|
(FDA) GMP Approved
ISO-9001-2008
Certificate
"REACH"
Pre-registered
Halal Certified
|
Mubychem Group, established in
1976, is the pioneer manufacturer of Zinc Chloride, Ammonium
Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate,
Sodium Thiosulphate, Pharmaceutical, Fragrance & Flavor chemicals in
India. Mubychem Group has
several manufacturing facilities spread across Gujarat and Maharashtra (Western India).
|
For Translating this page in your language use this
translation tool (Refresh if the tool is not seen).
|
Buy Trisodium Phosphate Tribasic; Door Delivery
Sodium Phosphate USP BP IP ACS FCC
Tri Sodium Phosphate Technical
Tri Sodium
Phosphate MSDS Trisodium Phosphate
1. Product Identification
Synonyms:
Trisodium Phosphate, 12-Hydrate; Phosphoric Acid, Trisodium Salt, Dodecahydrate
Tri Sodium Phosphate
CAS No.: 7601-54-9 (Anhydrous) 10101-89-0 (Dodecahydrate)
Molecular Weight: 380.12
Chemical Formula: Na3PO4 . 12H2O
2. Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous
--------------------------------------- ------------ ------------ ---------
Sodium Phosphate, Tribasic 7601-54-9 98 - 100% Yes
Tri Sodium Phosphate
Trisodium Phosphate
3. Hazards Identification
Emergency
Overview
--------------------------
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND
RESPIRATORY TRACT.
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
Inhalation:
Tri Sodium Phosphate causes irritation to the respiratory tract. Symptoms may include coughing,
shortness of breath. Behaves as a moderately strong alkali; intense exposure may
result in the destruction of mucous membranes. May cause asthmatic bronchitis,
chemical pneumonitis, or pulmonary edema.
Ingestion:
Trisodium Phosphate causes irritation to the gastrointestinal tract. Symptoms may include nausea,
vomiting and diarrhea. May cause mild burning of mouth, throat, and stomach. Its
alkaline nature may injure the esophagus and digestive tract. Aqueous, highly
alkaline solutions may produce caustic burns.
Skin Contact:
Tri Sodium Phosphate causes irritation to skin. Symptoms include redness, itching, and pain. Extent
of damage depends on duration of contact. More serious effects may occur if the
skin is moist. Aqueous, highly alkaline solutions may produce caustic burns.
Eye Contact:
Trisodium Phosphate causes irritation to eyes, may be severe with possible corneal damage. Aqueous,
highly alkaline solutions may produce caustic burns.
Chronic Exposure:
Repeated exposure of Trisodium Phosphate may cause symptoms similar to those listed for acute effects.
May cause permanent tissue damage to the skin and eyes.
Aggravation of Pre-existing Conditions:
No information found.
4. First Aid Measures
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention.
Ingestion:
Do NOT induce vomiting. Give large amounts of water. Never give anything by
mouth to an unconscious person. Get medical attention.
Skin Contact:
Immediately flush skin with plenty of soap and water for at least 15 minutes.
Remove contaminated clothing and shoes. Get medical attention. Wash clothing
before reuse. Thoroughly clean shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting
lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire:
Trisodium Phosphate is not considered to be a fire hazard.
Explosion: Tri Sodium Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire over
Tri Sodium Phosphate.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full face piece operated in the pressure
demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill
of Trisodium Phosphate. Wear appropriate personal protective equipment
as specified in Section 8. Spills: Sweep up and containerize for reclamation or
disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. US
Regulations (CERCLA) require reporting spills and releases to soil, water and
air in excess of reportable quantities. The toll free number for the US Coast
Guard National Response Center is (800) 424-8802.
7. Handling and Storage
Keep
Tri Sodium Phosphate in a
tightly closed container, stored in a cool, dry, ventilated area. Protect
Trisodium Phosphate against physical damage. Containers of
Tri Sodium Phosphate may be hazardous when empty
since they retain product residues (dust, solids); observe all warnings and
precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne
Exposure Limits: Trisodium phosphate or Tri Sodium Phosphate:
-AIHA Workplace Environmental Exposure Limit:
5 mg/m3 (15-minute STEL)
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee
exposures below the Airborne Exposure Limits. Local exhaust ventilation is
generally preferred because it can control the emissions of the contaminant at
its source, preventing dispersion of it into the general work area. Please refer
to the ACGIH document, Industrial Ventilation, A Manual of Recommended
Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a
full face piece respirator with high efficiency particulate filter (NIOSH type
N100 filter) may be worn up to 50 times the exposure limit or the maximum use
concentration specified by the appropriate regulatory agency or respirator
supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting
fluids, glycerin, etc.) are present, use a NIOSH type Ror P filter. For
emergencies or instances where the exposure levels are not known, use a
full-face piece positive-pressure, air-supplied respirator. WARNING: Air
purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or
coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing
of solutions is possible. Maintain eye wash fountain and quick-drench facilities
in work area.
9. Physical and Chemical Properties
Appearance:
Tri Sodium Phosphate is white crystalline solid.
Odor: Trisodium Phosphate is odorless.
Solubility: Appreciable (> 10%)
Specific Gravity:
1.62
pH: Strongly alkaline.
% Volatiles by volume @ 21C (70F):
0
Boiling Point:
Decomposes.
Melting Point: 73.3 - 76.7C (163 - 171F)
Vapor Density (Air=1): Not applicable.
Vapor Pressure (mm Hg): Not applicable.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability:
Trisodium Phosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization:
Will not occur for
Tri Sodium Phosphate.
Incompatibilities: Trisodium
Phosphate reacts violently with water and acids to liberate heat.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Trisodium Phosphate: Investigated as a mutagen. Trisodium Phosphate,
Dodecahydrate: 7400 mg/kg oral rat LD50.
12. Ecological Information
Environmental Fate:
No information found.
Environmental Toxicity:
No information found.
13. Disposal Considerations
Whatever
cannot be saved for recovery or recycling should be managed in an appropriate
and approved waste disposal facility. Processing, use or contamination of this
product may change the waste management options. State and local disposal
regulations may differ from federal disposal regulations. Dispose of container
and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Not
regulated.
15. Regulatory Information
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: Yes Fire: No Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
16. Other Information
NFPA
Ratings: Health: 2 Flammability:
0 Reactivity: 1
Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND
RESPIRATORY TRACT.
Label Precautions:
Avoid contact with eyes, skin and clothing.
Wash thoroughly after
handling. Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Label First Aid:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give
anything by mouth to an unconscious person. If inhaled, remove to fresh air. If
not breathing, give artificial respiration. If breathing is difficult, give
oxygen. In case of contact, immediately flush eyes or skin with plenty of water
for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing
before reuse. In all cases, get medical attention.
Disclaimer:
******************************************************************************************************
Our company provides this Tri Sodium Phosphate, Trisodium Phosphate
Tribasic MSDS information contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This Tri Sodium Phosphate,
Trisodium Phosphate Tribasic document is intended only as a guide to the
appropriate precautionary handling of the material by a properly trained
person using this product. Individuals receiving the information must
exercise their independent judgment in determining its appropriateness for a
particular purpose.
******************************************************************************************************
Buy Trisodium Phosphate Tribasic; Door Delivery
Trisodium Phosphate USP BP IP ACS FCC
More from Trisodium Phosphate manufacturer at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009,
INDIA.
TEL: (OFFICE) 91-22-23774610, 23726950, 23723564.
FAX: 91-22-23728264.
e-mail:
info@mubychem.com
Cell Call to Anmol:
+91-9821870100 or Ambrish: +91-9821570100