Sodium Bicarbonate USP FCC Grade Manufacturers

Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals

Bookmark this Web Site

Search our website here:

---------

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Sodium Bicarbonate USP Grade Specifications NaHCO3

NaHCO3
Sodium Bicarbonate USP
84.01
Carbonic acid monosodium salt
Monosodium carbonate

Sodium Bicarbonate contains not less than 99.0 percent and not more than 100.5 percent of NaHCO3, calculated on the dried basis.

Labeling— Where Sodium Bicarbonate is intended for use in hem dialysis, it is so labeled.
Identification— A solution of it meets the requirements of the tests for Sodium 191 and for Bicarbonate.
Loss on drying— Dry about 4 g, accurately weighed, over silica gel for 4 hours: it loses not more than 0.25% of its weight.
Insoluble substances— Dissolve 1 g in 20 mL of water: the resulting solution is complete and clear.
Carbonate (where it is labeled as intended for use in hem dialysis)— The limit of carbonate is not more than 0.23%. to be determined as per tests defined.
Normal carbonate— Add 2.0 mL of 0.10 N hydrochloric acid and 2 drops of phenolphthalein TS to 1.0 g of Sodium Bicarbonate, previously dissolved without agitation in 20 mL of water at a temperature not exceeding 15 : the solution does not assume more than a faint pink color immediately.
Chloride—: a 0.35-g portion shows no more chloride than corresponds to 1.48 mL of 0.0010 N hydrochloric acid (0.015%).
Limit of sulfur compounds— To pass the test
Aluminum (where it is labeled as intended for use in hem dialysis)— The limit is 2 µg per g.
Arsenic— The limit is 2 µg per g.
Calcium and magnesium (where it is labeled as intended for use in hem dialysis)
— the percentage of Ca in the specimen limit is 0.01%.
— the percentage of Mg in the specimen the limit is 0.004%.
Copper (where it is labeled as intended for use in hem dialysis)— Cu in the specimen the limit is 1 µg per g.
Iron (where it is labeled as intended for use in hem dialysis)— not more than 5µg per g.
Heavy metals—the limit is 5 µg per g.
Limit of ammonia— to pass the test
Limit of organics (where it is labeled as intended for use in hem dialysis)— To pass the test

Sodium Bicarbonate FCC Food Grade Specifications

Sodium Hydrogen Carbonate; Baking Soda.
Sodium Bicarbonate FCC
NaHCO3 Formula wt 84.01
INS: 500(ii) CAS: [144-55-8]

DESCRIPTION
Sodium Bicarbonate occurs as a white, crystalline powder. It is stable in dry air, but it slowly decomposes in moist air. One gram dissolves in 10 mL of water. It is insoluble in alcohol. Its solutions, when freshly prepared with cold water without shaking, are alkaline to litmus. The alkalinity increases as the solutions stand, are agitated, or are heated.
Function: pH control agent; leavening agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Bicarbonate.
Assay: Not less than 99.0% and not more than 100.5% of NaHCO3 after drying.
Ammonia: Passes test.
Insoluble: Substances Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.25%.

Sodium Bicarbonate USP FCC Grade manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

If you want your work to be done well, then go to a busy man. The other one has no time.