Flax Seed Oil Virgin Linseed Oil Pure & BP FCC Food Grade Manufacturers, with SDS, MSDS Sheet

Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.
The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Flax Seed Oil Linseed Oil: CAS Number: 8001-26-1, EINECS EC Number: 232-278-6, Molecular Formula: yyyyy, Molecular Weight: yyyyy, HS Code ---**

How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail prices, Uses etc available on these pages for Flax Seed Oil Linseed Oil.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Flax Seed Oil Linseed Oil Manufacturers

Flax Seed Oil, Virgin Linseed Oil
Pure BP Food Grade Suppliers
flax seed oil linseed oil

Linseed oil, also known as flaxseed oil or flax oil, is a colorless to yellowish oil obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The oil is obtained by pressing, sometimes followed by solvent extraction. Linseed oil is a drying oil, meaning it can polymerize into a solid form.

Virgin Linseed Oil BP Grade
Ph Eur

DEFINITION
Fatty oil obtained by cold expression from ripe seeds of Linum usitatissimum L. A suitable antioxidant may be added.

CHARACTERS
Appearance: Clear, yellow or brownish-yellow liquid, on exposure to air turning dark and gradually  thickening. When cooled, it becomes a soft mass at about - 20 °C.
Solubility: Very slightly soluble in ethanol (96 per cent), miscible with light petroleum.
Relative density: About 0.931.
Refractive index: About 1.480.

IDENTIFICATION
First identification B, C.
Second identification A, B.
A. Identification of fatty oils by thin-layer chromatography
B. Iodine value (see Tests).
C. Composition of fatty acids (see Tests).

TESTS
Acid value:  Maximum 4.5.
Iodine value: 160 to 200.
Peroxide value:  Maximum 15.0.
Saponification value: 188 to 195; carry out the saponification for 1 h.
Unsaponifiable matter: Maximum 1.5 per cent, determined on 5.0 g.
Composition of fatty acids: Gas chromatography.
Composition of the fatty-acid fraction of the oil:
fatty acids with a chain length less than C16: maximum 1.0 per cent
palmitic acid : 3.0 per cent to 8.0 per cent
palmitoleic acid : maximum 1.0 per cent
stearic acid : 2.0 per cent to 8.0 per cent
oleic acid : 11.0 per cent to 35.0 per cent
linoleic acid : 11.0 per cent to 24.0 per cent
linolenic acid : 35.0 per cent to 65.0 per cent
arachidic acid: maximum 1.0 per cent.
Cadmium: Maximum 0.5 ppm.
Water:  Maximum 0.1 per cent, determined on 1.00 g.

STORAGE
In an airtight container, protected from light.

Linseed Oil of FCC Food Grade is also offered.

Contact

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 21 August, 2022

Exporter & Importer By Air Exports Exporters & Improters flax seed oil linseed oil manufacturers

Essential Oils
Aniseoil Ajowan Essential Oil
Almond Oil Aniseed Oil or Anise oil
Archisoil Black Cumin Seed Oil
Cajuput Oil Camphor Oil
Capsicum Tincture  
Caraway Oil Cardamom Oil
Capsicum Oleoresin Cassia Oil
Castor Oil Cedar Wood Oil
Chaulmoogra Oil Cinnamon Oil
Citronella Oil Coriander Oil
Clove Oil Creosote Oil
Dil Oilor Anethi Oil Eucaplytus Oil
Evening Primerose Oil  
Fennel Oil Flaxseed Oil or Linseed Oil
Ginger Oil Grapeseed Oil
Jojoba Oil Juniper Oil
Kokum Oil or Kokum Butter Lemongrass Oil
Malkangni Oil Mentha Oil
Mint Oil Neem Oil
Nutmeg Oil Olive Oil
Orange Oil Palm Oil
Palmarosa Oil Peppermint
Pine Oil Rosemary Oil
Rose Oil Sesame Oil
Soybean Oil Spear Mint Oil
Sunflower Oil Turpentine
Tea Tree Oil Thyme Oil
Terpineol Oil Wheat Germ Oil
Winter Green Oil  

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Linseed Oil or Flexseed Oil SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
09-Dec-20

1. Product Identification

Product Name & Other Names: Linseed oil or Flexseed oil.
CAS No.: 8001-26-1
EINECS EC Number: 232-278-6
Relevant uses and uses advised against (if any): Industrial Manufacturing Use.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2B, H320

Labeling according Regulation (EC) No 1272/2008 [CLP]

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H315: Causes skin irritation.
H320: Causes eye irritation.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbol:
Xi = Irritant.
R-phrases:
R36/38 Irritating to eye and skin.

3. Composition/Information on Ingredients

Product Name & Other Names: Linseed oil or Flexseed oil.
CAS No.: 8001-26-1
EINECS EC Number: 232-278-6

4. First Aid Measures

Always seek medical advice after the first aid treatment.

Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Ingestion: Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean. folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard though it will burn at high temperatures.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Fire Protection: Keep away from ignition sources and naked flame.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkalis.
Fire Protection: Keep away from ignition sources and naked flame.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: TWA 10 mg/m3 USA NIOSH Recommended Exposure Limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the dust or mist is apparent, a half-face dust/mist respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Yellow to brown liquid.
Odor: Characteristic.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.93
Boiling Point: >315C
Melting Point: -24C
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in water
Viscosity: Not available.

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Polymerization: Will not occur.
Incompatibilities: Forms shock-sensitive mixtures with certain other materials., Chlorine, Zinc, Oxidizing agents.
Conditions to Avoid: Heat and incompatibilities.

11. Toxicological Information

Toxicity to Animals: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with legal requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMDG/IMO: Not dangerous goods.
IATA/IMO: Not dangerous goods.

15. Regulatory Information

USA:
California Proposition 65: Not listed.
SARA 311/312 Hazards: See section 2.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H315: Causes skin irritation.
H320: Causes eye irritation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbol:
Xi = Irritant.
R-phrases:
R36/38 Irritating to eye and skin.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************