Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Thailand, Malaysia etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
ISO9001 ISO14001 OHSAS18001 ISO 22000 HACCP FSSC22000 GMP fssai HACCP halal jkkosher allergen free

 

Search our website here

Home --------- Contact Us

Chemical Products

Shipping Cargo Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Calcium Chloride Brine Solution Manufacturers

Calcium Chloride IP
Calcium Chloride BP
Calcium Chloride USP
Calcium Chloride Fused
Calcium Chloride Dihydrate
Calcium Chloride Anhydrous
Calcium Chloride Hexahydrate
Calcium Chloride Brine Solution
Calcium Chloride Manufacturers
Calcium Chloride FCC Food Grade
Calcium Chloride ACS AR Grade Manufacturers

Calcium Chloride BP USP ACS Analytical Reagent Food Grade Manufacturers
Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution IP Grade Manufacturers Specifications & Uses

For MSDS Sheet Click
CaCl2 Anhydrous MSDS Sheet
CaCl2 Fused Dihydrate MSDS Sheet
CaCl2 Hexahydrate Solution MSDS Sheet

Muby Chemicals, established in 1976, is the pioneer manufacturer of Chlorides, and particularly Calcium Chloride including Calcium Chloride Solution, Solid Fused Anhydrous Dihydrate, Hexahydrate & Calcium Chloride IP BP USP ACS Analytical Grade FCC Food Grade, Lumps, Pellets, Granules, Powder, Brine etc. We know about Calcium Chloride better than any other vendor in the world.

We manufacture all grades of Calcium Chloride in all grades like Solid, Fused, Porous, Anhydrous, Brine, Solution, Dihydrate Hexahydrate including pharmacopoeia grades like IP BP USP EP and even in food grade FCC and in analytical reagent grade AR or ACS. Below is the specifications and other details of Calcium Chloride Brine or solution. Links are also available for other grades of Calcium Chloride on this page and on other pages of our website.

Calcium Chloride Brine Calcium Chloride Solution

Calcium Chloride and glycol have been successfully used over the years and there are applications where both secondary coolants have an advantage. To a much lesser degree other heat transfer mediums such as methyl alcohol and sodium chloride have also been utilized.

In regards to energy efficiency, Calcium Chloride is the better choice. Its heat transfer coefficient is much better than glycol. This fact equates to smaller, less expensive chillers for the same heat transfer. The heat transfer in the floor piping system is also better. Due to the superior heat transfer characteristics, the brine pump can be smaller and the required pump horsepower and corresponding energy consumption is reduced with calcium chloride.

A Brine may be defined as liquid of low freezing point used in transmission of refrigeration without change of state. The brines commonly employed in refrigeration are Calcium Chloride and Sodium Chloride. Sodium Chloride is cheaper but cannot be used below minus 15C. Calcium Chloride of commercial grade can operate satisfactorily up to minus 40C or minus 40F. Use of Calcium Chloride above 33% should be avoided as it results in crystallization resulting in reduced efficiency. The material selected should be adjusted to pH of around 8 and it should be free from free-acid and dirt. Coloured CaCl2 material should not be used as it results in corrosion and scaling of the tubes. For the same reason by-product material is not desirable as it contains Organic Chlorides which may break into Hydrogen Chloride./p>

Corrosion in closed systems can be largely overcome by the addition of sodium dichromate, Na2Cr207-2H2O. Enough caustic is added to make the brines slightly alkaline. Open calcium brine systems may be protected by adding zinc dust a little at a time.

Enough caustic is added to make the brines slightly alkaline. The buyer must insist that the brine supplied by the vendor is having a pH of >7
An inhibitor may be added to the brine to prevent corrosion of the equipment.
1 ton brine needs 1.2 kg of Sodium Dichromate in closed brine system. (100 lb. required per 1000 cu.ft. of calcium chloride brine).
1 ton brine needs 0.75 kg of Zinc Dust in open brine system. (60 lb./1000 cu.ft. a little at a time).

Other applications include sprinkling to parking lots, dirt roads, driveways and construction sites. Calcium Chloride Brine will control dust. It creates a barrier between ice/snow and the surface, helping to prevent freezing and making snow removal easier. It will save time and money, and is more efficient than other available products. Calcium Chloride brine is also used for making organo-calcium compounds like calcium stearate, calcium octate, calcium naphthenate etc.

The recommended specifications for the Calcium Chloride Brine are
Calcium Chloride solution of specific gravity about 1.3
pH should be >7
Assay of Calcium Chloride as received 30-33%
Dry basis assay of Calcium Chloride >98%

Calcium Chloride Refrigeration or Calcium Chloride Brine Grade

A Brine may be defined as liquid of low freezing point used in transmission of refrigeration without change of state. The brines commonly employed in refrigeration are Calcium Chloride CaCl2 and Sodium Chloride. Sodium Chloride is cheaper but cannot be used below minus 15C. CaCl2 of commercial grade can operate satisfactorily up to minus 40C. Use of CaCl2 above 33% should be avoided as it results in crystallization resulting in reduced efficiency. The CaCl2 selected should be adjusted to pH of around 8 and it should be free from free-acid and dirt. Coloured material should not be used as it results in corrosion and scaling of the tubes. For the same reason by-product CaCl2 is not desirable as it contains Organic Chlorides which may break into Hydrogen Chloride.

Calcium Chloride Brine manufacturers,
Calcium Chloride Solution manufacturers at:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA & Canadian Customers may
e-mail: usa@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 18 August, 2017

Exporter & Importer Exporters & Improters By Air Exports Calcium Chloride Dihydrate BP USP ACS AR Analytical Reagent FCC Food grade Manufacturers Calcium Chloride Anhydrous Desiccant Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.