Barium Sulfate Manufacturers, Barium Sulphate IP BP JP Barium Sulfate USP |
Supplier, Manufacturer, Exporter of Barium Sulfate or Barium Sulphate IP BP JP Ph Eur USP Analytical Reagent, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugall, Bangladesh, etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Barium Sulfate CAS Number 7727-43-7, EINECS EC Number 231-784-4, HS code 283327**, Molecular Weight 233.4, Chemical Formula BaSO4
Also available in customized micron size like 0.8 micron, 1 micron, 10 micron etc.
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for Barium Sulfate.
Buy Barium sulfate, Barium sulphate, Door Delivery
For MSDS Sheet Click MSDS of Barium Sulfate Sulphate BP IP USP Analytical Reagent Manufacturers
Barium Sulfate
Technical & Pure Barium Sulphate
Also IP BP JP Ph. Eur. USP Analytical Reagent Suppliers
Barium Sulphate BP
BaSO4 --- 233.4 --- 7727-43-7
CHARACTERS
Appearance<br>
Fine, white or almost white powder, free from gritty particles.
Solubility
Practically insoluble in water and in organic solvents. It is very slightly soluble in acids and in solutions of alkali hydroxides.
IDENTIFICATION
A. Boil a suspension of 0.2 g with 5 ml of a 500 g/l solution of sodium carbonate for 5 min, add 10 ml of water, filter and acidify a part of the filtrate with dilute hydrochloric acid. The solution gives the reactions of sulphates.
B. Wash the residue collected in the preceding test with 3 successive small quantities of water. To the residue add 5 ml of dilute hydrochloric acid, filter and add to the filtrate 0.3 ml of dilute sulphuric acid. A white precipitate is formed that is insoluble in dilute sodium hydroxide solution.
TESTS
Solution S
To 20.0 g add 40 ml of distilled water and 60 ml of dilute acetic acid. Boil for 5 min, filter and dilute the cooled filtrate to 100 ml with distilled water.
Acidity or alkalinity
Heat 5.0 g with 20 ml of carbon dioxide-free water on a water-bath for 5 min and filter. To 10 ml of the filtrate add 0.05 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Acid-soluble substances
Maximum 0.3 per cent.
Oxidizable sulphur compounds
Shake 1.0 g with 5 ml of water for 30 s and filter. To the filtrate add 0.1 ml of starch solution, dissolve 0.1 g of potassium iodide in the mixture, add 1.0 ml of a freshly prepared 3.6 mg/l solution of potassium iodate and 1 ml of 1 M hydrochloric acid and shake well. The colour of the solution is more intense than that of a standard prepared at the same time and in the same manner, but omitting the potassium iodate.
Soluble Barium salts
Maximum 10 ppm.
Heavy metals
Maximum 10 ppm.
Loss on ignition
Maximum 2.0 per cent, determined on 1.0 g at 600 ± 50 C.
Barium Sulfate USP
Barium Sulfate USP
BaSO4 233.39
Sulfuric acid, barium salt (1:1).
Barium sulfate (1:1) [7727-43-7].
Barium Sulfate contains not less than 97.5 percent and not more than 100.5 percent of BaSO4.
Identification—
A: Mix 0.5 g with 2 g each of anhydrous sodium carbonate and anhydrous potassium carbonate, heat the mixture in a crucible until fusion is complete, treat the resulting fused mass with hot water and filter: the filtrate, acidified with hydrochloric acid, meets the requirements of the tests for Sulfate.
B: Dissolve a portion of the well-washed residue from Identification test A in 6 N acetic acid: the solution meets the requirements of the tests for Barium.
pH: between 3.5 and 10.0, in a 10% (w/w) aqueous suspension.
Heavy metals— Boil 4.0 g with a mixture of 2 mL of glacial acetic acid and 48 mL of water for 10 minutes. Dilute with water to 50 mL, filter, and use 25 mL of the filtrate: the limit is 0.001%.
Limit of sulfide— To 10 g in a 500-mL conical flask add 100 mL of 0.3 N hydrochloric acid. Cover the mouth of the flask with a circle of filter paper that has been moistened at the area over the mouth of the flask with 0.15 mL of lead acetate TS, the paper being held in place with a string tied around the neck of the flask. Boil the mixture gently for 10 minutes, taking care to avoid spattering the paper. Any darkening of the paper is not greater than that produced by a similarly treated control consisting of 100 mL of 0.3 N hydrochloric acid containing 5 :g of sulfide: not more than 0.5µg per g is found.
Limit of acid-soluble substances— Cool the mixture obtained in the test for Limit of sulfide, add water to restore approximately the original volume, and filter it through paper that previously has been washed with a mixture of 10 mL of 3 N hydrochloric acid and 90 mL of water, returning the first portions, if necessary, to obtain a clear filtrate. Evaporate 50 mL of the filtrate on a steam bath to dryness, and add 2 drops of hydrochloric acid and 10 mL of hot water. Filter again through acid washed paper, prepared as directed above, wash the filter with 10 mL of hot water, and evaporate the combined filtrate and washings in a tarred dish on a steam bath to dryness. The residue, when dried at 105 for 1 hour, weighs not more than 15 mg: not more than 0.3% of acid-soluble substances is found.
Limit of soluble Barium salts— Treat the residue obtained in the test for Limit of acid-soluble substances with 10 mL of water, pass the solution through a filter previously washed with 100 mL of 0.3 N hydrochloric acid, and add 0.5 mL of 2 N sulfuric acid. Any turbidity formed within 30 minutes is not greater than that produced in a similarly treated control consisting of 10 mL of water containing 0.5 mL of 2 N sulfuric acid and 50 :g of barium: not more than 0.001% of soluble barium salts is found.
We manufacture and supply as under:
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last :
27 June, 2024
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Barium Sulfate Manufacturers; Barium Sulphate Manufacturers