|
(FDA) GMP Approved
ISO-9001-2008
Certificate
"REACH"
Pre-registered
Halal Certified
|
Mubychem Group, established in
1976, is the pioneer manufacturer of Zinc Chloride, Ammonium
Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate,
Sodium Thiosulphate, Pharmaceutical, Fragrance & Flavor chemicals in
India. Mubychem Group has
several manufacturing facilities spread across Gujarat and Maharashtra (Western India). |
For Translating this page in your language use this
translation tool (Refresh if the tool is not seen).
|
Buy
Monopotassium Phosphate; Door Delivery
Specifications
of Monopotassium
Phosphate
Potassium Phosphate USP BP IP FCC ACS
MSDS; Material Safety Data Sheet
MONO POTASSIUM
PHOSPHATE MONOPOTASSIUM PHOSPHATE
1. Product Identification
Synonyms: Phosphoric acid monopotassium salt;
Potassium dihydrogen phosphate; Mono Potassium Phosphate
CAS No.: 7778-77-0
Molecular Weight: 136.09
Chemical Formula: KH2PO4
2. Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous
------------------------------ ------------ ------------ ---------
Monopotassium Phosphate Monobasic 7778-77-0 99 - 100% Yes
or Mono Potassium Phosphate
3. Hazards Identification
Emergency Overview
--------------------------
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT. MAY BE
HARMFUL IF SWALLOWED OR INHALED.
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
----------------------------------
Inhalation: Mono Potassium Phosphate may cause mild irritation to the respiratory tract.
Ingestion: Phosphates are slowly and incompletely absorbed when ingested,
and seldom result in systemic effects. Such effects, however, have occurred.
Symptoms may include vomiting, lethargy, diarrhea, blood chemistry effects,
cardiac effects and central nervous system effects. The toxicity of phosphates
is because of their ability to sequester calcium. Acute potassium intoxication
by mouth is rare because large single doses usually induce vomiting and because
in the absence of pre-existing kidney damage, potassium is rapidly excreted.
Potassium poisoning can result in heart effects, change in respiration rate,
tingling in the extremities, heaviness in the limbs, nausea and diarrhea.
Skin Contact: Monopotassium Phosphate is irritant due to its acidic nature.
Mono Potassium Phosphate may cause inflammation
and pain on prolonged contact, especially with moist skin.
Eye Contact: Mono Potassium Phosphate may cause irritation, redness and pain.
Chronic Exposure: Monopotassium Phosphate may sequester calcium and cause calcium phosphate
deposits in the kidneys.
Aggravation of Pre-existing Conditions: Persons with impaired kidney
function may be more susceptible to the effects of Monopotassium Phosphate.
4. First Aid Measures
Inhalation:
Remove to fresh air. Get medical
attention for any breathing difficulty.
Ingestion:
If Mono Potassium Phosphate is swallowed, give several glasses of water to drink to
dilute. If large amounts were swallowed or symptoms occur, get medical advice.
Never give anything by mouth to an unconscious person.
Skin Contact: Immediately flush skin with plenty of water for at least 15
minutes. Remove contaminated clothing and shoes. Wash clothing before reuse.
Thoroughly clean shoes before reuse. Get medical attention if irritation
develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15
minutes, lifting upper and lower eyelids occasionally. Get medical attention if
irritation persists.
5. Fire Fighting Measures
Fire:
Monopotassium Phosphate is not considered to be a fire hazard.
Explosion: Mono Potassium Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing
surrounding fire over Mono Potassium Phosphate.
Special Information:
In the event of a fire over Monopotassium Phosphate, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or
spill of Mono Potassium Phosphate. Wear appropriate personal protective equipment as specified in Section 8.
Spills: Pick up and place in a suitable container for reclamation or disposal,
using a method that does not generate dust.
7. Handling and Storage
Keep Monopotassium Phosphate in a tightly closed container, stored in a cool, dry,
ventilated area. Protect against physical damage. Containers of Mono Potassium
Phosphate
may be hazardous when empty since they retain product residues (dust, solids);
observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
None established for
Monopotassium Phosphate.
Ventilation System:
A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of
Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
For conditions of use where
exposure to dust or mist is apparent and engineering controls are not feasible,
a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil
particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a
NIOSH type R or P filter. For emergencies or instances where the exposure levels
are not known, use a full-face positive-pressure, air-supplied respirator.
WARNING: Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and
quick-drench facilities in work area of Monopotassium Phosphate.
9. Physical and Chemical Properties
Appearance: Monopotassium
Phosphate is white granular powder.
Odor: Mono Potassium Phosphate is odorless.
Solubility: Mono Potassium Phosphate is soluble 22 g in 100 g of water.
Density: Mono Potassium Phosphate has specific gravity of 2.34
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 400C (752F) Loses water and becomes metaphosphate
Melting Point: 253C (487F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found on
Monopotassium Phosphate.
10. Stability and Reactivity
Stability: Mono Potassium Phosphate is stable under ordinary conditions of use
and storage.
Hazardous Decomposition Products: Phosphorus oxides may form when heated
to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities: No incompatibility data found
for Monopotassium Phosphate.
Conditions to Avoid: No information found.
11. Toxicological Information
For Potassium Phosphate Monobasic or Monopotassium
Phosphate: >4640 mg/kg skin rabbit
LD50
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity:
No information found for
Monopotassium Phosphate.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should
be managed in an appropriate and approved waste disposal facility. Processing,
use or contamination of this product may change the waste management options.
State and local disposal regulations may differ from federal disposal
regulations. Dispose of Monopotassium Phosphate container and unused contents in accordance with
federal, state and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
16. Other Information
NFPA Ratings:
Health: 1 Flammability: 0
Reactivity: 0
Label Hazard Warning:
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT. MAY BE
HARMFUL IF SWALLOWED OR INHALED.
Label Precautions:
Avoid contact with eyes, skin and clothing.
Wash thoroughly after handling.
Avoid breathing dust.
Keep container closed.
Use with adequate ventilation.
Label First Aid:
If inhaled, remove to fresh air. Get medical attention for any breathing
difficulty. In case of contact, immediately flush eyes or skin with plenty of
water for at least 15 minutes. Get medical attention if irritation develops or
persists. If swallowed, give several glasses of water to drink to dilute. If
large amounts were swallowed or symptoms occur, get medical advice. Never give
anything by mouth to an unconscious person.
Disclaimer:
************************************************************************************************************
Our company provides this MONO POTASSIUM
PHOSPHATE MONOBASIC or MONOPOTASSIUM PHOSPHATE MSDS information contained herein in good faith
but makes
no representation as to its comprehensiveness or accuracy. This
MONO POTASSIUM
PHOSPHATE MONOBASIC or MONOPOTASSIUM PHOSPHATE MSDS document is intended only as a guide to the appropriate precautionary
handling of the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
************************************************************************************************************
Buy
Monopotassium Phosphate; Door Delivery
Commercial Information, Specifications and Uses of Monopotassium phosphate
More from Monopotassium Phosphate manufacturer at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009,
INDIA.
TEL: (OFFICE) 91-22-23774610, 23726950, 23723564.
FAX: 91-22-23728264.
e-mail:
info@mubychem.com
Cell Call to Anmol:
+91-9821870100 or Ambrish: +91-9821570100
Copyright
and Usual
Disclaimer
is Applicable.
Last
updated: 29 April, 2010.
Monopotassium
Phosphate
Monopotassium Phosphate