Magnesium Sulphate BP Ph Eur Grade Manufacturers

Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals

Bookmark this Web Site

Search our website here:

---------

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Magnesium Sulfate Magnesium Sulphate
British Pharmacopoeia
Dried Magnesium Sulphate

Dried Magnesium Sulphate BP Ph Eur Magnesium Sulfate Grade Specifications

DEFINITION
Dried Magnesium Sulphate contains not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying magnesium sulphate at 100° until it has lost approximately 25% of its weight.

CHARACTERISTICS
A white powder.
Freely soluble in water; dissolves more rapidly in hot water.

IDENTIFICATION
Yields the reactions characteristic of magnesium salts and of sulphates.

TESTS
Acidity or alkalinity
To 10 ml of a 7.5% w/v solution in carbon dioxide-free water add 0.05 ml of phenol red solution. Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M sodium hydroxide VS is required to change the colour of the solution.
Arsenic
0.33 g dissolved in 25 ml of water complies with the limit test for arsenic, (3 ppm).
Heavy metals
Dissolve 1.3 g in 20 ml of water and add 1 g of ammonium chloride. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
Iron
0.33 g dissolved in 10 ml of water complies with the limit test for iron, Appendix VII (30 ppm).
Chloride
0.13 g dissolved in 15 ml of water complies with the limit test for chlorides, Appendix VII (400 ppm).
Insoluble matter
7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which becomes clear in a few minutes.

Magnesium Sulphate Heptahydrate BP Ph Eur Grade Specifications

Epsom Salts
MgSO4,7H2O 246.5 CAS 10034-99-8
Action and use
Osmotic laxative; used in treatment of electrolyte deficiency.

CHARACTERS
Appearance
White or almost white, crystalline powder or brilliant, colourless crystals.
Solubility
Freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. It gives the reactions of sulphates.
B. It gives the reaction of magnesium.

TESTS
Solution S
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.05 ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Chlorides
Maximum 300 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.
Loss on drying
48.0 per cent to 52.0 per cent, determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at 400°C to constant mass.

Magnesium Sulphate BP Grade Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.