Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Thailand, Malaysia etc. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Search our website here
Iron Sulphide Ferrous Sulfide SDS MSDS Sheet
Buy Iron Sulphide; Door Delivery
Iron Sulphide Ferrous Sulfide Sulphide Manufacturers Specifications
Iron Sulphide SDS GHS, MSDS Sheet Ferrous Sulfide Material Safety Data Sheet
Section 1 - Chemical Product and Identification
MSDS Name: Iron Sulphide
Synonyms: Ferrous sulfide
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead above.
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
OSHA Hazards: No known OSHA hazards.
Section 3 - Composition, Information on Ingredients
Chemical Name: Iron Sulphide or Ferrous Sulfide
Section 4 - First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Antidote: None reported.
Section 5 - Fire Fighting Measures
General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam.
Flash Point: Not applicable.
Auto ignition Temperature: Not applicable.
Explosion Limits, Lower: Not available.
Upper: Not available.
NFPA (Perceived) Health: 0; Flammability: 0; Instability: 0
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.
Section 7 - Handling and Storage
Handling: Use Ferrous sulfide with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store Iron Sulphide in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: For Iron Sulphide or Ferrous sulfide use adequate ventilation to keep airborne concentrations low.
WEL: Short-term value: 2 mg/m³; Long-term value: 1 mg/m³ as Fe
ACGIH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
NIOSH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
OSHA - Final PELs: None listed
OSHA Vacated PELs: Iron (II) Sulfide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - Physical and Chemical Properties
Physical State: Solid
Appearance: Iron Sulphide or Ferrous sulfide is gray to brown black
Odor: None reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Decomposes.
Freezing/Melting Point: 1194 deg C
Solubility: It is insoluble in water.
Specific Gravity/Density: 2 gm/cm³
Molecular Formula: FeS
Molecular Weight: 87.907
Section 10 - Stability and Reactivity
Chemical Stability: Iron Sulphide or Ferrous sulfide is stable under normal temperatures and pressures.
Conditions to Avoid: Moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials: Strong acids.
Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide.
Hazardous Polymerization: Has not been reported for Iron Sulphide or Ferrous sulfide.
Section 11 - Toxicological Information
RTECS#: CAS# 1317-37-9 unlisted.
LD50 Oral - Rat - female: > 2.000 mg/kg
LD50 Dermal - Rat - male and female: > 2.000 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenic: No data available.
Mutagenic: No data available.
Section 12 - Ecological Information
LC50-Gambusia affinis (Mosquito fish): > 10.000 mg/l – 96.0 h
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
Section 15 - Regulatory Information
TSCA: CAS# 1317-37-9 is listed on the TSCA inventory.
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
MASSACHUSETTS RIGHT TO KNOW COMPONENETS: No components are subject to the Massachusetts Right to Know Act.
PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Iron sulphide
NEW JERSEY RIGHT TO KNOW COMPONENTS: Iron sulphide
CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
HMIS (Perceived): Health Hazard: 0, Fire Hazard: 0, Reactivity: 0
NFPA (Perceived): Health: 0, Flammability: 0, Reactivity: 0
Canadian WHMIS Classifications: -
EC code EINECS/ELINCS: 215-268-6
Section 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950; FAX: 91-22-23728264
Current Date Time in India GMT+5:30 hours
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 21 July, 2016
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Ferrous Sulfide Iron Shulphide Manufacturers