CAS Number: 9067-32-7, Sodium Hyaluronate or Hyaluronic Acid Sodium Salt BP USP NF Grade Manufacturers, SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Sodium Hyaluronate or Hyaluronic Acid Sodium Salt, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. Orders of Small and Bulk quantities are served. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals

Bookmark this Web Site

---------

Sodium Hyaluronate or Hyaluronic Acid Sodium Salt: CAS Number: 9067-32-7, EINECS EC Number: yyyyy, Molecular Formula: C28H44N2NaO23, Molecular Weight: 799.641, HS Code ---**

This is a computer translation of our webpage. For clarification and Safety Data sheet, SDS, MSDS please visit our English Page Sodium Hyaluronate or Hyaluronic Acid Sodium Salt Manufacturers.

Sodium hyaluronate is the sodium salt of hyaluronic acid. It is a glycosaminoglycan and long-chain polymer of disaccharide units of Na-glucuronate-N-acetylglucosamine. Sodium hyaluronate is similar to the fluid that surrounds the joints in your body. This fluid acts as a lubricant and shock absorber for the joints. Sodium hyaluronate is used to treat knee pain caused by osteoarthritis.

Sodium Hyaluronate BP Ph Eur Grade Specifications
Ph Eur monograph
(C14H20NNaO11)n --- CAS 9067-32-7
Action and use: High viscosity mucopolysaccharide.

DEFINITION
Sodium salt of hyaluronic acid, a glycosaminoglycan consisting of D-glucuronic acid and Nacetyl- D-glucosamine disaccharide units.
Content: 95.0 per cent to 105.0 per cent (dried substance).
Intrinsic viscosity: 90 per cent to 120 per cent of the value stated on the label.

PRODUCTION
It is extracted from cocks' combs or obtained by fermentation from Streptococci, Lancefield Groups A and C. When produced by fermentation of gram-positive bacteria, the process must be shown to reduce or eliminate pyrogenic or inflammatory components of the cell wall.

CHARACTERS
Appearance: White or almost white, very hygroscopic powder or fibrous aggregate.
Solubility: Sparingly soluble or soluble in water, practically insoluble in acetone and in anhydrous ethanol.

IDENTIFICATION
A. Infrared absorption spectrophotometry. ComparisonıPh. Eur. reference spectrum of sodium hyaluronate.
B. It gives reaction of sodium.

TESTS
Solution S: Weigh a quantity of the substance to be examined equivalent to 0.10 g of the dried substance and add 30.0 ml of a 9 g/l solution of sodium chloride. Mix gently on a shaker until dissolved (about 12 h).
Appearance of solution: Solution S is clear and its absorbance at 600 nm is not greater than 0.01.
pH: 5.0 to 8.5.
Dissolve the substance to be examined in carbon dioxide-free water to obtain a solution containing a quantity equivalent to 5 mg of the dried substance per millilitre.
Intrinsic viscosity: To pass the test.
Sulphated glycosaminoglycans: Maximum 1 per cent, if the product is extracted from cocks' combs.
Nucleic acids: The absorbance of solution S at 260 nm is maximum 0.5.
Protein: Maximum 0.3 per cent; maximum 0.1 per cent, if intended for use in the manufacture of parenteral preparations.
Chlorides: Maximum 0.5 per cent.
Iron: Maximum 80.0 ppm.
Heavy metals: Maximum 20 ppm; maximum 10 ppm if intended for use in the manufacture of parenteral preparations.
Loss on drying: Maximum 20.0 per cent, determined on 0.500 g by drying at 100-110C over diphosphorus pentoxide for 6 h.
Microbial contamination: Total viable aerobic count not more than 100 micro-organisms per gram. Use 1 g of the substance to be examined.
Bacterial endotoxins: Less than 0.5 IU/mg, if intended for use in the manufacture of parenteral preparations without a further appropriate procedure for the removal of bacterial endotoxins; less than 0.05 IU/mg, if intended for use in the manufacture of intra-ocular preparations or intra-articular preparations without a further appropriate procedure for the removal of bacterial endotoxins.

STORAGE
In an airtight container, protected from light and humidity. If the substance is sterile, store in a sterile, airtight, tamper-proof container.

Sodium Hyaluronate USP NF Grade can also be offered.

Exporters to Korea Japan Mongolia China Taiwan USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912265290100, +912265290101
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Copyright and Usual Disclaimer is Applicable, January 31, 2026