 1.4060
Relative Density: about: 0.93
Melting Point: -29-3C literature.
Boiling Point: 176.5C literature.
Flash Point: 70C.
Solubility: Slightly soluble in water.
Storage: Room Temperature. Recommended in a cool and dark place, <15C.
We also manufacture and supply as under:
Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid
N-Valeric Acid or N-Pentanoic Acid
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
16 December, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid
Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 16-Dec-24
Section 1: Product Identification
Product Name & Other Names: Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid.
CAS No.: 503-74-2
EINECS EC Number: 207-975-3
Molecular Weight: 102.13
Chemical Formula: C5H10O2
FEMA Number: 2559
Relevant identified uses of the substance or mixture and uses advised against: Laboratory chemicals, Manufacture of substances. For Industrial use.
Details of the supplier of the safety data sheet: As per letter head.
Section 2: Hazard Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 1A, B, C, H314
Labeling according to Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
Signal Words: Danger
Hazard Statements:
H314: Causes severe skin burns and eye damage.
Precautionary statements:
P234: Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P501: Dispose of contents/container to authorized agents only.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Risk Phrases:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.
Section 3: Composition / Information on Ingredients
Product Name & Other Names: Isovaleric Acid or 3-Methylbutanoic Acid or 3-Methylbutyric Acid.
CAS No.: 503-74-2
EINECS EC Number: 207-975-3
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush your eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician immediately. Wash clothing before reuse.
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt, or waistband. Get medical attention immediately.
Inhalation: If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Section 5: Fire Fighting Measures
Flash Point: 70C.
Fire Extinguishing Media: Adapt extinguishing media to the environment. Use water spray, alcohol-resistant foam, dry chemicals, or carbon dioxide. Avoid solid water jet as it can scatter the fire.
Special Fire Fighting Procedures: Wear self-contained breathing apparatus for firefighting if necessary.
Hazardous combustion products: Oxides of carbon and fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved people should evacuate to a safe place.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Eliminate any ignition sources.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove it into an approved disposal container. Small quantities of liquid spill may be neutralized with soda-ash solution. Wash away neutralized products with plentiful water. Clean contaminated surfaces with an excess of water. Take collected spill to manufacturer/competent authority.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep the container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original containers. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong bases, and Strong oxidizing agents. Storage: Room Temperature. Recommended in a cool and dark place, <15C.
Section 8: Exposure Controls / Personal Protection
Components with workplace control parameters: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Engineering Controls Ventilation required: It should be handled or transferred in an approved fume hood or with adequate ventilation.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion into the work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Appearance and Physical State: Colourless to pale yellow Clear liquid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about: 0.93
Melting Point: -29-3C literature.
Boiling Point: 176.5C literature.
Flash point: 70C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Pressure (mm Hg): Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Slightly soluble in water.
Viscosity: Not available.
Molecular Weight: 102.13
Chemical Formula: C5H10O2
Section 10: Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Materials to Avoid (Incompatibility): Strong bases, Strong reducing agents, and Strong oxidizing agents. Possibility of hazardous reactions Violent reactions possible with alkalis, oxidizing agents and reducing agents.
Hazardous Decomposition Products: Thermal decomposition may produce oxides of carbon and fumes.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Results of component toxicity test:
LD50 Oral - Rat - 2500 mg/kg.
Carcinogenicity: This product is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Toxicity to fish: static test LC50 - Pimephales promelas (fathead minnow) - 77 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 51,25 mg/l - 48 h.
Persistence and Degradability: Persistence is unlikely.
Mobility: Will likely be mobile in the environment due to its water solubility.
Biodegradability: Readily biodegradable.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13 Disposal Considerations
State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal. Follow all the pollution control rules.
Section 14: Transportation Information
DOT USA, TDG Canada & ADR/RID Europe:
Proper shipping name: Corrosive liquid, acidic, organic, n.o.s. (3-methylbutyric acid).
Hazard Class: 8, Packaging group: II, UN Number: UN 3265
IMO/IMDG & IATA:
Proper shipping name: Corrosive liquid, acidic, organic, n.o.s. (3-methylbutyric acid).
Hazard Class: 8, Packaging group: II, UN Number: UN 3265
Section 15: Regulatory Information
USA:
SARA Section 311/312 Hazard Classes: Immediate (acute) health hazard. See section 2.
California Proposition 65: None.
Section 16: Other Information
European Labeling in Accordance with EC Directives:
H314: Causes severe skin burns and eye damage.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Risk Phrases:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************