Absorbable Dusting Powder USP Grade Manufacturers, SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Absorbable Dusting Powder, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Absorbable Dusting Powder: CAS Number: yyyyy, EINECS EC Number: yyyyy, Molecular Formula: yyyyy, Molecular Weight: yyyyy, HS Code ---**
How big is your requirement or how small
We serve it all.
Specifications, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for Absorbable Dusting Powder.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Absorbable Dusting Powder Manufacturers
Absorbable Dusting Powder
Pure USP Grade Suppliers
Absorbable Dusting Powder USP
Absorbable Dusting Powder is an absorbable powder prepared by processing cornstarch and intended for use as a lubricant for surgical gloves. It contains not more than 2.0 percent of magnesium oxide.
Identification: A 1 in 10 suspension is colored purplish blue to deep blue by iodine.
Stability to autoclaving: Transfer about 2 g to a suitable paper packet, and seal or close the packet with a double fold. Wrap the paper packet in muslin, transfer to an autoclave, heat to 121C for 30 minutes, and cool: the powder is not caked, and any lumps are easily crushed between the fingers.Sedimentation: Boil 100 mL of a 1 in 10 suspension in water for 20 minutes. Cool, transfer to a 100-mL graduated cylinder, dilute with water to volume, and allow to stand undisturbed for 24 hours: the volume occupied by the settled Powder is between 45 mL and 75 mL.
pH: between 10.0 and 10.8, in a 1 in 10 suspension.
Loss on drying: Dry about 2 g, accurately weighed, at 105C to constant weight: it loses not more than 12% of its weight.
Residue on ignition: Heat about 1 g, accurately weighed, in a covered platinum crucible until most of the carbon is burned away, but do not ignite the sample. Remove the cover, and ignite to constant weight: not more than 3.0% of residue remains.
Assay for magnesium oxide: Weigh accurately about 2.5 g, and transfer to a beaker. Add 25 mL of water and 2 mL of 3 N hydrochloric acid, and stir the mixture for 5 minutes. Add 5 mL of hydroxylamine hydrochloride solution (1 in 10), 15 mL of ammonia-ammonium chloride, 5 mL of potassium cyanide solution (1 in 10), and 5 drops of eriochrome black, mix, and titrate with 0.05 M edetate disodium until the solution becomes distinctly blue in color. Each mL of 0.05 M edetate disodium is equivalent to 2.015 mg of MgO.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last :
2 April, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Absorbable Dusting Powder SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 27-Sep-2020
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Absorbable Dusting Powder
Relevant uses and uses advised against (if any): Industrial and Laboratory use only.
Supplier: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Ingredient 1: Corn Starch, Maize Starch
CAS #: 9005-25-8
EINECS EC Number: 232-679-6
% by Weight: >95%
Ingredient 2: Magnesium Oxide
CAS Number: 1309-48-4
EINECS EC Number: 215-171-9
Molecular Formula: MgO
Molecular Weight: 40.3
% by Weight: <5%
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt, or waistband.
Section 5: Fire and Explosion Data
Flammability of the Product: Non Flammable.
Products of Combustion: Not available.
Risks of explosion of the product in presence of mechanical impact: Not available.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use solid water jet.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled material in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Exposure Limits for Starch:
TWA: 10 (mg/m3) from ACGIH (TLV) [United States] [1999] Inhalation Total.
TWA: 10 (mg/m3) [Canada] Inhalation Total.
TWA: 10 (mg/m3) from NIOSH Inhalation Total.
TWA: 5 (mg/m3) from NIOSH Inhalation Respirable.
TWA: 15 (mg/m3) from OSHA (PEL) [United States] Inhalation Total.
TWA: 5 (mg/m3) from OSHA (PEL) [United States] Inhalation Respirable. Consult local authorities for acceptable exposure limits.
Exposure Limits for Magnesium Oxide:
Magnesium oxide CAS # 1309-48-4 TWA Control parameter 10 mg/m3 USA. Basis: ACGIH Threshold Limit Values (TLV)
Magnesium Oxide CAS # 1309-48-4 TWA Control parameter 15 mg/m3 Basis: US (OSHA) 29 CFR 1910.1000 Table Z-1 Limits for Air Contaminants.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
Section 9: Physical and Chemical Properties
Physical state and appearance: White powdered solid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting Point: Decomposes.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in cold water, hot water.
Viscosity: Not available.
Section 10: Stability and Reactivity Data
Stability: It is stable.
Instability Temperature: Not available.
Conditions of Instability: Excess heat, incompatible materials.
Incompatibility with various substances: Reactive with oxidizing agents.
Corrosivity: Not available.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals for Starch:
LD50 Intraperitoneal - Mouse - 6,600 mg/kg
LC50: Not available.
Toxicity to Animals for Magnesium Oxide:
LD50 Oral - Rat - 3990 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with environmental control regulations.
Section 14: Transport Information
DOT (USA) & ADR/RID Europe: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods.
Section 15: Other Regulatory Information
USA: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Sec: 313.
SARA 311/312 Hazards: No SARA Hazards.
Disclaimer:
**************************
Our company provides this Absorbable Dusting Powder SDS MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************