Colchicine USP BP Ph Eur Grade Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Colchicine, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Colchicine CAS Number 64-86-8, EINECS EC Number: 200-598-5, Molecular Formula: C22H25NO6, Molecular Weight: 399.44, HS Code 29398000
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Colchicine.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Colchicine Manufacturers
Colchicine
USP BP Ph Eur Grade Suppliers
General Properties and Specifications of Colchicine:
Appearance: White to yellow crystalline compound.
Solubility (Turbidity) 2% aq. solution: Clear colourless to pale yellow.
Solubility of 10% solution in methanol: Clear colourless to pale yellow.
Assay: 98.5% minimum.
Loss on drying: 3% maximum.
Sulfated Ash: 0.1% maximum.
Relative Density: about 1.3 predicted.
Melting Point: 147C to 160C literature.
Boiling Point: 726C predicted.
Solubility: Soluble in water.
Storage: 8C to 25C (Cool & dry area). Ok to freeze. Protect from light. Shipping may be at ambient temperature.
Colchicine USP Grade Specifications:
C22H25NO6 -- 399.44
Acetamide, N-(5,6,7,9-tetrahydro-1,2,3,10-tetramethoxy-9-oxobenzo[a]heptalen-7-yl)-, (S)-.
Colchicine CAS 64-86-8
UNII: SML2Y3J35T
Colchicine is an alkaloid contained in various species of Colchicum and in other genera. It contains not less than 94.0 percent and not more than 101.0 percent of C22H25NO6, calculated on the anhydrous, solvent-free basis.
[Caution— Colchicine is extremely poisonous.]
Packaging and storage— Preserve in tight, light-resistant containers.
Identification: Infrared Absorption.
Specific rotation: between −240° and −250°, calculated on the anhydrous, solvent-free basis.
Test solution: 10 mg per mL, in alcohol.
Water Determination: not more than 2.0%.
Limit of colchiceine: To 5 mL of a solution (1 in 100) add 2 drops of ferric chloride TS: no definite green color is produced.
Limit of ethyl acetate: To pass the test --- not more than 8.0% is found.
Residual solvents: meets the requirements, except that the limit of chloroform is 100 ppm.
Colchicine BP Ph Eur Grade Specifications:
C22H25NO6 --- 399.4 CAS 64-86-8
DEFINITION
(-)-N-[(7S,12aRa)-1,2,3,10-Tetramethoxy-9-oxo-5,6,7,9-tetrahydrobenzo[a]heptalen-7-yl]acetamide.
Content: 97.0 per cent to 102.0 per cent (anhydrous substance).
CHARACTERS
Appearance: Yellowish-white, amorphous or crystalline powder.
Solubility: Very soluble in water, rapidly recrystallising from concentrated solutions as the sesquihydrate, freely soluble in ethanol (96 per cent), practically insoluble in cyclohexane.
IDENTIFICATION
First identification: B
Second identification: A, C, D
A. Ultraviolet and visible absorption spectrophotometry.
B. Infrared absorption spectrophotometry.
C. To 0.5 mL of solution S (see Tests) add 0.5 mL of dilute hydrochloric acid and 0.15 mL of ferric chloride solution. The solution is yellow and becomes dark green on boiling for 30 s. Cool, add 2 mL of methylene chloride and shake. The organic layer is greenish yellow.
D. Dissolve about 30 mg in 1 mL of ethanol (96 per cent) and add 0.15 mL of ferric chloride solution. A brownish red colour develops.
Solution S: Dissolve 0.10 g in water and dilute to 20 mL with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 mL of solution S add 0.1 mL of bromothymol blue solution. Either the solution does not change colour or it becomes green. Not more than 0.1 mL of 0.01 M sodium hydroxide is required to change the colour of the indicator to blue.
Specific optical rotation: -235 to -250 (anhydrous substance).
Dissolve 50.0 mg in ethanol (96 per cent) and dilute to 10.0 mL with the same solvent.
