Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Search our website here
Sodium Acetate Anhydrous SDS MSDS Sheet
Buy Sodium Acetate; Door Delivery
MSDS of Sodium Acetate Anhydrous Manufacturers
Specifications and Uses of Sodium Acetate Anhydrous Trihydrate & IP Grade
Sodium Acetate Trihydrate Anhydrous BP IP USP ACS AR Analytical Reagent GR FCC Food Grade Manufacturers Specifications
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Acetate and various other chemicals in India. Mubychem Group has manufacturing facilities spread across Western India. We know Sodium Acetate better than any other vendor in the world.
Sodium Acetate Anhydrous SDS MSDS Sheet, Materaial Safety Data Sheet
1. Product Identification
Synonyms: Sodium acetate anhydrous; Acetic acid sodium salt anhydrous.
CAS No.: 127-09-3 (Anhydrous); 6131-90-4 (Trihydrate)
EINECS: EC Number: 204-823-8
Molecular Weight: 82.03
Chemical Formula: CH3COONa
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May cause mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
OSHA Hazards: Not considered highly hazardous by OSHA.
HMIS Perceived: Health hazard: 1; Flammability: 1; Physical hazards: 0
NFPA Perceived: Health hazard: 1; Fire: 1; Reactivity Hazard: 0
3. Composition/Information on Ingredients
Ingredient: Sodium acetate anhydrous
CAS No.: 127-09-3 (Anhydrous)
EINECS: EC Number: 204-823-8
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Flammability of the Product: May pose a fire hazard when exposed to elevated temperatures or by contact with an ignition source.
Auto-Ignition Temperature: >600C.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: It emits toxic oxides of carbon and acetic acid when heated to decomposition.
Fire: Sodium acetate trihydrate may ignite at high temperatures.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Sodium acetate anhydrous in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established. Limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Sodium acetate anhydrous white or powder or granules.
Solubility: Readily soluble in water.
pH: 6-10 at 1% solution at 25 C (77F)
Molecular Weight: 82.03
Molecular Formula: CH3COONa
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not available
Melting Point: 324C
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Sodium acetate anhydrous is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium acetate anhydrous may emit fumes of acetic acid upon heating and on contact with strong acids. Oxides of carbon are released on decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Nitric acid, fluoride, potassium nitrate, strong oxidizers and diketene.
Conditions to Avoid: Moisture, Heat, Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
LD50 Oral - rat - 3,530 mg/kg
LC50 Inhalation - rat - 1 h - > 30,000 mg/m3
LD50 Dermal - rabbit - > 10,000 mg/kg
Special Remarks on Toxicity to Animals: Not available.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
12. Ecological Information
Toxicity to fish
LC50 - Pimephales promelas (fathead minnow) - 13,330 mg/l - 120 h
LC50 - Lepomis macrochirus (Bluegill) - 5,000 mg/l - 24 h
LC50 Lepomis macrochirus: 5000 mg/l – 24 h
LC50 Bluegill/Sunfish: 5000 mg/l; 24 h
Toxicity to daphnia
Water Flea Data: 48 Hr EC50 water flea: 5800 mg/l 48 h
Biodegradability: 99 % - Readily biodegradable
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT (USA) & ADR/RID: Not Regulated
IMDG: Not Regulated
IATA: Not Regulated
15. Regulatory Information
USA: OSHA Hazards: No hazard as per OSHA.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: Not listed.
TSCA: CAS# 7727-21-1 is listed on the TSCA inventory.
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Massachusetts Right To Know Components: No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components: Sodium acetate, CAS-No. 127-09-3
New Jersey Right To Know Components: Sodium acetate, CAS-No. 127-09-3
Canada - DSL/NDSL
CAS# 127-09-3 is listed on Canada's DSL List
Canadian WHMIS Classifications: D2B
EINECS: EC Number: 204-823-8
Section 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 21 August, 2017
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again