Related substances: To pass the test.
Colchiceine: Maximum 0.2 per cent.
Chloroform: Maximum 500 ppm.
Ethyl acetate: Maximum 6.0 per cent m/m.
Water: Maximum 2.0 per cent, determined on 0.500 g.
Sulfated ash: Maximum 0.1 per cent, determined on 0.5 g.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
20 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Colchicine SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 29-Nov-23
Section 1. Product Information
Product Name/Trade Name: Colchicine.
CAS No.: 64-86-8
EINECS EC Number: 200-598-5
Chemical Formula: C22H25NO6
Molecular Weight: 399.44
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Germ cell mutagenicity Category 1A, 1B, H340
Acute toxicity, Oral (Category 2), H300
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Health Hazard |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H340 May cause genetic defects.
H300 Fatal if swallowed.
Precautionary statements:
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P270: Do not eat, drink, or smoke when using this product.
P281: Use personal protective equipment as required.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
T+ Toxic
Xn Harmful
Risk Phrase:
R46 May cause inheritable genetic damage.
R28 = Very toxic if swallowed.
Section 3: Composition and Information on Ingredients
Product Name/Trade Name: Colchicine.
CAS No.: 64-86-8
EINECS EC Number: 200-598-5
Section 4. First Aid & Procedure
Always get medical attention after the first aid is over.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.
Section 5. Fire Fighting Measures
Flash Point: N/A. However, it can burn at high temperature.
Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides & Nitrogen oxides may evolve.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6. Spills and Disposals
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Section 7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Storage: 8C to 25C (Cool & dry area). Ok to freeze. Protect from light. Shipping may be at ambient temperature.
Section 8. Exposure Controls & Personal Protection
Exposure Limits: No data available.
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
Section 9. Physical & Chemical Data
Physical State: White to yellow crystalline compound.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.3 predicted.
Melting Point: 147C to 160C literature.
Initial boiling point and boiling range: 726C predicted.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in water: Soluble in water.
Viscosity: Not available.
Chemical Formula: C22H25NO6
Molecular Weight: 399.44
Section 10. Stability and Reactivity
Chemical Stability: Stable under recommended temperatures and pressures.
Incompatibility (Materials to Avoid): Oxidizing agents.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat, and light.
Hazardous Decomposition Products: Carbon oxides, Nitrogen oxides.
Hazardous Polymerization: Will not occur.
Section 11. Toxicological Information
Toxicity to Animals: LD50 Oral - Rat - 26 mg/kg.
Carcinogenicity: Not classifiable as to its carcinogenicity to humans.
Specific target organ toxicity: May cause genetic defects. Fatal if swallowed.
Section 12. Ecological Information
Ecotoxicity: No data available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
Environmental Precautions: DO NOT DISCHARGE into drains and rivers.
Section 13. Disposal Suggestions
Dispose of in accordance with all applicable local, state, and federal regulations at an approved waste disposal facility.
Section 14. Transport and Label Information
DOT USA, TDG Canada & ADR/RID Europe:
UN number: 1544
Hazard class: 6.1; Packing group: I
Proper shipping name: Alkaloids, solid, n.o.s. (Colchicine).
IMDG/IMO:
UN number: 1544
Hazard class: 6.1; Packing group: I
Proper shipping name: Alkaloids, solid, n.o.s. (Colchicine).
IATA:
UN number: 1544
Hazard class: 6.1; Packing group: I
Proper shipping name: Alkaloids, solid, n.o.s. (Colchicine).
Section 15. Regulatory Information
USA:
SARA 311/312: Chronic Health Hazard.
California Prop.65: WARNING! This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Hydroxyurea.
Section 16. Other Information
European Labeling in Accordance with EC Directives:
H340 May cause genetic defects.
H300 Fatal if swallowed.
Hazard Symbol:
T+ Toxic
Xn Harmful
Risk Phrase:
R46 May cause inheritable genetic damage.
R28 = Very toxic if swallowed.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************